Vžigalna nosilka v seriji ATO / ATC

The BLUE SEA 5064-BSS inline fuse holder is an electrical component designed for individual protection of marine circuits. It is used to isolate and secure specific onboard equipment, preventing damage caused by overcurrent. Its inline design makes it compact and ideal for installations where space is limited or for devices requiring dedicated protection.

The main function of this fuse holder is to protect an electrical circuit from overcurrents. If the current exceeds the rated value, the fuse inside will blow, thereby interrupting the circuit and safeguarding the connected equipment from potential damage.

An inline fuse holder, such as the 5064-BSS model, is designed to protect a single electrical circuit individually and in a decentralized manner. A fuse block, on the other hand, is a centralized device that allows you to protect and distribute power to multiple circuits simultaneously.

No, the ATO/ATC inline fuse block BLUE SEA 5064-BSS is sold without fuses. Fuses must be purchased separately based on the amperage required by the equipment to be protected.

Yes, the fuse holder itself is reusable. When the fuse inside it blows due to an overcurrent, simply replace it with a new fuse of the appropriate amperage to restore circuit protection.

Yes, its inline design makes it particularly suitable for installations where space is limited. It provides a compact solution to add dedicated protection for a piece of equipment without requiring a large distribution panel.

The 5064-BSS fuse holder is not designed to allow direct visual inspection of the fuse status without opening it. To check the fuse, the fuse holder housing must be opened.

ATO/ATC fuse holders are generally compatible with 12V and 24V marine electrical systems, as well as other common DC voltages. The maximum supported voltage will primarily depend on the inserted fuse and the wiring specifications.

Yes, as it is compatible with ATO and ATC type fuses, this fuse holder can also be used in automotive applications, since these fuse types are widely used standards in vehicles.

This fuse block is compatible with ATO and ATC type fuses. These are standard blade fuses, widely used in marine and automotive applications.

Yes, as long as the fuses are ATO or ATC type and meet standard dimensions and specifications, they will be compatible with this fuse holder regardless of brand.

This fuse holder is ideal for protecting auxiliary electronic devices such as VHF radios, secondary GPS units, courtesy lighting, low-amp bilge pumps, or any other equipment requiring dedicated and easily accessible circuit protection.

Yes, ATO/ATC fuses and their holders are designed to work effectively with standard marine 12V and 24V electrical systems.

Yes, you can use fuses of different ratings (amperages) as long as they are ATO or ATC type. It is crucial to select the correct amperage for the equipment to be protected to ensure effective protection and avoid nuisance tripping or damage.

To install the inline fuse holder, it must be inserted inline on the positive power wire of the circuit you wish to protect. You need to cut the wire, strip the ends, then connect each end of the wire to the fuse holder terminals, typically by crimping or soldering, ensuring a secure and insulated connection.

Typical tools required for installation include wire strippers to prepare the wires, a crimping tool if using crimp connectors, and possibly a soldering iron if you prefer soldered connections. Electrical tape or heat-shrink tubing may also be useful for insulating the connections.

The fuse holder should be installed as close as possible to the power source of the device it protects, or where the power wire connects to the main system, to protect the entire downstream circuit.

To replace a fuse, simply open the fuse block housing. Remove the faulty fuse and insert a new fuse of the correct amp rating and type ATO or ATC. Ensure the circuit is powered off before handling the fuse.