Sonda Eagle SplitShot

The Lowrance Eagle SplitShot depth sounder uses SplitShot technology. This combines a traditional wide-angle CHIRP sonar with DownScan Imaging for clear visualization of fish and underwater structures.

The Eagle SplitShot fishfinder operates at frequencies of 455 kHz and 800 kHz. These frequencies provide superior clarity and target separation for precise fish detection and identification of submerged structures.

The SplitShot transducer offers two types of imaging:

Traditional wide-angle CHIRP sonar for fish detection in arc form.
DownScan Imaging for detailed visualization of underwater structures.

Yes, the Eagle SplitShot transducer, like the Eagle series displays it interfaces with, meets IPX7 waterproofing standards. This ensures resistance to temporary immersion.

No, the SplitShot transducer does not include the SideScan function. This function is available on TripleShot transducers. The SplitShot focuses on CHIRP wide-angle and DownScan Imaging.

The SplitShot transducer provides both traditional wide-angle CHIRP sonar and DownScan Imaging. In contrast, the Bullet Skimmer transducer is limited to traditional CHIRP sonar only and is compatible with the Eagle 4x.

The SplitShot transducer can provide detailed information to the angler, including:

Clear fish arches thanks to the CHIRP wide-angle fishfinder.Detailed images of underwater structures, such as bottom contours, rocks, and vegetation, via DownScan Imaging.

The Lowrance Eagle SplitShot transducer is designed to optimize fishing and navigation experience, making it suitable for versatile use in both freshwater and saltwater environments for detecting fish and underwater structures.

Yes, the Lowrance Eagle SplitShot is a transducer designed to be mounted on the transom of your boat.

The Eagle SplitShot transducer is specifically compatible with the following Lowrance fishfinder/chartplotter combos:

Lowrance Eagle 5Lowrance Eagle 7Lowrance Eagle 9It ensures seamless integration and optimal performance with these models.

The Eagle SplitShot transducer is specifically designed for optimal integration and performance with Lowrance fishfinder/chartplotter combos from the Eagle series (Eagle 5, Eagle 7, Eagle 9). The context does not mention compatibility with other brands.

No, the SplitShot transducer is not compatible with the Lowrance Eagle Eye 9. The Eagle Eye 9 model is designed to be compatible only with Eagle Eye™ specific transducers.

The Lowrance Eagle 5, Eagle 7 and Eagle 9 displays feature a single transducer port compatible with SplitShot and TripleShot transducers. The SplitShot transducer therefore uses this standard connector type for the Eagle series.

To clean the transducer and the housing, use warm water with a drop of dish soap or mild detergent. It is important not to use a jet or high-pressure washer.

The depth sounder is a transom-mounted transducer. For optimal positioning, it is important to choose a location where the transducer will be permanently submerged and shielded from turbulence. It is recommended to consult the installation manual provided with your Lowrance Eagle display for detailed instructions on mounting and secure attachment.

Yes, on Lowrance Eagle combos it is possible to configure depth offsets. You can set:

The distance between the transducer and the lowest point of the boat (negative value, e.g. -0.3 m). The distance between the transducer and the water surface (positive value, e.g. +0.5 m).