Trecător orizontal pentru cabluri de 6 până la 10 mm - Gri

The Scanstrut DS-HD10 cable gland is a professional-grade sealing solution designed for passing two cables through a deck or marine bulkhead. It ensures a clean installation and protects the boat's interior from water ingress and external elements.

The Scanstrut DS-HD10 cable gland is specifically designed to accommodate two cables simultaneously, providing a dual solution for installations requiring the passage of multiple cables of similar size.

The Scanstrut DS-HD10 cable gland has a length of 75.1 mm (2.95 inches) and a width of 66.5 mm (2.61 inches). Its height or depth is 28.5 mm (1.12 inches).

The Scanstrut DS-HD10 cable gland is gray, allowing it to blend discreetly into most dashboards and decks.

The primary function of the DS-HD10 cable gland is to ensure optimal watertightness for the passage of two marine cables, thereby protecting electronic equipment and the boat's interior from water ingress, UV rays, and spray.

The DS-HD10 cable gland is manufactured by Scanstrut using robust and durable materials designed to withstand UV exposure, salt spray, and mechanical stress in a marine environment.

Yes, the Scanstrut DS-HD10 cable gland is designed to resist UV exposure, ensuring durability and maintaining its properties and color even after prolonged sun exposure.

The Scanstrut DS-HD10 cable gland is compatible with cables having a diameter between 6 mm and 10 mm (0.23 to 0.39 inches).

The DS-HD10 cable gland comes with a set of 12 bungies (6 pairs), including pairs for the following cable diameters: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, as well as blank bungies (without holes) to seal an unused passage or for customization.

Yes, the DS-HD10 is a complement to other products in the Scanstrut range. It provides a dual solution for installations similar to those using the DS-H6 (for a single 2–6 mm cable) or the DS-H10 (for a single 6–10 mm cable).

Yes, this cable gland can be installed on various materials. It is compatible with soft materials (such as plywood), hard materials (such as fiberglass, hardwoods, acrylic) and metal surfaces (such as steel and aluminum). The screw fastening method may vary depending on the material type.

To install the Scanstrut DS-HD10 cable gland, you need to drill a 32 mm (1-1/4 inch) diameter hole.

For installation, you will need the following tools: a Pozidriv screwdriver, silicone, 2.5 mm (3/32 inch) or 3 mm (1/8 inch) drill bits depending on the surface material, and a hole saw or 32 mm (1-1/4 inch) drill bit.

Four self-tapping screws No. 6 x 16 are included in the package for mounting the cable gland base on soft or hard materials.

No, for installation on metal surfaces (such as steel or aluminum), it is recommended to use M3 countersunk bolts longer than 12 mm with a washer and Nyloc nut. These components are not included in the package and must be purchased separately.

You must choose the bungee with the diameter closest to that of your cable. The cable gland comes with pairs of bungees in different sizes (6 mm, 7 mm, 8 mm, 9 mm, 10 mm) and blank bungees to suit your needs.

Yes, it is important to deburr the drilled hole carefully before installing the cable gland. This ensures a smooth surface and better adhesion for optimal watertightness.

Waterproofing is ensured by several elements: the two-part design of the cable gland with an integrated gasket, the use of bungs sized to match the exact diameter of each cable, and the recommended application of silicone when securing the base to the surface.

The footprint, or the surface area covered by the cable gland once installed, is 75.1 mm long by 66.5 mm wide. A cutting template is provided in the instructions to simplify positioning and installation.