B&G WS320 Interface sans fil uniquement - photo 2

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 27%

B&G

000-14388-001

WS320 Vmesniški vmesnik – brezžičen le

The WS320 wireless interface is the Bluetooth receiver dedicated to the B&G WS320 wireless wind transducer/vane anemometer. It provides the connection between the masthead sensor and the onboard NMEA 2000 network, with a data refresh rate of 5 Hz. This product is sold separately as a spare part and does not include the wind transducer/vane anemometer.

Includes: WS320 wireless interface only.

Public priceGet pro pricing

166,30€

166,30€ ~~229,32€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Tip izdelka	Wireless interface
Usklajenost z normami	IEC/EN 60945
Bluetooth različica	4.0
Varnostna razdalja od kompasa	300
Compatible Sensors	B&G WS320
Vrsta konektorja	Micro-C
Data Update Frequency	5
Humidity Test Conditions	66°F, 95% RH, 18h
Included Connection Cable	Micro-C 1.8 m split cable
IP razred	IPX7
Možnosti montaže	Bulkhead, Mast
Network Load	2
Območje delovne napetosti	9-16
Pairing Method	Via a B&G multifunction display compatible
Poraba električne energije (mA)	100
Tipična poraba električne energije	1.2
Premer izdelka	90
Višina izdelka	35
Teža	0.1
Brezžična povezanost	Bluetooth
Maks. brezžični doseg	30

Detailed description

B&G-jev brezžični vmesnik WS320 je prejemnik Bluetooth, ki je namenjen izključno brezžičnemu vetromerju WS320. Gre za bistveno komponento, ki povezuje senzor na vrhu jambora z vašo NMEA 2000 omrežjem na čolnu. Pretvarja brezžične signale v podatke, ki jih lahko uporabijo vaši multifunkcijski zasloni in avtopiloti B&G. Ta izdelek, ki ga označuje številka sklada 000-14388-001, vključuje le vmesnik in ne vsebuje vetromerja.

Povezljivost in zmogljivost

Z uporabo tehnologije Bluetooth 4.0 zagotavlja ta vmesnik stabilno in zanesljivo povezavo z vetromerjem WS320 do 30 metrov. Prejema podatke o hitrosti in smeri vetra ter jih pošilja v omrežje NMEA 2000 s frekvenco osveževanja 5 Hz (5-krat na sekundo). Ta visoka frekvenca zagotavlja enako odzivnost in tekočnost podatkov kot tradicionalni žični sistemi blagovne znamke, kot je WS310, kar je ključno za delovanje avtopilota in natančnost navigacijskih instrumentov pri jadranju.

Namestitev in napajanje

Vključevanje vmesnika WS320 je čim bolj poenostavljeno. Napajanje (9–16 V DC) in povezava podatkov potekata neposredno preko omrežja NMEA 2000 z uporabo standardnega Micro-C povezovalca. Poraba električne energije je nizka: 1,2 W (manj kot 100 mA pri 12 V DC) za 2 LEN omrežni obremenitev. Kompaktna in lahka ohišje (0,1 kg) je certificirana kot vodotesna IPX7, kar omogoča namestitev v najbolj zahtevnih morskih okoljih, zaščitenih pred vremenskimi vplivi. Konfiguracija in sparivanje s senzorjem vetra potekata preko kompatibilnega multifunkcijskega zaslona B&G.

Pozicija izdelka: le vmesnik

Ta izdelek je brezžični vmesnik WS320, ki se prodaja samostojno. Namenjen je predvsem zamenjavi poškodovane ali izgubljene enote ali pa za namenske montaže. Da sestavite popoln in funkcionalen sistem za merjenje vetra, je ta vmesnik nujno potrebno spariti z brezžičnim vetromerjem WS320, ki se prodaja ločeno ali pa v kompletu WS320. Celoten sistem WS320 predstavlja moderno alternativno rešitev žičnim senzorjem, saj odpravi težavo s kablovodstvom v jamborju brez kompromisov glede natančnosti.

Documentation

Type	Nom
	EN - Guide de Configuration des Capteurs - WS320 Interface sans fil uniquement - Ref c0c5fb02.pdf
	EN - Gabarit de montage - WS320 Interface sans fil uniquement
	EN - Guide d'installation - WS320 Interface sans fil uniquement
	EN - Déclaration de Conformité CE - WS320 Interface sans fil uniquement

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Pomembna povezava med brezžičnim sistemom in vašo omrežjem NMEA 2000 »

Vmesnik WS320 je ključna komponenta, ki povezuje brezžično tehnologijo vetrnega senzorja B&G z robustnostjo žične omrežne arhitekture NMEA 2000. Njegova vloga je prejemanje podatkov o vetru prek energetsko varčne Bluetooth povezave in njihovo pretvorbo v standardne NMEA 2000 sporočila (PGNs), hkrati pa napajati senzor. Ta modul odpravi potrebo po kablu na jamboru, pogostem vzroku za okvare, ne da bi pri tem žrtvoval zanesljivost integracije podatkov. Standardni Micro-C vtič in vodoodporna ohišje IPX7 zagotavljajo enostavno in trajno namestitev, ki se popolnoma integrira v omrežno arhitekturo vsakega jadrnice opremljene z B&G.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

WS320 Vmesniški vmesnik – brezžičen le

166,30€

166,30€ ~~229,32€~~

Frequently asked questions

Need help? Contact us

What exactly is the WS320 wireless interface?

The WS320 wireless interface is a Bluetooth receiver. Its function is to receive data from the B&G WS320 wireless wind transducer / vane anemometer (sold separately) and transmit it to your boat's NMEA 2000 network for display on your screens.

Is the wind transducer / vane anemometer that goes at the masthead included with this product?

No, this product (SKU 000-14388-001) includes only the wireless interface (the receiver). The WS320 wind transducer / vane anemometer must be purchased separately or as part of a complete pack.

Which wind transducer / vane anemometer is this interface compatible with?

This interface is designed to work exclusively with the B&G WS320 wireless wind transducer / vane anemometer. It is not compatible with other models, including wired models such as the WS310.

How is the WS320 interface powered?

The interface is powered directly from your boat's NMEA 2000 network. It operates on a 9 to 16 V DC voltage supplied by the network bus, with no separate power cable required.

What is the wireless range between the interface and the sensor?

The Bluetooth connection between the interface and the WS320 wind transducer/vane anemometer has a range of up to 30 meters (98 feet), which is sufficient for most sailboats.

What type of network does this interface connect to?

The WS320 interface connects to your boat's NMEA 2000 network via a standard Micro-C connector, ensuring broad compatibility with modern navigation equipment.

How often are wind data updated?

Wind data (apparent speed and angle) are transmitted to the NMEA 2000 network at a refresh rate of 5 Hz, i.e. five times per second, for maximum responsiveness.

What is the power consumption of this interface?

The WS320 interface has very low power consumption, at 1.2 W, which corresponds to less than 100 mA at 12 V DC.

What is the network load index (LEN) of this product?

The WS320 interface has a network load index (LEN - Load Equivalency Number) of 2. This value must be considered when calculating the total load of your NMEA 2000 network.

What is the waterproof rating of the WS320 interface?

The interface has an IPX7 waterproof rating, meaning it is protected against temporary immersion in water (up to 1 meter depth for 30 minutes).

What type of connector is used for network connection?

The interface uses a standard Micro-C connector to plug directly into a T-connector on your NMEA 2000 backbone.

Why buy only the interface without the wind sensor?

This product is primarily intended for replacing an existing interface that may be damaged or lost, or for custom installations where components are purchased separately.

Is this interface compatible with an old SimNet network?

The interface uses a NMEA 2000 connection (Micro-C). To connect it to an old SimNet network, a SimNet to Micro-C adapter cable (sold separately) is required.

Where is it recommended to install the interface housing?

The interface should be installed in a dry, protected location while ensuring it remains within the 30-meter range of the masthead sensor. The location must allow easy connection to the NMEA 2000 backbone.