Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 7%

Raymarine

E70628

Ciklonasta antena 3' Raymarine Cyclone

L'antenne poutre Raymarine Cyclone 3' (E70628) est un composant pour les systèmes radar Raymarine Cyclone et Cyclone Pro. Conçue pour être associée aux embases E70620 ou E70621 et au module VCM100, elle complète les capacités Doppler de la série Cyclone, offrant une option compacte au sein de la gamme. Ce produit inclut uniquement l'antenne poutre de 3 pieds.

Public priceGet pro pricing

2.440,22€

2.440,22€ ~~2.634,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Višina izdelka	335 mm
Delovna napetost	12/24 V CC
Maksimalna poraba električne energije	170
Tehnologija radarja	CHIRP à compression d'impulsion avec Doppler
Maks. doseg radarja	72
Priporočena vrednost varovalke	20
Hitrost vrtenja radarja	12, 24, 36, 48, 60
Širina horizontalnega snopa	2.83
Vodotesno	IPX6
Tipična poraba električne energije	70
Spremenljivost širine pasu	60 MHz
Dolžina impulza	0.04 à 1.2 µs
Varnostna razdalja od kompasa	100
Hrupni faktor	< 5
Min. doseg radarja	6
Žično omrežje	RayNet (Ethernet)
Delovna temperatura	-25 à +55
Sledenje MARPA	Oui
Oddajna moč radarja	55
Radarska pasovna širina	Bande X
Vrsta antene/radoma	Open Array (poutre)
Širina izdelka	343 mm
Radarska Dopplerjeva tehnologija	Oui
Radar z dvojnim dosegom	Oui (via RangeFusion™)
VelocityTrack radarja	Oui
Širina vertikalnega snopa	25
Vrhovna moč radarske oddaje	55
Vsebina paketa	Antenne poutre 3 pieds
Na voljo alarmi	Zone de garde, CPA/TCPA (via ARPA)

Detailed description

Ciklonasta antena Raymarine Cyclone 3' (E70628) je namenjena novim radarjem. Je ključna sestavina serije Cyclone in se vgrajuje v embase Cyclone (E70620) ter Cyclone Pro (E70621). Za delovanje zahteva tudi pretvornik napetosti VCM100 (E70648). Ta 3-stopinjska antena je najkompaktnija v seriji Cyclone, ki vključuje tudi različice 4 in 6 stopinj, kar omogoča namestitev na plovila z omejenim prostorom za nameščanje.

Vgrajevanje in napredne funkcije

Ciklonasta antena 3' omogoča izkoriščanje vseh zmogljivosti radarjev Cyclone, vključno z Dopplerjevim obdelovanjem za identifikacijo premikajočih se ciljev in funkcijami ARPA za samodejno spremljanje, pod pogojem, da so nameščeni ustrezni multifunkcijski prikazovalniki in viri podatkov. Koncepcija izdelka upošteva varnostne standarde in standarde elektromagnetne združljivosti (v skladu z zahtevami za zdravje/varnost, EMC in uporabo radijskega spektra), kar zagotavlja skladnost z direktivo 2014/53/EU.

Tehnične specifikacije in namestitev

Antena meri 1080 mm v skupni dolžini in je namenjena nameščanju na os vrtenja embas Cyclone. Ima štiri montažne točke M10 z razmikom 70 mm in montažno površino 343 mm. Kabelski vodi morajo imeti minimalni polmer upogiba 52 mm, da se zagotovi integriteta povezav. Podrobne informacije o povezavah in specifikacijah so na voljo v navodilih za namestitev 87402 (Rev 8).

Documentation

Type	Nom
	EN - Plan technique - Antenne poutre Cyclone 3'
	EN - Notice d'installation - Antenne poutre Cyclone 3'
	FR - Notice d'installation - Antenne poutre Cyclone 3'
	EN - Declaration de conformite - Antenne poutre Cyclone 3'
	EN - Declaration de conformite - Antenne poutre Cyclone 3'
	EN - Gabarit de montage - Antenne poutre Cyclone 3'

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis of the Raymarine Cyclone 3' open-array antenna »

The Raymarine Cyclone 3' beam antenna is the relevant choice for medium-sized vessels or sailboats where space is a major consideration. Unlike closed radomes, this open antenna, even in its 3-foot version, offers superior target discrimination and increased angular resolution, essential for precise detection in dense traffic conditions or low visibility. Its integration into a Cyclone system provides access to Doppler functions that greatly facilitate threat identification and management of complex situations when approaching targets.

Installation requires a Cyclone or Cyclone Pro base and the VCM100 module, which means planning the location for these three components. The antenna is secured to the base with four M10 bolts. While aligning the heading line is a standard step for any radar, the procedure is documented and presents no particular difficulties for a qualified installer. It is crucial to respect the minimum cable bend radius to ensure the long-term reliability of the system. This antenna is particularly well-suited for coastal and offshore navigation where radar performance is critical but mast or arch space is limited, offering an optimal balance between compactness and advanced capabilities.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Ciklonasta antena 3' Raymarine Cyclone

2.440,22€

2.440,22€ ~~2.634,00€~~

Frequently asked questions

Need help? Contact us

What additional components are required to operate this antenna?

The Cyclone 3' (E70628) beam antenna requires essential Cyclone-series components to operate:

A Cyclone base (E70620) or Cyclone Pro (E70621).A VCM100 voltage converter module (E70648).

Is this antenna compatible with the Doppler radar function?

Yes, the Cyclone 3' beam antenna fully leverages the capabilities of Cyclone radars, including Doppler processing for identifying moving targets. Using this feature depends on the software requirements of compatible multifunction displays and the necessary data sources.

What are the mounting requirements for installing the antenna?

For installation of the Cyclone 3' beam antenna, the following mounting requirements apply:

It must be mounted at the rotation center of the Cyclone bases.It has 4 M10 mounting points.The spacing between these mounting points is 70 mm.The mounting area has a width of 343 mm.The routing of power and data cables must maintain a minimum bend radius of 52 mm to ensure connection integrity.

Is the Cyclone 3' beam antenna compliant with safety and electromagnetic standards?

Yes, the Cyclone 3' beam antenna is designed to meet safety and electromagnetic compatibility standards. Its design ensures compliance with Directive 2014/53/EU, covering health/safety requirements, EMC (ElectroMagnetic Compatibility), and radio spectrum usage.

Can ARPA features be used with this radar antenna?

Yes, the Cyclone 3' beam antenna allows ARPA (Automatic Radar Plotting Aid) features to be used for automatic target tracking. Activation of these features depends on the software requirements of compatible multifunction displays and the necessary data sources.

Is there any information about the warranty for this product?

The Raymarine Cyclone 3' whip antenna is covered by Raymarine's warranty policy. It is generally possible to register your product with the manufacturer to fully benefit from warranty services.

What is the minimum recommended bending radius for the antenna cables?

The minimum recommended bending radius for the Cyclone 3' beam antenna power and data cables is 52 mm. It is critical to adhere to this specification during installation to ensure connection integrity and proper equipment operation.