Adaptacijska plošča AXIOM 9 PRO za rezino E90W

This adapter plate, part number A80530, is specifically designed for installing a Raymarine Axiom 9 Pro multifunction display (MFD).

It is designed to be installed in an existing cutout that was originally intended for a Raymarine E90W display.

No, the A80530 mounting plate is specifically sized for the Raymarine Axiom 9 Pro display. It is not compatible with other Axiom screen sizes.

No, this mounting plate is specifically designed to modernize an installation from a Raymarine E90W display to an Axiom 9 Pro. It is not compatible with older E-Series Classic or C-Series models.

No, this plate is designed for a direct transition from the Raymarine E90W to the Axiom 9 Pro. It is not intended for use with cutouts from displays of other brands.

The A80530 mounting plate is designed to fit Raymarine Axiom 9 Pro displays in general, with no distinction between specific versions mentioned in the provided information.

The main advantage is to simplify upgrading your navigation system. It allows installation of an Axiom 9 Pro display in an existing cutout for an E90W, avoiding expensive and complex modifications to the dashboard or navigation console.

The overall dimensions of the A80530 mounting plate are 316.4 mm in width and 196.5 mm in height.

The internal cutout for the Axiom 9 Pro display measures 282.4 mm in width and 160.0 mm in height.

Yes, this plate is specifically designed to allow a flush-mounted installation of the Axiom 9 Pro display, ensuring a clean, integrated finish with the dashboard.

Yes, the A80530 adapter plate is an official Raymarine accessory, designed to integrate seamlessly with their equipment.

No, reference A80530 corresponds solely to the mounting plate. The Raymarine Axiom 9 Pro display must be purchased separately.

No. One of the main advantages of this plate is that it is designed to avoid costly and complex dashboard modifications by using the existing Raymarine E90W cutout.

The mounting plate’s attachment points are precisely aligned to match the specifications of the E90W and Axiom 9 Pro displays, ensuring secure installation and perfect integration. It uses the existing cutout.

No, a full cutout is not required. The A80530 plate is specifically designed to fit into the existing E90W screen cutout, making the upgrade straightforward.

The A80530 adapter plate provides adequate coverage of the E90W’s original cutout and allows the Axiom 9 Pro to be installed flush-mounted, resulting in a clean and aesthetic finish at the helm.

Yes, by avoiding the need for new cutouts or additional carpentry work, the mounting plate helps maintain the structural integrity of the existing dashboard panel.

Yes, the mounting points are precisely aligned and pre-drilled on the bracket to match the specifications of the E90W and Axiom 9 Pro displays, ensuring secure installation.

The plate is designed for secure integration. The final waterproofing of the assembly will depend on the correct installation of the Axiom 9 Pro display itself with its own seals and adherence to the manufacturer's mounting instructions.