Sonde Garmin GT52HW-TM en plastique, pour montage sur tableau arrière ou moteur électrique, CHIRP large et haute (150-240 kHz, 250 W)/CHIRP ClearVü et CHIRP SideVü (455/800 kHz, 500 W, 12 broches) - Garmin

Sonde GT52HW-TM - tableau arrière CHIRP/ClearVü/SideVü - visuel officiel Garmin 2

Sonde GT52HW-TM - tableau arrière CHIRP/ClearVü/SideVü - visuel officiel Garmin 3

Sonde GT52HW-TM - tableau arrière CHIRP/ClearVü/SideVü - visuel officiel Garmin 4

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 21%

Garmin

010-12405-00

Sonda GT52HW-TM - zadnja tabla CHIRP/ClearVü/SideVü

La sonde Garmin GT52HW-TM est un transducteur 12 broches multifréquence CHIRP large et haute (150-240 kHz, 250 W), intégrant également les technologies CHIRP ClearVü et SideVü (455/800 kHz, 350 W). Idéale pour les pêcheurs en eau douce, elle offre une imagerie détaillée des poissons et des structures sous-marines. Ce modèle est conçu pour un montage flexible sur tableau arrière ou moteur électrique. Inclus : sonde GT52HW-TM, support tableau arrière, support moteur électrique, matériel de montage et documentation.

Public priceGet pro pricing

289,93€

289,93€ ~~369,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Podprte sonar tehnologije	CHIRP traditionnel,ClearVü,SideVü
Delovna napetost	12 V
Frekvence sonarja	150-240, 455, 800
Vrhovna moč	500.0
Maksimalna globina merjenja	244.0
Material sondne sonde	Plastique
Tip konektorja za sonar	12 broches
Dolžina kabla	6.1
Vgrajen senzor temperature	Oui
Združljivi prikazovalniki	Garmin EchoMap, GPSMAP, Striker
IP razred	IPX7
Združljivost z vodilo	Propriétaire Garmin (12 broches)
Žično omrežje	Propriétaire Garmin (12 broches)
Brezžična povezanost	Non
Tip montaže	Tableau arrière, moteur électrique
Certifikati	CE
Kot prekrivanja snopa	24°-16° (Traditionnel), 2.0°x50° (ClearVü/SideVü 455 kHz), 1.0°x30° (ClearVü/SideVü 800 kHz)
Visoka frekvenca CHIRP	455/800
Nizka frekvenca CHIRP	150-240
Kompatibilni model	Garmin EchoMap, GPSMAP, Striker
Vrsta ribolova	lac, rivière
Hull Material Compatibility	Fibre de verre,Aluminium,Bois,Acier
Installation Expertise Required	Installateur marin qualifié
Potreben orodji za namestitev	Tournevis Phillips,Perceuse,Forets,Ruban de masquage,Mastic marin,Ruban étanche
Vgrajen senzor hitrosti	Non
Vključena montažna vijak	Oui
Mounting Location Avoidance	Près de l'hélice, derrière les virures, les renforts, les raccords, les prises ou sorties d'eau, ou toute source de turbulence/bulles d'air
Vključena montažna šablona	Oui
Optimal Speed Mph	34
Leto izdaje	2017.0
Transducer Operation Condition	Nécessite un contact constant avec l'eau
Vessel Type Restriction	Voilier
Vulnerability Type	Dommages externes par remorques ou obstructions sous-marines

Detailed description

Namenjena ribičem v sladkih vodah, Garminova sonda GT52HW-TM je univerzalni 12-žilni pretvornik, ki ponuja tradicionalne sonar CHIRP ter tehnologiji ClearVü in SideVü. Predstavlja integrirano rešitev za raziskovanje podvodnega sveta in detekcijo rib, saj se razlikuje od enofrekvenčnih modelov po bogastvu informacij. GT52HW-TM je združljiva z namestitvijo na zadnjo tablo ali električni motor, kar zagotavlja fleksibilnost za različne vrste manjših in srednje velikih plovil.

Podrobnosti o sonarju

Srce Garminove sonde GT52HW-TM je v njenih številnih CHIRP frekvencah. Tradicionalni sonar uporablja široko frekvenčno območje od 150 do 240 kHz z močjo 250 W, kar zagotavlja jasne odmeve in ločljivost tarč do globine 244 metrov (800 čevljev). Za slikanje struktur uporabljata tehnologiji ClearVü in SideVü frekvenci 455 kHz (425–485 kHz) in 800 kHz (790–850 kHz), vsaka z močjo 350 W, kar zagotavlja podroben pogled na dno in stranske strukture do globine 152 metrov (500 čevljev). GT52HW-TM se tako razlikuje od sond Garmin serije GT20/GT22, ki pogosto ponujajo ožja frekvenčna območja ali nižjo moč za skeniranje, zaradi česar je boljša za detekcijo struktur in rib v plitkih do srednje globokih vodah.

Univerzalnost in integracija

Z tradicionalnim snopom 24°–16° in snopi za skeniranje 2,0°x50° pri 455 kHz ter 1,0°x30° pri 800 kHz zagotavlja Garminova sonda GT52HW-TM ostre slike in natančno definicijo ribjih jate ter podvodnih struktur. Dolžina kabla 6,1 metra (20 čevljev) olajšuje namestitev na večini čolnov. Vključen je tudi senzor globine in temperature, ki dopolnjuje bistvene podatke za ribiča. Njena združljivost z nagibi zadnjih tabel od 0° do 70° jo naredi prilagodljivo širokemu razponu trupov. V primerjavi s specializiranimi pretvorniki, kot so prečni pretvorniki za velike jadrnice ali enote CHIRP z visoko močjo za globokomorsko ribolov, ponuja GT52HW-TM celovito in dostopno rešitev za potrebe ribolova ob obali in v jezerih.

Documentation

Type	Nom
	Gabarit de montage - Gabarit de montage pour sonde Garmin GT52HW-TM
	Manuel utilisateur - Guide de placement des sondes Garmin
	Notice d'installation - Sonde GT52HW-TM : Installation tableau arrière/moteur électrique

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis of the Garmin GT52HW-TM transducer: CHIRP versatility for freshwater »

The Garmin GT52HW-TM transducer is an excellent choice for recreational boaters and freshwater anglers seeking an integrated and high-performance solution. Its main strength lies in combining three CHIRP sonar technologies: traditional wide and high-frequency for fish detection, and ClearVü/SideVü for detailed imaging of structures and the seabed. This versatility is particularly useful for identifying fish-holding zones and underwater relief changes.

In terms of installation, the GT52HW-TM is designed for transom or electric motor mounting, making it accessible for DIY installation on most small boats, from dinghies to small rigid inflatables, without requiring complex hull drilling as with through-hull transducers. The flexibility of electric motor mounting is a notable advantage for trolling anglers or those using auxiliary motors, allowing precise orientation and consistent performance at low speeds. It is critical to ensure optimal positioning, away from turbulence generated by the propeller or other hull appendages, to guarantee maximum signal quality.

Compared to other Garmin transducers, the GT52HW-TM positions itself as a highly effective mid-range solution for freshwater use. It offers a clear advantage in imaging detail over traditional dual-frequency transducers (e.g., 50/200 kHz) and better coverage than transducers dedicated solely to ClearVü. However, it is not designed for extreme depths or offshore applications that would require higher-power CHIRP transducers and different frequencies (e.g., medium or low CHIRP). For freshwater or shallow coastal use, its performance-to-cost ratio is particularly relevant, providing comprehensive visibility without the added cost of more specialized high-end solutions like Panoptix LiveScope, which target specific real-time visualization applications.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda GT52HW-TM - zadnja tabla CHIRP/ClearVü/SideVü

289,93€

289,93€ ~~369,00€~~

Frequently asked questions

Need help? Contact us

Which sonar technologies are integrated in the Garmin GT52HW-TM transducer?

The Garmin GT52HW-TM transducer integrates three main sonar technologies:

Traditional high- and wide-band CHIRP sonar.
CHIRP ClearVü sonar for detailed imaging of structures beneath the boat.
CHIRP SideVü sonar for side-view imaging of structures and fish.

What are the operating frequencies of the traditional CHIRP sonar on this transducer?

The traditional CHIRP sonar of the GT52HW-TM transducer operates over a high and wide frequency range from 150 to 240 kHz.

What is the transmit power of the traditional CHIRP sonar?

The transmit power of the traditional CHIRP sonar is 250 W.

Which frequencies are used by the ClearVü and SideVü sonars?

The ClearVü and SideVü sonars use frequencies of 455 kHz (range 425-485 kHz) and 800 kHz (range 790-850 kHz).

What is the transmit power for ClearVü and SideVü sonars?

Each technology, ClearVü and SideVü, has a transmit power of 350 W.

What is the maximum detection depth for the traditional CHIRP sonar?

The traditional CHIRP sonar can detect targets down to a maximum depth of 244 meters (800 feet).

What is the maximum depth for ClearVü and SideVü sonars to operate?

The ClearVü and SideVü sonars can provide detailed imaging down to a depth of 152 meters (500 feet).

Is this transducer specifically designed for a type of water (fresh or saltwater)?

Yes, the Garmin GT52HW-TM transducer is primarily designed for freshwater anglers.

What is the connector type of the GT52HW-TM depth sounder?

The depth sounder is equipped with a 12-pin connector.

What material is the Garmin GT52HW-TM transducer made of?

The transducer is made of plastic, suitable for mounting on the transom or electric motor.

Which Garmin devices is the GT52HW-TM transducer compatible with?

The transducer is compatible with Garmin displays (chartplotters or fishfinders) that have a 12-pin connector and support CHIRP traditional sonar, ClearVü, and SideVü technologies.

What are the possible mounting methods for this depth sounder?

The depth sounder can be mounted in two main ways: on the boat's transom or on an electric motor.

What are the important considerations for positioning the depth sounder on the transom?

For optimal operation, the transducer must be installed:

Parallel to the waterline.At least 38 cm (15 inches) away from the propeller.Clear of turbulence (strake, water intakes, etc.).On the starboard side if the propeller rotates clockwise, or port side if it rotates counterclockwise.

How to route the transducer cable to avoid interference?

The transducer cable must be routed away from ignition wires, batteries, electric motor cables, and high-energy wires (radar, audio amplifier, autopilot pump) to minimize electromagnetic interference.

Is a template required for mounting on the transom?

Yes, it is highly recommended to use the mounting template provided in the product box to ensure precise drilling and avoid incorrect cuts.

Is it permitted to cut the depth sounder cable to make installation or routing easier?

No, you must not cut the depth sounder cable, as this will void the product warranty.

How to mount the depth sounder on an electric motor?

The depth sounder is mounted to the electric motor body using hose clamps inserted into the support slots. The cable must be routed inside the support and secured with waterproof tape along the motor shaft.

What to do if the depth sounder generates too much spray after installation?

If the sounder produces excessive spray, it is recommended to recheck mounting considerations and adjust its position and depth to eliminate this phenomenon.