m-Series Automatic Charging Relay - 12/24V DC 65A - m-Series Automatic Charging Relay - 12/24V DC 65A

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 7%

Blue Sea Systems

7601-BSS

Samodejni preklopnik serije m – 12/24 V DC 65 A

Conçu pour la gestion automatique de deux parcs batterie, le relais de charge Blue Sea m-Series 7601 gère des systèmes 12/24V avec 65A en continu.

Sa fonction d'isolation au démarrage protège l'électronique embarquée des creux de tension. Ce modèle fait partie de la gamme m-Series de Blue Sea, reconnue pour sa fiabilité.

Inclus : un capot isolant et un connecteur rapide pour la mise à la terre.

Public priceGet pro pricing

96,43€

96,43€ ~~104,28€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Nazivna napetost	12/24 V
IP razred	IP67
Battery Banks	2.0
Combine Voltage	12V DC: 13.6V DC (30 sec) ou 13.0V DC (2 min); 24V DC: 27.2V DC (30 sec) ou 26.0V DC (2 min)
Nihajoči tok (A)	65.0
Zaščita pred vžigom	Oui
Ignition Protection Standards List	ISO 8846,SAE J1171
Intermittent Current 5min	115
Mounting Cutout Diameter Front Mm	67
Mounting Cutout Diameter Rear Mm	59
Tip montaže	Surface, arrière ou panneau
Open Voltage	12V DC: 12.35V DC (10 sec) ou 12.75V DC (30 sec); 24V DC: 24.7V DC (10 sec) ou 25.5V DC (30 sec)
Over Voltage Lockout Threshold 12v	16.0V DC
Product Application Scenario	marine,véhicules récréatifs,systèmes d'alimentation hors réseau
Tip releja	Relais de charge automatique (ACR)
Start Isolation	Oui
Undervoltage Lockout Threshold 12v	9.5V DC
Undervoltage Lockout Threshold 24v	19.0V DC
Undervoltage Reset Threshold 12v	10.0V DC
Undervoltage Reset Threshold 24v	20.0V DC

Detailed description

Namenjen avtomatskemu upravljanju sistemov z dvojnim baterijskim parkom, samodejni preklopnik (ACR) Blue Sea m-Series 7601 zagotavlja učinkovito porazdeljevanje moči v napajalnih sistemih 12 V DC ali 24 V DC. Ta model je idealen za motorne čolne, vozila za prosti čas in sisteme za napajanje izven omrežja, ki zahtevajo zmogljivost polnjenja do 65 A v kontinuiranem režimu in 115 A v intermitentnem režimu (5 minut).

Značilnosti in tehnične zmogljivosti

m-Series 7601 se odlikuje po sposobnosti avtomatskega združevanja baterij med polnjenjem in njihove izolacije med izpraznjevanjem ali pri ustavitvi, kar optimira razpoložljivost energije in ščiti baterijo za zagon. Z dvojnim zaznavanjem prepozna prisotnost obremenitve na enem ali drugem baterijskem paru. Vključen je funkcija izolacije ob zagonu (SI), ki ščiti občutljivo elektronsko opremo pred padci in sunki napetosti med zagonom motorja. V primerjavi z tradicionalnimi baterijskimi izolatorji z diodami, ACR-ji kot 7601 ponujajo višjo učinkovitost, saj proizvajajo manj toplote in porabljajo minimalno energijo za polnjenje.

Varnost in namestitev

Ta preklopnik je negorljiv, skladen z zahtevami za zaščito pred zunanjim vžigom po standardih ISO 8846 in SAE J1171, kar ga naredi varnega za namestitev na čolnih s pogonom na bencin. Njegova klasifikacija IP67 zagotavlja zaščito pred začasnim potopom do 1 metra globine v trajanju 30 minut. Pragovi napetosti za združevanje so 13,6 V DC (30 s) ali 13,0 V DC (2 min) za sisteme 12 V in 27,2 V DC (30 s) ali 26,0 V DC (2 min) za sisteme 24 V. Odpiranje se izvaja pri 12,75 V DC (30 s) ali 12,35 V DC (10 s) za sisteme 12 V. Opremljen je z vijačnimi stikalnimi priključki 1/4"-20 (M6) in sprejema kabli do 1/0 AWG, priporočljiva velikost pa je 6 AWG (16 mm²) za upoštevanje nominalnih tokov. Vgrajen LED indikator zagotavlja vizualne informacije o stanju ACR-ja, vključno z načini polnjenja, izolacije, podnapetosti in napake. Vključena sta odstranljiva izolacijska pokrov in hitri 1/4" x 0,032" priključek za ozemljitev, kar olajšuje namestitev in varuje priključke.

Documentation

Type	Nom
	EN - Diagnostic Flowchart - m-Series Automatic Charging Relay - 12-24V DC 65A
	EN - Dimension Drawing - m-Series Automatic Charging Relay - 12-24V DC 65A
	EN - Instructions - m-Series Automatic Charging Relay - 12-24V DC 65A
	EN - Choose The Right ACR - m-Series Automatic Charging Relay - 12-24V DC 65A
	EN - Certificate - m-Series Automatic Charging Relay - 12-24V DC 65A

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis: Blue Sea m-Series 7601 automatic charging relay »

The Blue Sea m-Series 7601 automatic charge relay (ACR) is a key component for optimizing energy management on vessels equipped with two battery banks, typically a starter battery and a house battery. Its ability to operate on 12V or 24V DC systems with a continuous current of 65A makes it a reliable solution for medium-sized alternators, commonly found on outboard motors or small inboard engines. This model is particularly relevant for recreational boaters seeking fully automated charging without manual intervention.

One of the 7601’s major advantages is its Start Isolation (SI) function. This feature effectively protects sensitive onboard electronics by temporarily isolating the house circuit from the starter circuit, preventing harmful voltage fluctuations. Installation is straightforward for a marine electrician, requiring positive connections with appropriate fuses, grounding, and the optional SI line connection. It is critical to follow the recommended cable sizes (minimum 6 AWG) and ensure installation in a protected location, although its IP67 rating provides good resistance to marine environments.

Compared to higher-capacity models in the same series (such as the 7610/7611 at 120A or the 7620/7622 at 500A), the 7601 is specifically suited for applications where alternator output does not exceed 65A, offering a balance of performance, compactness, and cost. It does not replace a battery switch for emergency starting but optimizes daily charging. Therefore, it is ideal for cruising sailboats or small motorboats where simplicity and reliability in charge management are priorities, without the constraints of a more complex or oversized system. It is important to note that this model is not designed to handle engine starting currents.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Samodejni preklopnik serije m – 12/24 V DC 65 A

96,43€

96,43€ ~~104,28€~~

Frequently asked questions

Need help? Contact us

What is an automatic charge relay (ACR) and how does the Blue Sea m-Series 7601 work?

The Blue Sea m-Series 7601 automatic charge relay (ACR) is designed to automatically manage dual-battery bank systems. It combines batteries during charging for efficient power distribution and isolates them during discharge or when stopped, protecting the starter battery and optimizing energy availability.

What are the continuous and intermittent current ratings of this charge relay?

This automatic charge relay has a continuous current rating of 65 amperes. Its intermittent current rating is 115 amperes, maintained for 5 minutes.

Is the Blue Sea m-Series 7601 relay suitable for 12V and 24V systems?

Yes, the Blue Sea m-Series 7601 automatic charge relay is designed to operate with 12V DC or 24V DC electrical systems.

What are the main functions of the m-Series 7601 charge relay?

Main functions include automatic battery combining during charging, battery isolation during discharge, dual charge detection on either battery bank, and a Start Isolation (SI) function to protect sensitive electronic equipment.

How does the m-Series 7601 charge relay ensure the safety of electronic equipment during engine start?

The relay integrates a Start Isolation (SI) function that protects sensitive electronic equipment from voltage drops and spikes that can occur during engine start.

What is the efficiency of the m-Series 7601 charge relay compared to traditional battery isolators?

Compared to traditional diode-based battery isolators, the m-Series 7601 charge relay offers superior efficiency. It generates less heat and consumes minimal charge energy.

Is this relay protected against ignition for use on gasoline-powered boats?

Yes, this relay is flame-retardant and compliant with external ignition protection requirements per ISO 8846 and SAE J1171, making it safe for installation on gasoline-powered boats.

What is the water and dust protection rating of this charge relay?

The Blue Sea m-Series 7601 automatic charge relay is rated IP67, ensuring protection against temporary immersion up to 1 meter for 30 minutes.

Where is the best place to install the m-Series 7601 charge relay?

To prevent corrosion of wires and connection terminals, it is recommended to install the relay in a dry, protected location if possible. Avoid mounting it directly above battery banks.

What is the recommended torque for the stud terminals?

The recommended torque for stud terminals is 60 in-lbs (6.8 Nm).

What type of cable and fuse should I use to connect the charge relay?

For a continuous load capacity of 65 amperes, it is recommended to use a cable with a minimum size of 6 AWG (16mm²) and a 90A-100A fuse. The maximum supported cable size is 1/0 AWG (50mm²).

How to connect the start isolation line (SI)?

The start isolation line (SI) must be connected to the terminal or wire running from the ignition switch to the starter solenoid. This connection must be live only during start-up and must be made via an inline fuse rated 1 to 10 amps.

Can the m-Series 7601 charge relay be used for engine starting currents?

No, the m-Series 7601 charge relay is not designed to handle starting currents. If batteries must be combined for emergency starting, a battery switching system with combine/parallel function must be used.

How to connect the positive terminals of battery banks to the relay?

Connect the positive terminal of one battery bank to one of the 1/4"-20 studs, and the positive terminal of the other battery bank to the other 1/4"-20 stud. Both positive connections must be made through appropriately sized circuit protection (fuse).

How to connect the ground (GND) terminal of the relay?

The quick-connect terminal marked GND (ground) must be connected to the DC system ground via an inline fuse rated at 1 ampere. This prevents fault currents in this wire.

What is the maximum alternator capacity supported by this charge relay?

This automatic charge relay can support alternators up to 65 amperes.

What are the voltage thresholds for the battery combiner relay to combine batteries in a 12V system?

In a 12V system, the relay will combine the batteries if the voltage at either terminal is above 13.6V DC for 30 seconds or above 13.0V DC for 2 minutes.

At what voltage are the batteries isolated in a 24V system?

In a 24V system, batteries are isolated when the voltage at either terminal drops below 25.5V DC for 30 seconds or below 24.7V DC for 10 seconds.

Does the relay have under-voltage or over-voltage protection?

Yes, the relay includes under-voltage protection (lockout at 9.5V DC for 12V systems and 19V DC for 24V systems) and over-voltage protection (lockout at 16.0V DC for 12V systems).