Napajalnik 12 V 200 mAh za polnilec

Installation is very simple and requires no configuration.

Plug the adapter into a standard European wall outlet. Connect the other end of the cable to the power port of your compatible ICOM charger. The charger is now powered and ready for use.

Yes, the BC-147SE power supply is an official ICOM accessory. Using an original manufacturer part ensures perfect compatibility, optimal safety, and preserves the performance of your equipment.

No, this power supply is not designed to be connected directly to a radio. It must be used exclusively to power an ICOM-compatible battery charger, which will in turn charge your radio's battery.

The ICOM BC-147SE power supply complies with the strictest European standards to ensure your safety. It meets the following directives:

CE EMC (Electromagnetic Compatibility) marking: 2014/30/EULow Voltage Directive: 2014/35/EUEcodesign: 2009/125/ECRoHS (Restriction of Hazardous Substances): 2011/65/EU

The packaging contains a single item: the ICOM BC-147SE power supply.

Yes, using non-certified or incompatible accessories can damage your charger or batteries. Such damage is typically not covered by the manufacturer's warranty. It is strongly recommended to use original parts such as the BC-147SE.

No, the BC-147SE AC adapter itself does not have a status LED. The charging state (in progress, completed, error) is indicated by the LEDs on the ICOM charger it is connected to.

No, this power supply must not be used with a device requiring more than 200mA. Doing so could damage the power supply and fail to provide adequate power to the device, leading to malfunction.

No, this adapter does not require any specific maintenance. Simply store it in a dry place, protected from moisture and excessive heat, and ensure the cable is not damaged.

If your charger isn't listed, it is strongly discouraged to use this power supply. Even if the voltage appears correct, other parameters such as connector polarity or power requirements may differ and damage your equipment. Use only the power supply specified for your charger model.

Using a power supply with incorrect voltage can cause irreversible damage to your charger. Excessive voltage can "fry" it, while insufficient voltage will prevent it from operating correctly and may also damage it over time.

Yes, as with most electronic devices, it is recommended to unplug the power supply when not in use for an extended period. This helps save energy and protects against potential power surges.

As a product compliant with European low-voltage and electromagnetic compatibility directives, the ICOM BC-147SE power supply includes the basic protections required by these standards for safe use.

Yes, you can plug the power supply into an extension cord or power strip, provided it is in good condition and compliant with current safety standards.

It is normal for a power adapter to emit slight heat during operation, especially when charging a battery. However, if it becomes abnormally hot to the point of being untouchable, unplug it immediately and stop using it.

No, the BC-147SE model is a mains power supply designed to be plugged into a standard wall outlet (220-240V AC). For use in a vehicle, you would need a charger or a specific adapter designed for a 12V DC cigarette lighter socket.