Odklopnik HD 50A

The BEP HD 50A circuit breaker (reference 185050F/DSP) is a robust thermal circuit breaker designed specifically for protecting electrical circuits in marine environments. It features a 50 ampere capacity and a manual reset mechanism for surface mounting.

Its primary function is to protect electrical equipment and wiring from overloads and short circuits. In the event of excessive current, it automatically cuts off the circuit to prevent material damage and fire hazards, thereby ensuring safety on board.

The designation "HD" stands for "Heavy Duty", indicating a reinforced design. This means the circuit breaker is built for increased durability, capable of withstanding demanding marine conditions such as vibrations, corrosion, and temperature variations.

This circuit breaker has a rated current of 50 amperes. It is designed to protect circuits that do not exceed this value under normal operation.

The manual reset mechanism means that after a trip due to an overload, the circuit breaker does not reset automatically. The operator must identify and resolve the cause of the overload, then manually press the reset button to restore power to the circuit.

Yes, this circuit breaker is explicitly designed for demanding marine environments. Its "Heavy Duty" design makes it resistant to typical marine conditions such as humidity, corrosion, and vibrations.

It is suitable for a wide range of onboard applications, including charging systems (e.g., alternators, battery chargers) and auxiliary power circuits, protecting various electrical equipment.

This circuit breaker is manufactured by BEP, known for its power management and distribution solutions in the marine sector.

Yes, its "Heavy Duty" design includes enhanced corrosion resistance, which is critical for durability and reliability in the saline and humid environment typical of marine applications.

Yes, its reinforced "Heavy Duty" design makes it particularly resistant to vibrations, a crucial feature for equipment installed aboard ships and other vessels.

Yes, thanks to its manual reset mechanism, it can also be used as a circuit disconnect switch, allowing manual control of a specific circuit's power supply in addition to its protection function.

This circuit breaker is designed for surface-mount installation. This means it is fixed directly onto a flat surface, such as a panel or bulkhead, without requiring complex cutting for flush mounting.

Installing an electrical circuit breaker must always be done with caution. While surface mounting simplifies the mechanical aspect, it is recommended to follow the manufacturer's instructions and ensure the electrical installation complies with current marine safety standards. If you are unsure, professional assistance is advised.

When installing in a marine environment, it is crucial to use connectors and cables suitable for this environment (corrosion- and moisture-resistant). Ensure the circuit breaker is mounted in a location protected from direct water spray if possible, even if it is designed to withstand the marine environment.

Yes, it is mandatory to always disconnect the main power supply (for example, the batteries) before working on your boat's electrical system to avoid any risk of electric shock or accidental short circuit.

Yes, this 50A circuit breaker is a reusable alternative to a 50A fuse. The advantage is that in case of overload, you only need to reset it manually once the issue is resolved, without having to replace a blown fuse.

This circuit breaker is compatible with marine DC electrical systems requiring 50-amp protection. It is designed to operate in typical boat and other marine vehicle environments.

Yes, the BEP HD 50A circuit breaker is designed to be a reliable product. The "Heavy Duty" (HD) designation and its construction for demanding marine environments attest to its robustness and durability, aimed at ensuring consistent and reliable electrical protection over the long term.