Krogel antene MB-BA016

The MB-BA016 antenna ball joint is an articulated mounting bracket designed by Icom. It allows you to install and orient a marine antenna. Its primary function is to precisely adjust the antenna's angle to optimize signal reception, even when mounted on an inclined surface.

The MB-BA016 antenna ball joint is made of chrome-plated brass. This material is selected for its robustness and corrosion resistance in demanding marine environments.

Yes, absolutely. Made from chrome-plated brass, the MB-BA016 ball joint is designed to provide excellent resistance to corrosion from saltwater, UV rays, and weathering, ensuring long-term durability in marine environments.

Using an articulated ball joint like the MB-BA016 offers several significant advantages:

Positioning flexibility: It allows adjusting the antenna angle for optimal reception, even on inclined surfaces.Signal optimization: Precise antenna positioning ensures better signal acquisition.Safety: It provides rigid antenna support, preventing mechanical play and breakage from vibrations at sea.Ease of handling: It allows folding the antenna for transport, winter storage, or passing under low obstacles.

Yes, the articulated design of the MB-BA016 ball joint facilitates folding down the antenna. This feature is particularly useful during handling operations, trailer transport, winter storage, or when passing under low bridges.

To optimize the reception of your marine antenna's signal using the MB-BA016 ball joint, follow these best practices:

Clear positioning: Install the antenna in a location with an unobstructed 360-degree view of the sky, avoiding obstructions from the mast, radar, other antennas, or any boat structures. The higher and more unobstructed the antenna is, the better the reception will be.

Angle adjustment: Use the articulated function of the MB-BA016 ball joint to precisely adjust the antenna's angle. Even if the mounting surface is tilted (such as on a coachroof or arch), the ball joint allows you to position the antenna perfectly vertical or according to the manufacturer's recommended tilt, which is essential for optimal GNSS/GPS signal acquisition.

Secure fastening: Ensure the ball joint is firmly attached to the mounting surface and that the antenna is securely screwed onto the ball joint. Rigid fastening is essential to prevent any movement or vibration that could degrade signal quality, especially at sea. The MB-BA016 ball joint is designed for stable mounting of Icom antennas.

Avoiding interference: Mount the antenna at a reasonable distance from any potential sources of electromagnetic interference (engines, high-voltage electrical cables, other electronic equipment).

The MB-BA016 ball joint is designed to be mounted on various surfaces of a vessel, including inclined surfaces. It can be installed on the coachroof, console, arch, or any other compatible surface thanks to its angular adjustment capability.

To ensure a solid and durable mounting of your MB-BA016 antenna ball joint on your boat, follow these recommendations:

Choose a robust location: Select a mounting surface that is strong and stable enough to support the weight of the antenna and withstand the stresses from the boat's movements at sea (vibrations, shocks). Although the ball joint allows mounting on inclined surfaces, the base must be solid.Use appropriate fasteners: Use stainless steel screws or bolts of marine-grade quality, with a length suitable for the thickness of your support. If you drill through the deck or a bulkhead, ensure you use a marine-grade watertight seal to prevent water infiltration.Tighten firmly: Securely screw the ball joint to its support. Proper tightening is crucial to avoid any mechanical play that could lead to premature wear or breakage due to vibrations, as mentioned in the product description. Do not overtighten to avoid damaging the support or the ball joint.Regular inspection: After installation and periodically thereafter, check the tightness of the fasteners and the overall condition of the ball joint to ensure it remains securely in place and that no corrosion appears.The MB-BA016 ball joint is designed to fit Icom antennas perfectly, minimizing the risk of play and ensuring a rigid antenna mount.

The MB-BA016 antenna ball joint is typically supplied alone. The specific hardware for mounting on your boat depends on the mounting surface type and its thickness. It is recommended to purchase the appropriate hardware (screws, nuts, washers) separately, in marine-grade stainless steel.

The MB-BA016 swivel features an articulated mechanism that allows the antenna to be tilted. Once the antenna is mounted, you can loosen the swivel's locking mechanism, position the antenna at the desired angle for optimal reception, then firmly tighten the mechanism to secure the angle in place.

The MB-BA016 ball joint is compatible with Icom marine antennas and other brands using a standard 1¼-inch (1"1/4) thread. It is designed to fit the thread and weight of Icom antennas, ensuring secure mounting.

Yes, the MB-BA016 ball joint is compatible with many marine VHF antennas, provided they have a standard 1 1/4-inch (1"1/4) thread. This is a common use case for this type of articulated mount.

Yes, this ball joint is particularly well-suited for mounting GPS or GNSS antennas. Its ability to adjust the angle is beneficial for optimizing positioning signal reception, which is critical for navigation equipment.

Yes, the MB-BA016 ball joint is specifically designed for mounting GNSS/GPS antennas supplied with Icom AIS transponders, such as the MA-510TR model. It ensures stable mounting and optimal positioning for these antennas.

The MB-BA016 antenna ball joint is designed to accommodate antennas with a standard 1 1/4 inch (1"1/4) thread. This is a common thread type for marine antennas.

Yes, the MB-BA016 ball joint may be compatible with antennas from other brands, provided these use the same standard 1¼-inch (1"1/4) thread. It is always advisable to check your antenna’s thread specifications before purchase.

Yes, the MB-BA016 ball joint is specifically designed to withstand the vibrations and shocks inherent in marine navigation. Its robust construction in chrome-plated brass and its design ensure a firm hold on the antenna, preventing any mechanical play that could compromise signal reliability.

Due to its high-quality chrome-plated brass construction, the MB-BA016 ball joint offers excellent durability in a marine environment. This material is known for its corrosion and wear resistance, ensuring a long lifespan and reliable performance even under harsh conditions.

The MB-BA016 antenna bracket package typically contains the bracket itself. Specific mounting hardware for your boat (screws, nuts, washers) and the antenna are not included and must be purchased separately.

Yes, the MB-BA016 antenna bracket is delivered as a complete pre-assembled unit, ready for installation on your vessel. No internal component assembly is required before mounting. Simply secure it to the desired surface and screw in your compatible antenna.