Kit ROKK Mini - Suport smartphone pentru montare la nivel

The ROKK Mini Kit is designed to accommodate smartphones with a width between 45 mm and 95 mm (1.77 to 3.74 inches). This wide compatibility range allows mounting most market models, with or without a protective case. The ratchet clamp adjusts easily to your device's thickness.

Yes, the ROKK Mini accommodates smartphones with a maximum width of 95 mm. If your phone, including its case, does not exceed this width, it can be installed without issue. The ratchet clamp and rubber anti-slip coating ensure a secure hold even with a thick case.

The ROKK Mini mount can support a maximum load of 1.2 kg (2.65 lbs). This capacity is more than sufficient for all smartphones on the market, including heavy-duty models such as foldable phones or rugged devices.

For installation, you will need:

A 2.5 mm drill bit (3/32 inch) to pre-drill the holes A Pozidriv screwdriver to screw in the base Marine-grade sealant (recommended for watertight marine installation) A 5 mm Allen key to secure the mount body to the base These tools are not included in the kit.

Yes, the ROKK Mini offers 360° rotation. You can therefore position your smartphone in the orientation of your choice, whether in portrait or landscape mode, for optimal visibility while sailing.

Yes, this mount is designed by Scanstrut, a brand specializing in marine equipment. It withstands harsh conditions in a nautical environment: vibrations, spray, UV, and temperature fluctuations. The screwed mounting provides solid mechanical strength, ideal for motorboats or sailboats.

This specific model (ref. RLS-509-401) is supplied with a screw-down base (RLS-401) and four self-tapping screws. It is not the adhesive-mount model. If you prefer a no-drill installation, Scanstrut also offers the ROKK Mini Adhesive Mount with 3M high-performance adhesive.

Yes, the screw-down base can be mounted on any flat surface, whether horizontal or vertical. Just ensure no obstacles interfere with the movement or removal of the mount body. For vertical installation, confirm the surface is strong enough to support the phone's weight.

Yes, the ROKK Mini accommodates smartphones with a width of 45 to 95 mm. Recent iPhones, including Pro Max models, fall within this range. For example, an iPhone 15 Pro Max measures approximately 77.6 mm in width, which is fully compatible, even with a case.

Yes, the kit includes a phone clamp that attaches to the mount body. The clamp is designed to open and close easily with a ratchet system, allowing quick insertion and removal of your smartphone.

The base holes have a diameter of 4.2 mm (0.17 in). To pre-drill, use a 2.5 mm (3/32 in) drill bit to prevent cracking the mounting surface. The provided self-tapping screws #4 x 20 are suitable for these dimensions.

Yes, the ROKK Mini can be mounted on any rigid flat surface, such as the deck of a kayak or paddleboard, provided you can drill and secure it firmly. However, for lightweight boats, ensure the surface is thick enough to accommodate the screws without risking penetration on the other side.

To preserve the longevity of the mount, rinse it with fresh water after each use at sea to remove salt and residue. Use a soft cloth and soapy water if necessary. Avoid abrasive products that could damage the rubber coating or finish.

Yes, the Samsung Galaxy S24 Ultra measures approximately 79 mm in width, which falls within the 45 to 95 mm range of the ROKK Mini. It can be installed without issue, even with a standard protective case.