Porte-cablu orizontal pentru cabluri Ø 2 până la 6 mm - Compozit gri

The Scanstrut DS-H6 horizontal deck gland is designed to provide professional waterproofing when routing cables through a deck or bulkhead on a boat. It protects connections from water ingress and helps maintain cable integrity.

The Scanstrut DS-H6 deck plug is made of gray composite, a robust and durable material specifically designed to withstand marine environmental conditions.

The Scanstrut DS-H6 is specifically designed for horizontal installation, allowing cable routing flat across a surface such as a deck or bulkhead.

The DS-H6 through-hull kit includes:

An upper housingA base sealA blank plug to drillFive pre-drilled plugs for 2, 3, 4, 5 and 6 mm cablesThree self-tapping screwsOne M4x12 bolt

Yes, the DS-H6 deck gland is designed to provide professional sealing. It comes with a sealing gasket and specific plugs to protect the cable passage from water infiltration.

The DS-H6 deck gland is compatible with cables with a diameter between 2 and 6 mm. Pre-drilled plugs are provided for diameters 2, 3, 4, 5 and 6 mm.

No, the DS-H6 DS-H6 bulkhead fitting is designed for passing a single cable at a time. One single cap is used per bulkhead fitting to ensure optimal watertightness.

Yes, the DS-H6 deck gland is ideal for wiring antennas, sensors, small electrical bundles or other marine applications requiring the passage of a small-diameter cable (2 to 6 mm).

Installing the DS-H6 through-hull requires drilling a 28.50 mm (1.12 inches) hole in the mounting surface.

For the installation of the DS-H6 deck pass-through, you will need the following tools:

A Pozi screwdriver Du silicone (for sealing) Drill bits of ø2.5 mm (3/32”), ø3 mm (1/8”) and ø10 mm (25/64”) A 3 mm (1/8”) Allen key

You must select the pre-drilled bung whose diameter is the closest and slightly larger or equal to your cable’s diameter to ensure optimal sealing. The kit includes bungs for diameters 2, 3, 4, 5, and 6 mm.

If the diameter of your cable does not match the pre-drilled stoppers provided, you can use the blank stopper included in the kit. This can be custom-drilled to the exact diameter of your cable.

Yes, using silicone is recommended during installation to ensure a perfect seal between the through-hull base and the mounting surface, preventing any water infiltration.

Yes, as a Scanstrut product designed for the marine sector and made of composite, the DS-H6 is specifically engineered to withstand harsh marine conditions, including UV exposure, saltwater, and weathering.

The main difference lies in the maximum supported cable diameter. The DS-H6 is designed for cables from 2 to 6 mm, while the DS-H10 is suitable for larger diameters, up to 10 mm. The DS-H6 provides a more compact solution for smaller diameters.