Črna skrinjica GPSMAP® 9500

The Garmin GPSMAP 9500 Black Box is a high-end chartplotter designed for professional marine navigation systems and complex installations. It offers superior integration flexibility and requires an external HDMI-compatible monitor for operation.

The unit supports screens up to 4K resolution at 60 frames per second (fps) for HDMI IN 1 input and up to 4K at 30 fps for HDMI IN 2 input. The HDMI OUT output to the main monitor is also 4K compatible.

No, the GPSMAP 9500 Black Box does not have an integrated display. It requires an external HDMI-compatible monitor for operation and data display.

The GPSMAP 9500 provides comprehensive navigation features, including waypoint, route, and track creation and management. It also supports Auto Guidance functionality and zone boundary (boundaries) creation.

Yes, the GPSMAP 9500 unit is compatible with detailed charting. It can display navigation charts, fishing charts, 3D views (such as Fish Eye 3D), tide information, satellite imagery, and aerial photos of landmarks.

Yes, the GPSMAP 9500 supports voice control. You can use a compatible wireless headset or a compatible Garmin watch to interact with the chartplotter using voice commands.

You must mount the unit in a location that will not be submerged, with adequate ventilation to prevent heat buildup. It must also be at least 2.54 cm (1 inch) away from cables and other potential sources of interference, and protected from extreme temperatures.

The red wire must be connected to the power source via a switch or another manual switch to turn the device on and off. The black wire must be connected to the battery’s negative terminal or to ground. The inline fuse holder must not be removed.

Yes, the power cable can be extended using the appropriate wire gauge. Here are the recommendations:

Up to 4.6 m (15 ft): Extension wire 10 AWG (5.26 mm²)Up to 7 m (23 ft): Extension wire 8 AWG (8.36 mm²)Up to 11 m (36 ft): Extension wire 6 AWG (13.29 mm²)

Yes, the GPSMAP 9500 powers on automatically as soon as power is applied. This automatic power-on function cannot be disabled.

In most installation scenarios, no additional chassis grounding is required. However, if you experience interference, you can use the grounding screw on the housing to connect the device to the boat’s water ground to reduce such interference.

The unit uses Garmin BlueNet™ network ports to share data (radar, sonar, chartplotter) with other Garmin BlueNet devices. For older Garmin Marine Network devices, a Garmin BlueNet 30 gateway is required.

Yes, the GPSMAP 9500 unit can connect to an existing NMEA 2000 network on your boat to share data with compatible devices, such as a GPS antenna or VHF radio.

No, the GPSMAP 9500 is not powered via the NMEA 2000 network. It must be connected to a separate power source.

Yes, you can connect a third-party touchscreen. Video data is sent via the HDMI connection and touch data via the USB connection. Garmin-specific adapter cables are recommended for these connections.

If you are not using a touchscreen, you can control the GPSMAP 9500 with a GRID™ device (except the GRID 20 for full power on/off), another Garmin chartplotter, or a GMM™ monitor.

Yes, the GPSMAP 9500 unit is compatible with the ActiveCaptain app. This allows for software updates, chart updates, receiving notifications, and connecting to the Garmin Quickdraw™ Contours community.

Yes, the GPSMAP 9500 unit has a J1939 port for engine data integration, allowing you to view engine information on your navigation system.

Connecting the power cable without the appropriate fuse in place voids the product warranty. Additionally, damage caused by extreme temperatures exceeding the specified range and their consequences are not covered by the warranty.