ActiveImaging™ HD 3 v 1 (S/S) – SideScan Fish Reveal

The Lowrance ActiveImaging™ HD 3-in-1 depth sounder integrates several advanced imaging technologies for detecting fish and underwater structures:

CHIRP sonar with medium and high frequencies.SideScan HD imaging for detailed side views.DownScan HD imaging for exceptionally clear views beneath the boat.The FishReveal™ feature, available for DownScan and SideScan, which overlays CHIRP fish arches on DownScan or SideScan images.

This CHIRP sounder operates on two frequency ranges:

83 kHz for CHIRP medium. 200 kHz for CHIRP high.

The ActiveImaging™ HD DownScan technology uses the following CHIRP frequencies for high-definition imaging below the boat:

700 kHz CHIRP. 1200 kHz CHIRP.

For SideScan HD side imaging, this transducer uses the following CHIRP frequencies:

455 kHz CHIRP. 1075 kHz CHIRP.

In CHIRP Sonar mode (83 kHz/200 kHz), the ActiveImaging™ HD 3-in-1 transducer can reach a maximum depth of 305 meters.

Depth and range capabilities for DownScan and SideScan imaging are as follows:

DownScan: Up to 46 meters at 700 kHz. Up to 27 meters at 1200 kHz. SideScan: Lateral range up to 91 meters at 455 kHz. Lateral range up to 46 meters at 1075 kHz.

The FishReveal™ function combines traditional CHIRP sonar data with high-resolution DownScan or SideScan images. It overlays clear fish arches from CHIRP on the detailed DownScan or SideScan views, making it much easier to identify fish relative to underwater structures.

FishReveal DownScan is available directly on HDS PRO displays. FishReveal SideScan requires the addition of the S3100 module (sold separately).

The ActiveImaging™ HD 3-in-1 transducer is supplied with a 7.6-metre (25-foot) cable.

The weight of the ActiveImaging™ HD 3-in-1 transducer (SKU: 000-16060-001) is 1.2 kg (2.64 lbs).

The ActiveImaging™ HD transducer is designed to operate within an extended temperature range:

Operating temperature: From -15 °C to +55 °C (from +5 °F to +131 °F).Storage temperature: From -30 °C to +70 °C (from -22 °F to +158 °F).

To achieve the best performance from the sounder, the recommended maximum operating speeds are:

For CHIRP sonar (high-speed bottom tracking): up to 48 knots (55 mph). For DownScan and SideScan technologies (detailed imaging): up to 9 knots (10 mph).

The ActiveImaging™ HD 3-in-1 transducer provides several essential data types for navigation and fishing:

CHIRP sonar data.Detailed SideScan imaging.High-resolution DownScan imaging.Water temperature.

This transducer is designed to be installed in different ways to suit your boat's configuration. Possible mounting options include transom mounting and hull mounting.

The mounting kit supplied with the depth sounder includes the following components:

3 mounting screws for the transom (#10 x 1-1/4").3 flat washers #10 for the transom mounting screws.2 clamp assembly bolts, M6 flange head.2 M6 flange nuts for clamp assembly.6 depth sounder mounting screws M4.6 M4 mounting washers.2 cable ties, to secure the cable if necessary.

For installing the transducer, the following tools and supplies (not included) are required:

A drill. A 3 mm (1/8") bit. A Phillips screwdriver. A high-quality marine-grade adhesive/sealant for below-waterline applications. Two 10 mm wrenches.

For passing the depth sounder cable through the hull or transom, a 26 mm hole diameter is recommended.

The FishReveal DownScan function of this transducer is directly compatible and available on Lowrance HDS PRO displays, allowing CHIRP fish arches to be overlaid on DownScan imagery.

Yes, to use the FishReveal SideScan function with this transducer, the S3100 module is required. This module is sold separately.

The ActiveImaging™ HD 3-in-1 transducer is equipped with a 9-pin connector, ensuring a reliable connection to your compatible device.

Yes, this transducer can be installed on an aluminum hull. However, to prevent corrosion between the mounting bracket and the aluminum hull, it is imperative to use a plastic insulating material, such as King StarBoard®, between the two surfaces. M5 metal screws are also recommended for this type of installation.