Trecător pentru conectoare până la Ø30 mm, cablu 9-14 mm - compozit negru

The Scanstrut DS30-P-BLK deck gland is a marine accessory designed to ensure watertight cable and connector passage through a boat's deck. It protects connections from water and external elements, ensuring the durability and reliability of your onboard electrical or electronic installation.

This deck gland is designed to accommodate cables with a diameter between 9 and 14 mm (0.35 to 0.55 inches).

The Scanstrut DS30-P-BLK deck gland is suitable for connectors with a maximum diameter of 30 mm (1.18 in).

The DS30-P-BLK deck plug is made of black composite. This material provides excellent resistance to UV rays and demanding marine environments.

For installation, you will need the following tools:

A Pozidriv screwdriver
A 30 mm (1.18 in) hole saw
A 2.5 mm (3/32 in) drill bit for soft materials (plywood, etc.) or a 3 mm (1/8 in) drill bit for hard materials (fiberglass, acrylic, hardwood)
Sealant silicone

Yes, using sealant is required to ensure a perfectly watertight installation of the deck-through fitting on your boat's deck, in addition to the supplied gasket.

The kit includes 4 sealing glands (bungs) of different sizes. You must select the gland whose inner diameter is closest to that of your cable to ensure optimal sealing around the cable.

Yes, the deck pass-through is made of black composite, a material chosen for its high resistance to UV rays and the demanding conditions of the marine environment, ensuring durability and a professional finish.

Yes, the deck pass-through is designed for simplified installation. It consists of two parts (hull and base) with an integrated sealing gasket, and the provided instructions are clear. The required tools are common, and installation can be performed by someone with basic DIY skills.

The '-P-BLK' suffix indicates that the deck plate is made of black composite (Plastic-Black). Stainless steel versions are usually identified by the '-S' suffix. The composite version offers an excellent weight-to-strength ratio, a discreet finish, and is often preferred for dark decks or for aesthetic reasons, while also providing excellent corrosion resistance.

Yes, this deck hatch can be installed on various deck materials, whether soft (such as plywood) or hard (such as fiberglass, acrylic, or hardwood). It is important to use the appropriate pilot hole drill bit diameter based on your deck material.

This model belongs to the 'vertical' through-hull family, meaning it is primarily designed for cable routing through a horizontal surface such as a boat deck.

Yes, it is recommended to freeze the through-hull fitting (bung) before drilling it. This will make the material more rigid and facilitate a clean and precise cut to fit the diameter of your cable if none of the supplied bungs match perfectly.

Yes, the kit includes a sealing gasket which, when combined with the application of silicone during installation, ensures a perfect watertight seal for the cable passage between the deck gland and the boat's deck.

The deck gland is designed with an integrated sealing gasket in its two-part construction (hull and base), which contributes to overall watertight integrity. Additionally, a sealing gasket is included in the kit to be positioned between the deck gland and the boat’s deck, further enhancing protection against water ingress.

Yes, the DS30-P-BLK is part of the Scanstrut thru-hull family, which includes other models such as the DS6, DS16, DS21A, DS21B, and DS40. The DS30 is an intermediate model in the range, offering a 30 mm connector pass-through diameter.