e-Series Selector Battery Switch with AFD - e-Series Selector Battery Switch with AFD

e-Series Selector Battery Switch with AFD - Mounting Diagram

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 13%

Blue Sea Systems

9002E-BSS

Izklop-baterije selektorja e-Series z AFD

Conçu pour les moteurs in-bord, le sélecteur de batterie Blue Sea e-Series 9002E-BSS avec AFD gère deux parcs batteries avec une intensité continue de 350A. Sa fonction de déconnexion du champ d'alternateur protège les diodes de l'alternateur, et sa certification IP66 assure une durabilité marine. Le sélecteur de batterie est livré seul.

Public priceGet pro pricing

68,04€

68,04€ ~~78,30€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Namembnost izdelka	Gestion de puissance des systèmes électriques marins, sélection et combinaison de parcs de batteries, démarrage d'urgence.
Tip stikala	Sélecteur 4 positions
Nihajoči tok (A)	350
Prekinoma tok (A)	600
Vžigalna tok (A)	1200
Maksimalna napetost enosmernega toka	32
Število polov	1
Položaji	4 (OFF, 1, 2, 1+2)
AFD-zaščita	Oui
Tip priključka	Goujon, cuivre étamé
Velikost priključka	3/8"-16 (M10)
Vrsta ožičenjske povezave	Cosses à œillet sous écrou
Vrsta upravljanja	Manuel rotatif
Tip montaže	Montage en surface ou sur panneau
IP razred	IP66
Območje delovne napetosti	0-32V DC
Premer izreznega odprtja za panel	92.08
Teža	0.52
Dimenzije (D x V x G)	98 x 98 x 79 mm
Garancija	99.0
Barva aktuatorja	Noir
Actuator Feedback Type	Tactile
Stil aktuatorja	Bouton rotatif
Jakost toka	350
Cable Entry Count	5
Organ za certifikacijo	IMCI
Tip združljivega motorja	Moteurs in-bord essence et diesel
Flange Nut Material	Acier inoxydable
Vrsta namestitve	Montage en surface / sur panneau
LED indikator	false
Make Before Break Feature	Oui
Mounting Hole Pattern Compatibility	PERKO, Guest
Operation Restriction Engine Running	Oui
Podtip izdelka	Commutateur de batterie
Funkcija stikala	Sélectionne et combine les parcs de batteries
Terminal Stud Design Type	Monobloc
Warranty Period Text	À vie

Detailed description

Namenjen je upravljanju moči električnih sistemov na morju. Selektor baterij Blue Sea e-Series 9002E-BSS z vgrajenim AFD predstavlja rešitev za aplikacije, ki zahtevajo zanesljiv napajalni sistem in napredno zaščito generatorja. Ta stikalo omogoča izbiranje med baterijskim parkom 1 ali 2, ali njihovo združevanje (1+2) za polnjenje ali nujni zagon.

Napredna zaščita z vgrajenim AFD

Vgrajen sistem za odklop polja generatorja (AFD) v selektorju baterij Blue Sea e-Series 9002E-BSS je ključna varnostna značilnost. Ščiti diode generatorja pred morebitnimi poškodbami v primeru preklopa stikala v položaj OFF, ko je motor v teku. Z prekinitvijo kabla polja generatorja AFD zmanjša njegov izhod na nič, s čimer prepreči uničujoče napetostne sunke. Ta funkcija je ključna za dolgoživost sistema polnjenja.

Zmogljivost in morska konstrukcija

Model 9002E-BSS je dimenzioniran za notranje motorje na bencin in dizel, z nominalno kontinuirano jakostjo 350A, intermitentno jakostjo 600A v 5 minutah in jakostjo zagonov 1200A v 30 sekundah, pri maksimalni napetosti 32V DC. Stezni vijaki terminalov 3/8"-16 (M10) iz kositranega bakra, dolžine 7/8" (22,22 mm), zagotavljajo maksimalno prevodnost in visoko odpornost proti koroziji, hkrati pa omogočajo povezavo več kabelskih končnic 4/0 AWG (95 mm²). Priporočeni navor za stezanje terminalov je 15,82 N·m (140 in-lb). Funkcija "make-before-break" zagotavlja preklop med baterijskimi bankami brez prekinitve napajanja, kar je ključno za kritične sisteme.

Varnost, skladnost in namestitev

To stikalo je skladno z zahtevami za zaščito pred vžigom (UL 1500, SAE J1171, ISO 8846), zaradi česar je varno za namestitev na čolnih na bencin. Njegova robustna konstrukcija z IP66 razredom varnosti ga ščiti pred prahom in močnimi curki vode, kar zagotavlja trajnost v morskem okolju. Kučišče omogoča površinsko ali zadnje namestitev na panel in je združljivo z večino modelov vrtanj za stikala baterij PERKO in Guest. Blue Sea e-Series 9002E-BSS se odlikuje po vgrajenem AFD in IP66 zaščiti, ključnih značilnostih za varnost in trajnost v morskem okolju. Uporablja terminalne vijake iz kositranega bakra za superiorno prevodnost in odpornost proti koroziji ter sprejema kable velikosti 4/0 AWG, kar zagotavlja optimalno upravljanje moči za zahtevne aplikacije. Njegova skladnost z normami ABYC E-11 in UL 1107 potrjuje zanesljivost in zmogljivost v morskem okolju.

Documentation

Type	Nom
	EN - Instructions - e-Series Selector Battery Switch with AFD
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - e-Series Selector Battery Switch with AFD
	EN - E Series Battery Switches - e-Series Selector Battery Switch with AFD
	EN - Manual - e-Series Selector Battery Switch with AFD
	EN - Certificate - e-Series Selector Battery Switch with AFD
	EN - Certificate - e-Series Selector Battery Switch with AFD
	EN - Certificate - e-Series Selector Battery Switch with AFD

Expert review

Pol CONIN

Odgovorni digitalni delavec

« Technical analysis of the Blue Sea e-Series battery selector with AFD »

The Blue Sea e-Series battery selector with AFD, part number 9002E-BSS, is a critical component for electrical management on boats equipped with inboard engines, whether gasoline or diesel. Its primary function, alternator field disconnection (AFD), is a key operational feature. It eliminates the risk of damaging alternator diodes, a common and costly scenario if a standard switch is toggled to OFF while the engine is running. This built-in protection is a major advantage over switches lacking this feature, where a handling error can lead to expensive repairs.

Installation is straightforward thanks to its versatile design, allowing surface or rear-panel mounting. It accommodates heavy-gauge battery cables up to 4/0 AWG, and its tinned copper studs ensure optimal conductivity and long-term corrosion resistance. This robustness is reinforced by its IP66 rating, making it suitable for marine environments exposed to spray and water spray. It is particularly relevant for vessels where power supply reliability is critical, such as cruising sailboats or mid-sized powerboats requiring precise management of two battery banks.

While designed for efficient management of two battery banks and alternator protection, it is essential to follow installation procedures, including terminal torque and correct AFD wiring. It does not replace an advanced battery manager for complex systems with multiple charging sources, but excels in its role as a robust and secure selector for classic start and service configurations.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Izklop-baterije selektorja e-Series z AFD

68,04€

68,04€ ~~78,30€~~

Frequently asked questions

Need help? Contact us

What are the main functions of this Blue Sea e-Series battery selector?

This battery selector allows you to manage two battery banks. You can select bank 1, bank 2, or combine both (1+2) for charging or emergency starting.

What is the built-in AFD function and what is it used for?

AFD stands for "Alternator Field Disconnect." It is an essential safety function that protects the alternator's diodes from damage. If the switch is toggled to OFF while the engine is running, the AFD cuts the alternator's field wire, reducing its output to zero and preventing destructive voltage spikes.

What is the maximum continuous direct current rating this selector can handle?

The Blue Sea e-Series 9002E-BSS battery selector has a continuous rated current of 350 amperes.

What is the maximum operating voltage of this switch?

The maximum operating voltage of this switch is 32V DC.

Is this product ignition-protected?

Yes, this battery selector switch is marked "Ignition Protected". It meets the external ignition protection requirements of UL 1500 and SAE J1171.

Is the switch housing waterproof?

Yes, the switch housing is rated IP66, meaning it is protected against powerful water jets.

What are the different switch positions available on this selector?

This selector has four positions:

OFF: Off.1: Selects battery bank 1.2: Selects battery bank 2.1+2: Combines battery banks 1 and 2.

What are the dimensions of the terminal studs and what material are they made of?

The terminal studs are made of tinned copper, measure 3/8"-16 (M10) and have a length of 7/8" (22.22 mm). They are designed in one piece for maximum conductivity, corrosion resistance and to reduce the risk of overheating.

What is the intermittent rated current of this switch?

The intermittent rated current of this switch is 600 amperes for 5 minutes (per UL 1107).

What is the cranking rating of this selector?

The cranking rating of this selector is 1200 amperes for 30 seconds.

Where should I mount the battery selector?

The battery selector must be mounted in an easily accessible location close to the batteries. Its design allows for surface mounting or mounting on the rear panel.

What type of battery cable is recommended for this switch?

To meet current specifications, use 4/0 AWG (95mm²) battery cables per terminal.

What is the recommended torque for battery cable terminals?

The recommended torque for battery cable terminals is 15.82 N·m (140 in-lb).

How to connect the AFD (Alternator Field Disconnect) device?

To connect the AFD, disconnect the field wire running from the alternator to the voltage regulator. Connect one end to terminal F1 and the other end to terminal F2 on the selector.

Are there any precautions to take before installation?

Yes, it is mandatory to disconnect the battery’s positive terminal before any installation. It is also advisable to consult a marine electrician for proper wiring and installation information compliant with NFPA 302 and/or ABYC E11 standards.

Can I switch the switch to the OFF position while the engine is running?

No, never switch the switch to the OFF position while the engine is running. It is recommended to turn off all electrical devices before setting the battery switch to OFF.

For which types of engines is this battery selector suitable?

This battery selector is designed for high-power applications and is suitable for inboard gasoline and diesel engines.

Is this selector compliant with maritime standards?

Yes, it is compliant with all American Boat and Yacht Council (ABYC) requirements for battery switches. It is also UL listed (UL 1107 for power switches) and meets UL 1500 external ignition protection and SAE J1171 requirements. It is CE certified and compliant with ISO 8846.