Radarska podstavek GMR Fantom 12x, zgornji del

The GMR Fantom 12x radar pedestal upper section is the main assembly of the Garmin GMR Fantom 12x open array radar systems. It is specifically designed to house the essential radar electronics and to support the antenna. This component is fundamental to ensuring proper operation, stability, and structural integrity of the entire radar system aboard your vessel. It can be used as a spare or replacement part for existing GMR Fantom 12x installations.

To ensure optimal performance and safety, the GMR Fantom 12x radar pedestal must be installed while respecting several key considerations:

It must be positioned out of reach of people, with the vertical beam above head height. The minimum safe distance from people must be respected (this value is specified in the product specifications). The radar must be mounted high relative to the vessel’s keel line, with minimal obstructions to the radar beam. The mounting surface must be flat and sufficiently robust to support the radar’s weight. The pedestal must be mounted at a safe distance from heat sources, spreaders, and mast cross-ties. It must be kept at a safe distance from a magnetic compass, as specified in the product specifications. Other electronic equipment and cables must be more than 2 meters away from the radar beam path. GPS antennas must be either above or below the radar beam path.

Connecting the GMR Fantom 12x radar pedestal to the power supply can be done in two main ways, depending on whether your model is supplied with a voltage converter or not:

With a voltage converter: If your model comes with a converter, you must install it. The converter requires an input voltage of 10 to 32 V DC and should be installed as close as possible to the power source. The radar's power cable includes a 15 A fuse that must not be removed. A 30 A fuse is also included to connect the converter to the boat's battery.

Directly to the battery (without converter): Some radar models do not require a voltage converter and can be connected directly to the boat's battery (10 to 32 V DC). In this case, the 15 A inline fuse holder on the radar's power cable must not be removed.

It is recommended to connect the power cable directly to the battery. Any cable extension must use a wire gauge suitable for the length to avoid radar malfunction due to insufficient power supply.

Always ensure proper grounding and polarity to prevent damage to the radar or electrical system.

Yes, the GMR Fantom 12x radar pedestal, as well as the voltage converter (if applicable), must be connected to a water ground. To do this, use a 3.31 mm² (12 AWG) copper wire, which is not included with the product. This wire must be routed to a water ground location and connected to the ground connector on the pedestal. After connection, the ground screw and crimp connector must be covered with marine sealant to ensure waterproofing. It is important to note that the ground connection must be made to a water ground, not the negative terminal of the battery.

The GMR Fantom 12x radar pedestal is specifically designed for the Garmin GMR Fantom 12x open array radar series. It is compatible with 4- or 6-foot antennas from the GMR Fantom range. The pedestal serves as a structural support and houses the electronics required for these antennas, delivering superior resolution and range for detecting targets at sea.

The Garmin GMR Fantom radar systems, for which this pedestal is a key component, are recognized for integrating advanced technologies that significantly enhance target detection and discrimination. Among these technologies, the following stand out:

MotionScope™: This technology uses Doppler effect to detect and highlight moving targets, helping users quickly identify potential threats or schools of fish.Pulse compression: This technology delivers high resolution and excellent target detection, even at long range, while optimizing transmitted energy.These innovations are crucial for safe navigation and better awareness of the marine environment.

Yes, it is strongly recommended to have the GMR Fantom 12x radar pedestal installed by a qualified marine installer. This recommendation aims to ensure optimal system performance, prevent potential damage to the device or vessel, and above all, ensure safety. Installation involves important considerations regarding positioning, wiring, grounding, and handling electromagnetic energy, which require specific expertise. Additionally, opening the device by anyone other than a Garmin-authorized service technician will void the product warranty.