Sondirni sistem EAGLE 5" 50/200 HDI

The Lowrance EAGLE 5" fishfinder has a 5-inch screen with a resolution of 800 x 480 pixels. It offers viewing angles of 80° in all directions (up, down, left, right) for optimal readability.

The Lowrance EAGLE 5" HDI fishfinder integrates Hybrid Dual Imaging (HDI) technology. This technology combines traditional 50/200 kHz sonar with DownScan imaging, enabling clear detection of underwater structures and fish.

The depth sounder uses traditional frequencies of 50/200 kHz. For DownScan and SideScan imaging (if a compatible TripleShot transducer is used), it operates at frequencies of 455 kHz and 800 kHz.

Yes, the Lowrance EAGLE 5" HDI fishfinder has an IPX7 waterproof rating. This means it is protected against temporary immersion in water.

The depth sounder is equipped with a microSD card reader. It supports cards with a maximum capacity of 32 GB, allowing you to integrate charts and record sonar data (.sl2 files).

To clean your depth sounder housing, use warm water with a small amount of dish soap or mild detergent. It is important not to use a water jet or high-pressure cleaner.

The depth sounder is designed to operate within a temperature range of -15°C to 55°C (5°F to 131°F). For storage, the temperature range is -20°C to 60°C (4°F to 140°F).

The weight of the Lowrance EAGLE 5" fishfinder screen alone is 0.46 kg (1.01 lb).

Yes, the depth sounder can record sonar data. This data is saved as .sl2 files on a microSD card inserted in the card reader.

The depth sounder can display different types of alarms, each associated with a color to indicate its severity:

Red: Critical alarmOrange: Important alarmYellow: Standard alarmBlue: WarningGreen: Minor warning

A 3 A fuse is recommended to protect the fishfinder's electrical installation.

The Lowrance EAGLE 5" fishfinder can be mounted in two main ways: flush-mounted on the dashboard or with a bracket (mounting on a support).

For dashboard mounting, a dashboard gasket kit (reference 000-16253-001) is available and can be used for optimal and watertight installation.

The depth sounder has a single sonar port compatible with Lowrance SplitShot and TripleShot transducers.

The depth sounder's microSD card reader supports cards with a maximum capacity of 32 GB.

Yes, the depth sounder can export user data such as waypoints and routes. The available export formats are User Data Version 6 and Version 4 files, which include information like the creation date and time of a route.

Yes, this depth sounder can support the SideScan function if a compatible transducer, such as a TripleShot, is connected to the device's single sonar port. The frequencies used for SideScan are 455 kHz and 800 kHz.

The Lowrance EAGLE 5" fishfinder integrates Hybrid Dual Imaging (HDI) technology. This combines traditional sonar operating at 50/200 kHz frequencies for standard fish detection with DownScan imaging (455/800 kHz), which provides a highly detailed, near-photographic view of underwater structures beneath the boat.

The fishfinder must be connected to a 12 V DC electrical system (it tolerates a range from 10.8 to 18 V DC). Its maximum power consumption is very low, at only 3.48 W (290 mA). To effectively protect your device and your electrical installation, it is imperative to use a 3 A fuse.

This device is equipped with a microSD card reader. To ensure smooth reading and proper recording of your waypoints, routes, or navigation data, the maximum card capacity must not exceed 32 GB.