Digitalni enosmerni voltmeter - 0 do 60 V DC

The BLUE SEA 8235-BSS DC digital voltmeter is designed specifically for precise and continuous monitoring of voltage in marine electrical systems. It focuses on reliable voltage measurement without additional functions.

This voltmeter offers a measurement range from 0 to 60 V DC.

The measurement accuracy of the 8235-BSS voltmeter is ± 0.5 % (± 1 digit).

The voltage display resolution is 0.01 V DC, enabling detailed reading of variations.

The display uses characters measuring 9/16 inch (approximately 14.3 mm) in size.

No, the 8235-BSS model is a dedicated voltmeter. It does not include ammeter functions or programmable alarms, unlike other multifunction models from the brand.

Yes, it is useful for monitoring battery charge state. It is important to note that voltage is only a reliable indicator of charge state when open-circuit voltage is measured after stabilization (when the battery is neither charging nor discharging).

The maximum power consumption of the BLUE SEA 8235-BSS digital voltmeter is 1.00 W.

Yes, the display has adjustable brightness, allowing it to adapt to various lighting conditions for better visibility.

Yes, its PCBs are conformal-coated for enhanced corrosion resistance, which is critical in a marine environment.

The voltmeter must be installed in a visible position, with easy access to the buttons. The location should be dry and protected, and it is recommended not to place it in direct sunlight for optimal display visibility.

While its front panel is splash-proof and its PCB is conformal-coated against corrosion, it is not intended for outdoor installation without additional protection or in very wet environments.

Installation requires basic electrical skills, particularly for high-capacity wiring and installing appropriate fuses. If you lack these skills, it is recommended to hire a qualified electrician.

Installation requires high-capacity wiring, as well as direct connections to the battery's positive terminal. These connections must be made carefully.

Yes, connections must be made carefully and protected with appropriate fuses, as shown in the wiring diagram provided with the product, for safety reasons.

The dimensions of the 8235-BSS voltmeter are as follows:

Height: 61.75 mm (2.431 inches)Width: 73.56 mm (2.896 inches)Depth: 86.36 mm (3.400 inches)

The voltmeter is powered by a DC voltage ranging from 8 to 50 V DC.

Yes, with a power supply range of 8 to 50 V DC, the voltmeter is compatible with 12 V and 24 V marine electrical systems, as well as other voltages within this range.

Yes, this voltmeter can be used with gel batteries. It is important to note that gel batteries may require up to 48 hours for their open-circuit voltage to stabilize fully, which is crucial for reliable state-of-charge readings.

It is specifically designed for marine electrical systems operating on direct current (DC) and is compatible with voltages ranging from 0 to 60 V DC for measurement, and 8 to 50 V DC for its power supply.