Kabel SeaTalk NG F / DeviceNet (NMEA 2000) F 1 meter

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 9%

Raymarine

A06075

Kabel SeaTalk NG F / DeviceNet (NMEA 2000) F 1 meter

The Raymarine A06075 1-meter adapter cable directly connects Raymarine’s proprietary SeaTalkng networks to NMEA 2000 (DeviceNet) equipment. Essential for integrating hybrid marine electronic systems, it ensures physical compatibility and reliable data transmission. This cable provides a simple and effective extension solution for existing architectures. The A06075 cable is supplied alone.

Public priceGet pro pricing

54,41€

54,41€ ~~60,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Vrsta konektorja	SeaTalkng Femelle, DeviceNet (NMEA 2000) Femelle
Vrsta kabla	Câble adaptateur
Dolžina kabla	1.0
Kompatibilna mreža	SeaTalkng, NMEA 2000
Žično omrežje	SeaTalkng,NMEA 2000
Delovna napetost	12 V
Delovna temperatura	-20°C à +70°C
Temperatura shranjevanja	-30°C à +80°C
Certifikati	CE,NMEA 2000
Tip izdelka	Accessoire de câblage
Kompatibilni modeli	Appareils Raymarine SeaTalkng, appareils NMEA 2000

Detailed description

Namenjen integraciji sistemov, 1 metrov kabel A06075 Raymarine SeaTalkng v DeviceNet (NMEA 2000) omogoča povezavo med napravami Raymarine, ki uporabljajo lastniški SeaTalkng vodilo, in standardnimi industrijskimi NMEA 2000 mrežami. Ta adaptacijski kabel zagotavlja bistveno medoperabilnost za mešane morske elektronske arhitekture, kar odpravlja potrebo po zapletenih vmesnikih za neposredne povezave naprav.

Medoperabilnost in povezanost morskih omrežij

SeaTalkng sistem Raymarine, ki temelji na arhitekturi hrbtenice in odcepa, je zasnovan za enostavno povezljivost. Medtem ko lahko določeni izdelki, kot so instrumenti ST70, zagotavljajo funkcijo mostu do starejšega SeaTalk(1), ta kabel A06075 ponuja neposredno pot za naprave, ki so v skladu z NMEA 2000 standardom. Razlikuje se od kablov hrbtenice (modri) ali odcepov (beli) po tem, da deluje kot adaptacijski kabel, ki omogoča dodajanje NMEA 2000 senzorjev ali zaslonov v obstoječo SeaTalkng mrežo. V dokumentaciji je posebej navedeno, da so na voljo adaptacijski kabli za povezavo NMEA 2000 izdelkov.

Enostavna integracija in namestitev

Namestitev kabla A06075 sledi splošnim smernicam Raymarine za SeaTalkng mreže, ki poudarjajo pomembnost pravilnih zaključkov na koncih hrbtenice. Njegova zasnova z majhnimi konektorji in barvnim kodiranjem (čeprav je ta kabel adaptacijski, SeaTalkng sistem uporablja modro za hrbtenico in belo za odcepe) pomaga preprečiti napake pri povezavi. V primerjavi z rešitvami, ki zahtevajo dražje protokolske pretvornike, ta kabel ponuja "vžemi in deluj" (plug-and-play) rešitev za fizično integracijo NMEA 2000 naprav, kot so Garmin ali B&G, v glavno SeaTalkng okolje Raymarine. Pomembno je poudariti, da ta kabel zagotavlja fizično povezavo in kompatibilnost podatkov tam, kjer si dva protokola delijo skupne PGN (Parameter Group Numbers), kar optimira razširitev sistema brez dodatnih stroškov.

Documentation

Type	Nom
	EN - Manuel d'utilisation - Câble 1 mètre SeaTalk NG F / DeviceNet (NMEA 2000) F)

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Raymarine A06075 adapter cable: Essential SeaTalkng to NMEA 2000 integration »

The Raymarine A06075 adapter cable is a key component for marine engineers or sailors looking to build a hybrid electronic system. It addresses the common issue of interconnecting Raymarine's proprietary SeaTalkng ecosystem with the open NMEA 2000 standard, which dominates the sensor and instrument market. Its utility lies in its ability to merge two worlds, allowing, for example, the addition of a third-party NMEA 2000 sensor (fishfinder, wind transducer) to a Raymarine SeaTalkng multifunction display, or vice versa, without requiring a complex and costly gateway for each peripheral device. This is the most direct solution for expanding an existing network with new equipment.

In terms of installation, this 1-meter cable is designed for simplicity. It plugs directly into a free port on the SeaTalkng network (via a T-connector or junction block) and into the DeviceNet port of an NMEA 2000 device. The key point is to ensure that the NMEA 2000 network is properly powered and terminated, as this cable does not provide power or termination. It is a pure data link. This type of cable is particularly suitable for installations where the goal is to minimize failure points and the complexity of active converters, for short distances between the two types of networks. It is ideal for a helm station where equipment is close together.

It is important to understand that this cable is a physical adapter. It does not resolve data incompatibility issues between specific PGNs that may exist between certain SeaTalkng and NMEA 2000 devices. For deeper protocol conversions or advanced diagnostics, dedicated gateways such as Actisense NMEA 2000 Gateway or other more sophisticated Raymarine interfaces would be required. This cable is a targeted and cost-effective solution for direct and seamless integration where data protocols are naturally compatible.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Kabel SeaTalk NG F / DeviceNet (NMEA 2000) F 1 meter

54,41€

54,41€ ~~60,00€~~

Frequently asked questions

Need help? Contact us

What is the Raymarine A06075 cable used for?

This Raymarine A06075 1-meter adapter cable is designed to directly connect Raymarine devices using the proprietary SeaTalkng bus to standard industry NMEA 2000 networks (also known as DeviceNet). It enables essential interoperability for mixed marine electronic architectures, facilitating the integration of NMEA 2000 devices into an existing SeaTalkng network.

What is the length of this SeaTalkng to NMEA 2000 adapter cable?

The length of this Raymarine A06075 adapter cable is 1 metre.

Does this cable allow connecting any NMEA 2000 device to a SeaTalkng network?

Yes, this adapter cable is specifically designed to connect NMEA 2000-compliant products to an existing SeaTalkng network. It enables the addition of NMEA 2000 sensors or displays to your Raymarine marine electronics setup, allowing direct communication between the two systems.

Is this cable compatible with older Raymarine SeaTalk(1) systems?

No, this adapter cable is designed for interconnection between SeaTalkng and NMEA 2000 systems. SeaTalk(1) systems are different proprietary buses and require specific products (such as certain ST70 instruments) to bridge to SeaTalkng via suitable adapter cables, but not directly with this A06075 cable.

What types of connectors does this cable have?

This cable is an adapter with female connectors for SeaTalkng and female connectors for DeviceNet (NMEA 2000). It uses small-diameter connectors to facilitate installation.

Do I need to use terminators with this adapter cable?

This cable is a spur or adapter to connect a device to the network. Terminators are essential and must be installed at both ends of the SeaTalkng backbone to ensure correct data transmission. The adapter itself does not replace the backbone terminators.

What is the difference between SeaTalkng and NMEA 2000?

SeaTalkng is a proprietary interconnect bus developed by Raymarine, based on a backbone and spur architecture, designed to simplify connectivity between their products.

NMEA 2000, also known as DeviceNet in some contexts, is an open industrial standard for communication between marine electronic instruments, enabling interoperability between equipment from different manufacturers.

This A06075 adapter cable bridges these two standards.

Can this cable power NMEA 2000 devices connected to a SeaTalkng network?

Yes, the SeaTalkng system, like NMEA 2000, is designed to carry both data and electrical power over the backbone. When an NMEA 2000 device is connected to a properly powered SeaTalkng network via this adapter, it will receive the required power from the network, provided the total system load does not exceed the permitted power limits.