DT-800 senzor temperature in globine NMEA 2000, kabel 2 m

The Navico DT-800 sensor is compatible with all multifunction displays supporting the NMEA 2000 network. It integrates particularly well with brands within the Navico group (B&G, Simrad, Lowrance), but will work with any device compliant with the NMEA 2000 standard.

The DT-800 sensor comes with a 2-meter cable.

No, the DT-800 only measures water depth and temperature. For speed, you would need a DST (Depth, Speed, Temperature) transducer or use GPS data.

Installing the DT-800 requires drilling the hull for the transducer. It is recommended to follow the instructions provided in the installation manual. Watertightness must be ensured with a suitable gasket and marine-grade sealant.

The DT-800 is powered by 12VDC directly via the NMEA 2000 network. No separate power wiring is required.

The DT-800 is suitable for most boats, whether sailboats or powerboats. It is particularly useful for those that already have a speed source (GPS) and are looking for a reliable depth and temperature sensor.

The DT-800 comes with the sensor and its 2m cable. Installation accessories (sealant, drilling tools, etc.) are generally not included.

The installation manual for the DT-800 is usually available on the manufacturer's website, Navico, in the support or downloads section.

Yes, the DT-800 is designed for use in both fresh water and salt water.

The DT-800 connects directly to your boat's NMEA 2000 backbone using a standard NMEA 2000 connector. Once connected, it will be automatically detected by compatible devices.

The depth measurement accuracy of the DT-800 depends on several factors, including installation quality and water conditions. However, it is designed to provide reliable data for navigation.

Periodic cleaning of the sensor surface may be necessary to ensure optimal performance. It is important to remove any buildup of algae or dirt.

No, the DT-800 is only compatible with NMEA 2000 networks. For use with an NMEA 0183 network, a converter may be required.

Temperature display (Celsius or Fahrenheit) depends on the settings of the multifunction display to which the DT-800 is connected.

First, check the NMEA 2000 connections and power supply. Ensure the sensor is correctly recognized by your multifunction display. Refer to the installation manual for troubleshooting or contact Navico technical support.

The DT-800 is designed to withstand harsh marine conditions but is not specifically rated as UV-resistant as it is a through-hull sensor installed below the waterline.

The weight of the DT-800 sensor is 0.9 kg.

Painting the DT-800 is not recommended as it may affect performance and potentially damage the sensor.

Yes, there are alternatives such as DST probes (Depth, Speed, Temperature) which also measure speed, or other depth and temperature sensors from different brands compatible with NMEA 2000.

The DT-800 is manufactured by Navico.