Vžigalna vložka AMG® - 150 A

The primary function of this AMG® 150 A fuse is to protect high-current DC electrical circuits on board vessels. It is essential to prevent equipment damage and fire hazards caused by electrical overcurrents.

The nominal current rating of this fuse is 150 amperes (150 A). This means it is designed to operate normally up to this current and will blow if the current exceeds this value for a given period.

No, an AMG® fuse is not reusable after it has blown. Once the internal element has melted due to an overload, the fuse must be replaced with a new fuse of the same type and rating to ensure continuous circuit protection.

This fuse is particularly suited to the marine environment because AMG® BLUE SEA fuses are renowned for their reliability in the face of specific constraints of this environment, such as significant vibrations and humidity. Their design ensures robust protection under these demanding conditions.

This AMG® fuse is commonly used in 12V or 24V marine DC electrical systems. It is designed to provide effective protection in these direct-current systems.

An AMG® fuse differs from an ATO/ATC fuse in its ability to handle high current loads. ATO/ATC fuses are more common for low to medium current circuits, whereas AMG® fuses are designed for applications requiring robust protection for higher currents.

AMG® fuses are generally used for high currents, but they differ from ANL or MIDI fuses, which are often employed for even higher currents or in different mounting configurations. The choice between these types depends on the current intensity to be protected and the type of fuse holder required.

Yes, the AMG® 150 A fuse is designed to provide fast-acting protection in case of electrical overload. This feature is critical to minimize the risk of damage to connected equipment and prevent hazardous situations.

The supplier reference (Supplier Ref) for this AMG® 150 A fuse is 5103B-BSS.

The SKU (product reference) for this AMG® 150 A fuse is 5103-BSS.

To install this AMG® fuse, a compatible fuse holder is essential. The compact design of the fuse makes installation easier, but an appropriate fuse holder is required for a secure and compliant connection.

No, an AMG® fuse, like most protection fuses, has no specific installation direction. It can be inserted into the fuse holder in any orientation, as long as it is properly seated and makes electrical contact.

This AMG® fuse should be installed as close as possible to the power source or the device it is intended to protect. This ensures maximum protection against potential overcurrents in the circuit.

Before replacing this fuse, it is crucial to cut off the electrical power to the relevant circuit to avoid any risk of electric shock or short circuit. Ensure you also use a replacement fuse with the same amp rating to maintain adequate protection.

To ensure the fuse is correctly installed, check that it is firmly inserted into the compatible fuse holder and that the contacts are properly established. The fuse holder must be securely mounted, and the cable connections must be tight to prevent excessive resistance or loosening due to vibrations.

Yes, this AMG® fuse is compatible with marine electrical systems operating at 12V and 24V. It is designed to provide reliable protection in both common voltage configurations.

This fuse is specifically designed for protecting high-current marine circuits, such as main power lines, inverter circuits, or bow thruster systems. It is engineered for applications requiring robust protection.

While technically possible, it is not recommended to use a 150 A fuse to protect low-current circuits. A fuse must be correctly sized for the circuit it protects. Using a fuse with a higher current rating would not provide adequate protection for a low-amp circuit.

Yes, this fuse is designed to be compatible with fuse holders specifically designed for AMG® type fuses. Ensure the fuse holder you are using is of this type to guarantee correct and secure installation.