Încărcător Blue Smart IP65s 12/5

The Victron Energy Blue Smart IP65 Charger 12/5 delivers an output voltage of 12V and a charge current of 5 amperes. It is designed for efficient and optimized battery charging.

The IP65 certification indicates that the charger is protected against dust and low-pressure water jets from all directions. This means it is waterproof, dustproof, and resistant to chemicals, making it suitable for use in demanding environments, including marine applications.

Yes, the Victron Energy Blue Smart IP65 Charger 12/5 is suitable for marine batteries, as well as those in motorcycles, classic cars, small boats, or motorhomes. Its robust design and advanced features make it perfectly suited for these applications.

This charger is compatible with lead-acid batteries (including Gel, AGM, and flooded types) and Li-ion batteries (LiFePO₄). It features a dedicated charging algorithm for each battery type to optimize their lifespan and performance.

The Blue Smart IP65s charger’s 7-step adaptive charging algorithm optimizes battery charging. It includes stages such as bulk charge, absorption, float, and storage, adjusting voltage and current to ensure a full charge, prevent sulfation, and extend battery life. It also features recovery and reconditioning functions.

Yes, this charger can recover fully discharged batteries, even at 0 volts. It initiates a low-current charge to restore sufficient voltage before switching to normal charging mode.

The Victron Energy Blue Smart IP65 charger stands out for its ultra-high efficiency, reaching up to 95%. This means it generates up to four times less heat than standard chargers. Once the battery is fully charged, its standby consumption drops to just 0.5 Watts, which is very low.

Yes, the Victron Energy Blue Smart IP65 charger is completely silent. It has no cooling fan or other moving parts, ensuring noise-free operation.

The Blue Smart IP65s charger has a power supply function, allowing it to provide a stable voltage to a device without a battery connected or as a power source to maintain a system, for example when replacing a battery.

The 'storage' mode is an essential function for extending the lifespan of batteries left connected to the charger for more than 48 hours. It reduces the charging voltage even lower than the float mode to minimize corrosion of the battery's positive plates, preventing premature aging caused by grid corrosion.

The 'reconditioning' mode is designed for lead-acid batteries that have been insufficiently charged or left discharged for an extended period, causing sulfation. It applies a low-current, higher-voltage charge to attempt to partially reverse sulfation. This mode should be used occasionally for VRLA batteries (Gel and AGM) and can be applied to flooded batteries to equalize cells and prevent acid stratification.

Yes, the Blue Smart IP65 charger includes automatic temperature compensation. It measures ambient temperature during the test phase and adjusts the charging voltage accordingly for lead-acid batteries. This ensures optimal charging performance in environments ranging from -40°C to +60°C, without requiring manual adjustments for cold or heat.

The Victron Energy Blue Smart IP65 Charger 12/5 is recommended for charging batteries with a capacity ranging from 20 Ah to 50 Ah. Using this charger for batteries within this range ensures efficient charging within reasonable timeframes.

Yes, this charger is fully compatible with Li-ion batteries (LiFePO₄). It uses a specific charging algorithm for these batteries and includes an automatic reset function for low-voltage protection, ensuring safe and efficient charging.

To connect the charger to a battery installed in a vehicle, ensure the AC cord is unplugged. Connect the RED clamp (+) of the charger to the POSITIVE (+) terminal of the battery. Connect the BLACK clamp (-) to a heavy metal part of the chassis or engine block, away from the battery, carburetor, or fuel lines. Once the clamps are connected, plug the AC cord into the wall outlet.

It is crucial to always connect and disconnect the DC clamps only after removing the AC cord from the power outlet. Never allow the clamps to touch each other. Ensure correct polarity (RED to POSITIVE, BLACK to NEGATIVE or chassis). Avoid sparks near the battery, as it produces explosive gases. Never smoke or use an open flame nearby.

Place the charger as far from the battery as the DC cables allow. Never place the charger directly above a charging battery, as battery gases could corrode and damage the charger. Ensure the area around the battery is well-ventilated and do not restrict the charger’s ventilation in any way.

The Victron Energy Blue Smart IP65 charger integrates Bluetooth Smart, allowing you to configure it, monitor it, and update its firmware via the VictronConnect app. Download the app on your smartphone or tablet (iOS or Android) to display charge status, voltage, current, and control the charger's functions.

The Victron Energy Blue Smart IP65 charger is covered by a 5-year warranty. This warranty reflects Victron Energy's confidence in the quality and durability of its products.