Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 22%

Victron Energy

SCC110020160R

Regulator solar inteligent Smart Solar MPPT 100/20 12/24/48V

Le régulateur solaire Victron Energy SmartSolar MPPT 100/20 (SCC110020160R) optimise la production d'énergie solaire avec une efficacité de 98%.

Il assure une charge adaptative pour batteries 12/24/48V jusqu'à 20A, acceptant une tension PV maximale de 100V, et intègre le Bluetooth pour une surveillance via VictronConnect.

L'algorithme BatteryLife prolonge la durée de vie de la batterie en prévenant la décharge excessive. Inclus : le régulateur et le manuel d'utilisation.

Prix publicBénéficier du tarif pro

480,96 RON

480,96 RON ~~622,84 RON~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Destinația produsului	Régulation et optimisation de la charge de batteries via panneaux solaires
Tip regulator încărcare solar	MPPT (Maximum Power Point Tracking)
Curent de încărcare maxim (A)	20
Tensiune nominală	12/24/48
Putere maximă MPPT	290 (12V) / 580 (24V) / 1160 (48V)
Gamă tensiune intrare panou solar	Jusqu'à 100
Tensiune solară maximă absolută	100
Tensiune pornire PV	Vbat + 5
Randament maxim	98
Chimii baterii suportate	Lithium,AGM,Gel,Plomb-acide
Număr intrări panouri solare	1.0
Ieșire consumator suportată	Oui
Număr etape de încărcare	3.0
Compensare temperatură	Oui
Încărcare de egalizare suportată	Oui
Rețea cablată	VE.Direct
Compatibil Bluetooth	Oui
Compatibilitate aplicație mobilă	Oui
Metoda de răcire	Passif (par convection naturelle)
Funcții de protecție	Court-circuit en sortie,Surchauffe,Protection contre la décharge excessive de la batterie,Inversion de polarité PV,Court-circuit PV,Courant inverse PV,Inversion de polarité batterie
Tip ecran	Aucun (via application mobile ou écran externe optionnel)
Nume software configurare	VictronConnect
Suport actualizare firmware	Oui
Tip de montaj	Mural
Indice IP	IP43 (composants électroniques), IP22 (zone de connexion)
Interval de temperatură de funcționare	-30 à +60
Material carcasă	Métal (Aluminium)
Greutate	0.65
Dimensiuni (L x H x P)	131 x 100 x 60
Battery Recharge Frequency	Hebdomadaire
Certificări	EN/IEC 62109-1, UL 1741, CSA C22.2
Charge Algorithm Programmable	Oui
Data Storage Days	46
Data Stored Parameters	Tension batterie, Courant batterie, Température batterie, Courant sortie charge, Tension PV, Courant PV
Max Continuous Load Current A Detail	20 (12V), 20 (24V), 1 (48V)
Câștig de eficiență MPPT	30
Mppt Technology Detail	Ultra-rapide
Self Consumption Load Off Ma	10 (12V), 8 (24V), 7 (48V)
Self Consumption Load On Ma	19 (12V), 16 (24V), 19 (48V)

Accessoires

Cablu VE.Direct 10m

99,68 RON

99,68 RON ~~136,25 RON~~

Cumpără

Cablu VE.Direct-USB

149,76 RON

149,76 RON ~~194,64 RON~~

Cumpără

Conector cu inel M6 (cu siguranță)

51,90 RON

Cumpără

Skysat Connecteur à œillet M8 (avec fusible)

Conector cu ochi M8 (cu siguranță fuzibilă)

51,90 RON

Cumpără

VICTRON ENERGY Lynx distributeur 1000A, M10

Lynx distribuitor 1000A, M10

1.059,67 RON

1.059,67 RON ~~1.394,89 RON~~

Cumpără

VICTRON ENERGY Barre 6 portes fusibles MEGA modulaire 1500A

Bară 6 porturi siguranțe MEGA modulară 1500A

236,67 RON

236,67 RON ~~311,42 RON~~

Cumpără

Description détaillée

Proiectat pentru a optimiza colectarea energiei solare, regulatorul Victron Energy SmartSolar MPPT 100/20 (SCC110020160R) este o soluție de încărcare versatilă pentru sistemele de 12V, 24V și 48V. Gestionează un curent de încărcare nominal de 20A și acceptă o tensiune în circuit deschis a panourilor fotovoltaice (PV) de până la 100V, cu o putere PV nominală de 290W în 12V, 580W în 24V și 1160W în 48V.

Tehnologie MPPT avansată și conectivitate inteligentă

Acest regulator integrează o tehnologie de urmărire a punctului de putere maximă (MPPT) ultra-rapidă, capabilă să îmbunătățească colectarea energiei cu până la 30% față de controlerele PWM și cu 10% față de MPPT-urile mai lente, în special în condiții de cer noros unde intensitatea luminoasă variază constant. Bluetooth-ul Smart integrat permite configurarea, monitorizarea și actualizările fără fir prin aplicația VictronConnect, eliminând necesitatea unui adaptor extern. Pentru integrare prin cablu, portul VE.Direct facilitează conectarea la un Color Control GX sau alte produse GX, precum și la un PC.

Gestionarea bateriei și funcții de protecție

SmartSolar MPPT 100/20 dispune de o ieșire de încărcare inteligentă care previne descărcarea excesivă a bateriei. Algoritmul BatteryLife ajustează nivelul de deconectare a sarcinii pentru a asigura o încărcare aproape completă a bateriei cel puțin o dată pe săptămână, prelungind astfel durata de viață a acesteia. Controlerul poate reîncărca baterii complet descărcate, chiar și la 0 volți, cu condiția ca celulele să nu fie deteriorate. Oferă, de asemenea, un algoritm de încărcare a bateriei programabil, compatibil cu bateriile litiu, AGM, gel și plumb-acid, cu compensare internă a temperaturii. Senzori externi de tensiune și temperatură ai bateriei pot fi conectați prin Bluetooth (Smart Battery Sense sau BMV-712 Smart) pentru o precizie sporită. Regulatorul este protejat împotriva scurtcircuitelor la ieșire, supraîncălzirii și inversării polarității bateriei (prin siguranță fuzibilă). Cu un randament maxim de 98% și o gamă de temperatură de funcționare de la -30 la +60°C (ieșire nominală completă până la 40°C), acest model se poziționează ca o soluție robustă și performantă în gama SmartSolar de la Victron Energy, oferind capacități superioare modelelor 75/10 sau 75/15, în special compatibilitatea sa cu 48V și curentul de încărcare de 20A.

Avis de l'expert

Pol CONIN

Responsabil digital

« Analysis of the SmartSolar MPPT 100/20 regulator for marine systems »

The Victron Energy SmartSolar MPPT 100/20 solar charge controller is a technically relevant solution for mid-sized marine installations as well as standalone land-based systems. Its ability to operate with 12V, 24V, or 48V battery banks, combined with a 20A charge current and a maximum PV voltage of 100V, offers valuable flexibility for varied panel configurations. This model is particularly well-suited to pleasure craft or small commercial vessels requiring optimized charging without the bulk of a heavier system.

The practical value of the SmartSolar MPPT 100/20 lies in its embedded intelligence. Integrated Bluetooth, paired with the VictronConnect app, significantly simplifies commissioning, real-time monitoring, and adjustment of charge parameters. This wireless interface is a major asset for installers and end users, eliminating the need for additional screens or dongles for basic diagnostics. The "BatteryLife" algorithm is a key differentiating feature, ensuring extended battery life by preventing chronic deep-discharge cycles—a common issue in solar systems where energy input is intermittent. This proactive discharge management is a significant advantage over more basic MPPT controllers.

From an installation perspective, its compact dimensions (100 x 131 x 60 mm) and IP43 protection rating for electronic components (IP22 for connections) make it suitable for integration into moisture-protected technical compartments. The 6 mm² terminals are appropriate for the 20A nominal current. While it can recharge deeply discharged batteries (down to 0V), it is critical to ensure batteries are not irreversibly damaged. For more complex systems requiring deep integration with a BMS or other Victron equipment via VE.Bus, pairing it with a GX device is recommended. This controller is less suited to large-scale solar installations requiring charge currents above 20A, for which other SmartSolar models (e.g., 100/30, 100/50) would be more appropriate.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Regulator solar inteligent Smart Solar MPPT 100/20 12/24/48V

480,96 RON

480,96 RON ~~622,84 RON~~

Complétez votre installation avec des

Équipements complémentaires

Victron Energy

Centrul de comunicații Cerbo GX

Ref : BPP900450100

1.492,21 RON

1.492,21 RON ~~2.004,76 RON~~

Victron Energy

Ekrano GX

Ref : BPP900480100

2.982,23 RON

2.982,23 RON ~~3.905,70 RON~~

Victron Energy

Controler baterie SmartShunt IP65 500A

Ref : SHU050150050

600,16 RON

600,16 RON ~~694,20 RON~~

Victron Energy

Panou fotovoltaic monocristalin Bluesolar 12V 115Wc serie 4a 1015 x 668 x 30mm

Ref : SPM041151200

502,25 RON

502,25 RON ~~674,74 RON~~

Victron Energy

Panouri solare monocristaline 360W 24V seria 4b

Ref : SPM043602402

1.232,70 RON

1.232,70 RON ~~1.375,43 RON~~

Victron Energy

Baterie litiu LFP Smart 25,6V/100Ah-a (2,56 kWh) NG

Ref : BAT524110620

6.617,64 RON

6.617,64 RON ~~9.154,40 RON~~

Victron Energy

Baterie 12V descărcare lentă AGM 110Ah

Ref : BAT412101084

1.454,41 RON

1.454,41 RON ~~1.946,36 RON~~

Victron Energy

Încărcător izolat Orion Tr Smart 12/12-18A (220W) DC-DC

Ref : ORI121222120

829,75 RON

829,75 RON ~~1.109,43 RON~~

Victron Energy

Încărcător Orion XS 12/12V-50A DC-DC neizolat

Ref : ORI121217040

1.935,53 RON

Victron Energy

Echilibrator de baterie

Ref : BBA000100100

268,52 RON

268,52 RON ~~337,37 RON~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What battery voltages are supported by this solar charge controller?

The SmartSolar MPPT 100/20 charge controller is compatible with 12V, 24V, and 48V battery systems. It automatically detects system voltage.

What is the maximum power of solar panels I can connect to this charge controller?

The maximum nominal power of the photovoltaic (PV) panels that the controller can handle is 290W for a 12V system, 580W for a 24V system, and 1160W for a 48V system. It is important to note that if a higher PV power is connected, the controller will limit the input power.

Is the Victron SmartSolar MPPT 100/20 charge controller equipped with Bluetooth?

Yes, the regulator integrates Bluetooth Smart technology. This allows configuration, monitoring, and wireless updates via the VictronConnect app on your smartphone or tablet, without requiring an external dongle.

How does the ultra-fast MPPT technology of this charge controller work?

Ultra-fast MPPT technology continuously optimizes solar energy harvesting by tracking the maximum power point of the panels. It can improve energy output by up to 30% compared to PWM controllers and 10% compared to slower MPPT controllers, especially in cloudy conditions where light intensity fluctuates constantly.

Can I connect external battery voltage or temperature sensors?

Yes, it is possible to add external battery voltage and temperature sensors via Bluetooth. You can use a Smart Battery Sense or a BMV-712 Smart Battery Monitor to send this data to the charge controller.

What is the maximum open-circuit voltage of solar panels that the controller can accept?

The SmartSolar MPPT 100/20 charge controller can accept an open-circuit voltage from photovoltaic (PV) panels up to 100V.

Can this controller charge a fully discharged battery?

Yes, the regulator is equipped with a fully discharged battery recovery function. It can initiate charging even if the battery has been discharged to zero volts, provided the cells are not damaged. It can also reconnect to a fully discharged Li-ion battery with an integrated disconnection function.

Which types of batteries are compatible with the programmable charge algorithm?

The programmable battery charging algorithm is compatible with multiple battery types, including lithium, AGM, gel, and lead-acid batteries. It also includes internal temperature compensation.

What is the function of the load output and its maximum current on this regulator?

The smart load output prevents excessive battery discharge by disconnecting loads when the battery reaches a predefined voltage. For 48V systems, this function interfaces with a relay. The load output is protected against short circuits and can handle a maximum continuous current of 20A for 12V and 24V systems, and 1A for 48V systems.

What is the BatteryLife algorithm and how does it protect my battery?

The BatteryLife algorithm is an intelligent battery management system that prevents excessive discharge. If the charge controller cannot fully recharge the battery within a day, BatteryLife gradually adjusts the load disconnection level each day (disconnects the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly 100%. Then, the disconnection level is modulated to ensure a near-full recharge approximately once a week, thereby extending battery lifespan.

What is the nominal charging current of this charge controller?

The nominal charge current of the SmartSolar MPPT 100/20 charge controller is 20A.

Does the regulator have protection against overheating or short circuits?

Yes, the regulator is equipped with protections against output short-circuits and overheating to ensure the safety of your system.

What are the requirements for power cables to be connected to the charge controller?

The power terminals of the regulator are designed for 6 mm² (AWG10) cables to ensure a secure and efficient electrical connection.

What is the operating temperature range of this regulator?

The controller can operate within a temperature range from -30 to +60 °C. It is important to note that it delivers its full rated power up to 40 °C.

How can I monitor the performance of my solar system with this charge controller?

You can monitor your system's performance via the VictronConnect app using the built-in Bluetooth. The controller also stores historical data on battery voltage, current, and temperature, charge output current, and PV voltage and current for 46 days.

Is it possible to connect the controller to a Victron Energy GX monitoring system?

Yes, the controller is equipped with a VE.Direct port that allows a wired connection to a Color Control GX or other GX products, as well as to a PC or other devices for advanced integration and monitoring.

What is the maximum short-circuit current of the PV panels that the charge controller can support?

The maximum short-circuit current of the PV panels that the controller can support is 20A. It is crucial not to connect a PV array with a higher short-circuit current, as this could damage the controller.

How does the regulator manage temperature compensation for battery charging?

The controller integrates an internal temperature sensor that automatically compensates the absorption and floating voltage based on ambient temperature, with a compensation of -16 mV / °C or -32 mV / °C depending on the system. This ensures optimal charging and extends battery life.