Deckhand Dimmer - 24V DC 6A - Deckhand Dimmer - 24V DC 6A

Deckhand Dimmer - 24V DC 6A - Dimensioned Drawing

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 17%

Blue Sea Systems

7504-BSS

Regulator Deckhand - 24 V DC 6 A

Q: What is the BLUE SEA Deckhand 7504-BSS dimmer?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control lighting intensity aboard boats. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Q: Which types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LED lights, incandescent bulbs, and halogen lights.

Q: What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS variable speed drive operates on a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

Q: What is the maximum output current this drive can handle?

The Deckhand 7504-BSS drive can deliver a maximum output current of 6 amperes (6 A).

Q: How does the Deckhand dimmer control the brightness of the lights?

Brightness is controlled via pulse-width modulation (PWM), ensuring smooth and progressive adjustment of light intensity.

Q: What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

Q: How to use the illuminated output with delay function?

To activate the illuminated output function:For a one-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute.For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will stay on for 1 minute per flash, up to a maximum of 5 minutes.

Q: What to do if the autopilot stops working due to an overcurrent?

The Deckhand autopilot has built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the autopilot switch down until the circuit flashes to reset it.

Q: Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer includes a memory function that stores the last used light intensity setting.

Q: What is the operating temperature range of this drive?

The drive is designed to operate across a wide temperature range, from -40°C to 85°C.

Conçu pour les systèmes 24 V CC, le variateur Deckhand 7504-BSS de BLUE SEA offre un contrôle numérique précis de l'intensité lumineuse pour les LED non régulées, les ampoules à incandescence et halogènes, avec un courant de sortie maximal de 6 A. Ce modèle se positionne comme la solution 24 V 6 A de la gamme Deckhand, proposant des fonctionnalités telles qu'une sortie illuminée temporisée et une mémoire de réglage. Il inclut un interrupteur momentané (ON)-OFF-(ON).

Napetost: 24 V

12 V 24 V

Tok: 6 A

6 A 12 A

Public priceGet pro pricing

102,30€

102,30€ ~~124,32€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Vrsta vmesnika za upravljanje	Interrupteur momentané (ON)-OFF-(ON)
Vrsta upravljanja	Modulation de largeur d'impulsion (PWM)
Združljivi sistemi osvetlitve	LED non régulées, incandescentes, halogènes
Zone Control	Non
Območje delovne napetosti	18 à 32
Tipična poraba električne energije	<0.048
Vrsta namestitve	Montage sur panneau
Dimenzije izdelka	82.55 x 88.9 x 50.8 mm
Podpora za zatemnitev	Oui
Vsebina paketa	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Črtna koda izdelka	SK-000051475
Certifikati	E marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Maximum Parasitic Current	<2 mA
Maksimalni izhodni tok	6 A
Nazivna napetost	24 V CC
Odoo Category Full Path	Marchandise / NAVICO GROUP / 13 - Blue Sea BSS (35)
Območje delovnih temperatur	−40°C à 85°C
SKU izdelka	7504-BSS
Tip izdelka	Variateur d'intensité

Detailed description

Namenjen za optimalizacijo osvetlitve na krovu, regulator Deckhand 7504-BSS podjetja BLUE SEA je digitalna rešitev za nadzor jakosti svetlobe v sistemih 24 V DC. Omogoča upravljanje z neurejenimi LED, žarnic z žarilno nitjo in halogenkami. Funkcija osvetljene izhoda zagotavlja nastavljivo zakasnitev za varnost pri vkrcanju in izkrcanju, z možnostmi od 1 do 5 minut. Regulator podpira več lokacij stikal in ima vgrajeno pomnilnik za zadnjo nastavitev jakosti.

Funkcije in zmogljivosti

Vgrajen "bulb saver" podaljšuje življenjsko dobo žarnic med polnjenjem baterij na čolnu. Zamaknjene oprijemne jezičke olajšajo stransko namestitev več regulatorjev, kar optimizira prostor v električni razdelilni omari. Vgrajena zaščita pred preobremenitvijo zagotavlja varnost vezja, sistem pa se lahko ponastavi tako, da držite stikalo regulatorja pritisnjeno, dokler vezje ne utripa.

Tehnične specifikacije in skladnost

Regulator Deckhand 7504 deluje pri nazivni napetosti 24 V DC z delovnim območjem od 18 V do 32 V in zagotavlja maksimalno izhodno tok 6 A. Njegova poraba v mirovanju je manjša od 2 mA, deluje pa v razširjenem temperaturnem območju od −40°C do 85°C. Kontrola svetlosti poteka s pulzno širinsko modulacijo (PWM), kar zagotavlja gladko spreminjanje. Izdelek je skladen z normami E, ISO 8846 in SAE J1171 za zaščito pred zunanjim vžigom, kar potrjuje njegovo zanesljivost v morskem okolju.

Položaj v paleti BLUE SEA

V paleti Deckhand podjetja BLUE SEA je ta model 7504 referenčna rešitev 24 V DC 6 A. Dopolnjuje različice 12 V DC, kot so 7506 (6 A), 7507 (12 A) in 7508 (25 A), ter druge modele 24 V DC z večjo močjo, kot je 7509 (12 A). Ta regulator je namenjen zamenjavi prejšnjih referenc, kot so modeli 7501 ali 7502, z izboljšanimi zmogljivostmi v smislu toka in funkcionalnosti za sisteme 24 V.

Documentation

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 6A

Payment and security

Your payment information and data are processed securely.

Regulator Deckhand - 24 V DC 6 A

102,30€

102,30€ ~~124,32€~~

Frequently asked questions

Need help? Contact us

What is the BLUE SEA Deckhand 7504-BSS dimmer?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control lighting intensity aboard boats. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Which types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LED lights, incandescent bulbs, and halogen lights.

What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS variable speed drive operates on a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

What is the maximum output current this drive can handle?

The Deckhand 7504-BSS drive can deliver a maximum output current of 6 amperes (6 A).

How does the Deckhand dimmer control the brightness of the lights?

Brightness is controlled via pulse-width modulation (PWM), ensuring smooth and progressive adjustment of light intensity.

What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

How to use the illuminated output with delay function?

To activate the illuminated output function:

For a one-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute.

For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will stay on for 1 minute per flash, up to a maximum of 5 minutes.

What to do if the autopilot stops working due to an overcurrent?

The Deckhand autopilot has built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the autopilot switch down until the circuit flashes to reset it.

Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer includes a memory function that stores the last used light intensity setting.

What is the operating temperature range of this drive?

The drive is designed to operate across a wide temperature range, from -40°C to 85°C.

What is the power consumption of the drive in standby (parasitic) mode?

The maximum parasitic consumption of the Deckhand drive is less than 2 mA.

Is it possible to use this variable speed drive with 12 V DC electrical systems?

No, this specific model (7504-BSS) is designed for 24 V DC systems. BLUE SEA offers other Deckhand models for 12 V DC systems.

Can multiple switches be connected to the Deckhand dimmer to control lights from different locations?

Yes, the Deckhand dimmer is designed to support multiple switch locations, allowing brightness control from different points on board.

How do offset mounting tabs make installation easier?

The offset mounting tabs allow multiple drives to be installed side by side in a compact arrangement, thus optimizing the available space on the electrical panel.

Which type of switch is included with the Deckhand 7504-BSS dimmer?

The dimmer is supplied with a momentary switch (ON)-OFF-(ON) (reference PN 8216).

How to connect the inverter to the boat's electrical system?

The inverter is connected as follows:

The red wire connects to the +24V DC power supply.The two black wires connect to ground (negative bus bar).The blue wire connects to the lamp.The gray and white wires are the inputs for the switch (Down Input and Up Input).A fuse must be installed on the +24V DC line before the inverter.

What are the dimensions of the Deckhand 7504-BSS drive?

The Deckhand 7504-BSS drive has a width of 3.25 inches (82.55 mm) and a height of 3.5 inches (88.9 mm).

Is the Deckhand 7504-BSS variable frequency drive compliant with marine standards?

Yes, this VFD is E-marked and compliant with external ignition protection requirements of ISO 8846 and SAE J1171 standards. It also meets SAE J1455 and SAE J1113 standards.

Can I use this dimmer with LEDs that already have a built-in driver?

No, the Deckhand 7504-BSS dimmer is specifically designed for unregulated LEDs, as well as incandescent and halogen bulbs. Using it with already-regulated LEDs may not work properly or could damage the dimmer or the lights.

Is it necessary to add a fuse when installing the variable speed drive?

Yes, it is necessary to install a fuse on the +24V DC power line before the variable speed drive to ensure circuit protection, as shown in the installation diagram.