Cable adaptateur Raymarine A80559 sonde CPT-S/DVS vers Element HV

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 7%

Raymarine

A80559

Kabel za prilagoditev sonde CPT-S/DVS (9-pin) na Element HV (15-pin)

Le câble d'adaptation Raymarine A80559 permet de connecter une sonde CPT-S ou CPT-DVS (9-pin) aux écrans multifonctions Element HV (15-pin), assurant la compatibilité et la réutilisation de vos transducteurs existants. Il offre une solution économique pour les mises à niveau de systèmes de navigation. Le produit inclut uniquement le câble adaptateur.

Public priceGet pro pricing

99,65€

99,65€ ~~108,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Vrsta konektorja	9 broches (sonde CPT-S/DVS) / 15 broches (Element HV)
Vrsta kabla	Câble adaptateur
Kompatibilna mreža	Sonar CHIRP
Žično omrežje	Raymarine Sonar propriétaire
Delovna napetost	12V CC
Delovna temperatura	-10 à +50°C
Temperatura shranjevanja	-20 à +70°C
IP razred	IPX7
Certifikati	CE
Tip izdelka	Câble adaptateur
Kompatibilni modeli	Sondes Raymarine CPT-S/DVS (9 broches); Écrans multifonctions Raymarine Element HV (15 broches)

Detailed description

Kabel Raymarine A80559 je namenjen zagotavljanju združljivosti med tradicionalnimi sonarnimi sondami CHIRP CPT-S/DVS (9-pin) in multifunkcijskimi prikazovalniki serije Element HV (15-pin). Ta tehnična rešitev omogoča uporabnikom blagovne znamke, da ponovno uporabijo svoje obstoječe pretvornike med nadgradnjo navigacijskega sistema, kar optimira investicijo v opremo.

Povezljivost in integracija sistemov Raymarine

Serija Element HV podjetja Raymarine, znana po svojih sonarnih sposobnostih HyperVision, uporablja specifične 15-pinske sonarne vtiče. V nasprotju z njimi uporabljajo sonde CPT-S in CPT-DVS, pogosto povezane s starejšimi generacijami prikazovalnikov Dragonfly ali drugimi MFD od Raymarine, 9-pinski vtič. Kabel A80559 zagotavlja električno in podatkovno povezavo med tema dvema standardoma, kar omogoča prikazovalnikom Element HV, da razumejo sonarne signale pretvornikov CPT-S/DVS. Sonde CPT-S, kot so prehodni modeli iz plastike ali brona (E70339, A80446, E70340, A80447, E70341, A80448, A80545), so pretvorniki Raymarine, ki so prepoznani po svoji robustnosti in zanesljivosti v morskih pogojih.

Tehnično pozicioniranje in uporabniška prednost

Ta prilagoditveni kabel Raymarine A80559 predstavlja strateško integrativno komponento. Preprečuje sistematično zamenjavo še delujoče sonde CPT-S/DVS ob nakupu prikazovalnika Element HV, s čimer zmanjšuje stroške in kompleksnost namestitve (vrtanje novih lukenj v trupu ali namestitev novih nosilcev za zadnjo desko). Medtem ko so prikazovalniki Element HV optimizirani za sonde HyperVision (ki niso vključene), uporaba sonde CPT-S/DVS prek tega kabla zagotavlja zanesljivo tradicionalno sonarno zmogljivost CHIRP. Ta pristop se razlikuje od popolne rešitve Element HV + HyperVision sonde, saj ponuja bolj postopen in ekonomičen način nadgradnje, ki je še posebej primeren za jadrničarje, ki želijo ohraniti del svoje obstoječe opreme, hkrati pa izkoristiti prednosti novih prikazovalnih platform.

Documentation

Type	Nom
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)

Expert review

Pol CONIN

Odgovorni digitalni delavec

« Integration of CPT-S/DVS transducers with Raymarine Element HV displays »

The Raymarine A80559 adapter cable is a pragmatic solution for recreational boaters planning an upgrade to the Element HV series while retaining their existing CPT-S or CPT-DVS transducer. Its purpose is to allow reuse of an expensive and often complex component to replace, such as a through-hull transducer, thereby avoiding additional hull work. It primarily targets boat owners equipped with Raymarine transducers from previous generations who do not wish to immediately invest in a new HyperVision transducer.

Installation of this cable is straightforward: it is a plug-and-play connection between the 9-pin connector of the CPT-S/DVS transducer and the 15-pin port of the Element HV display. This significantly simplifies integration and reduces vessel downtime. This approach differs from a complete solution with a dedicated HyperVision transducer by offering a cost-effective alternative. It is particularly relevant if the sonar capabilities of the CPT-S/DVS transducer are deemed sufficient for the user's primary needs, or if the budget does not allow for a full replacement.

It is critical to understand the limitations of this adapter: it ensures physical and electrical compatibility but does not convert a CPT-S transducer into a HyperVision transducer. To fully utilize the 1.2 MHz frequencies and the ultra-high-resolution imaging performance of HyperVision, a transducer dedicated to this technology is essential. The A80559 cable is therefore a functional bridge for traditional CHIRP technology, representing a transitional solution or a useful complement rather than a replacement for the native capabilities of Element HV displays.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Kabel za prilagoditev sonde CPT-S/DVS (9-pin) na Element HV (15-pin)

99,65€

99,65€ ~~108,00€~~

Frequently asked questions

Need help? Contact us

What is the Raymarine A80559 adapter cable used for?

The Raymarine A80559 adapter cable is designed to connect legacy CHIRP transducers of the CPT-S and CPT-DVS types (equipped with a 9-pin connector) to Element HV series multifunction displays (which use a 15-pin connector). It allows you to reuse your existing transducer when upgrading your navigation system.

Which Raymarine transducers are compatible with this A80559 cable?

This cable is compatible with Raymarine transducers equipped with a 9-pin connector, specifically models in the CPT-S series (for traditional CHIRP sonar) and CPT-DVS series (for DownVision and SideVision sonar). This includes transducers such as the CPT-100, CPT-110, CPT-120, as well as CPT-S models like references E70339, A80446, E70340, A80447, E70341, A80448, and A80545.

Which Raymarine multifunction displays is this cable compatible with?

The A80559 adapter cable is specifically designed for use with Raymarine Element HV series multifunction displays, which feature a 15-pin transducer connector.

Does this cable allow me to use HyperVision functions with my CPT-S/DVS transducer?

No. This adapter cable allows your Element HV display to use the traditional CHIRP sonar signals from your CPT-S transducer or the DownVision/SideVision signals from your CPT-DVS transducer. The advanced HyperVision functions on Element HV displays require specific HyperVision transducers, which are not included with this cable and are not supported by CPT-S/DVS transducers.

Is it difficult to install the A80559 adapter cable?

The A80559 adapter cable is designed for a simple and direct plug-and-play connection between your existing transducer and your new Element HV display. Simply connect the 9-pin end to your CPT-S/DVS transducer and the 15-pin end to your Element HV display. The cable itself requires no special tools for installation, but accessing the connectors on the transducer and display may vary depending on your boat's setup.

What is the advantage of using this adapter cable instead of buying a new depth sounder?

The main advantage of this cable is that it lets you keep and reuse your existing Raymarine CPT-S or CPT-DVS depth sounder when upgrading to an Element HV display. This saves a significant amount of money by avoiding the purchase of a new depth sounder and simplifies installation by eliminating the need to drill new holes in the hull or modify the transom mount for a new depth sounder.

Is this cable compatible with CPT-DV transducers or older DownVision/SideVision transducers (CPT-100/110/120)?

Yes, this cable is compatible with Raymarine CPT-DV transducers and older DownVision/SideVision transducers such as the CPT-100, CPT-110, and CPT-120. All these transducers use a 9-pin connector, making them adaptable to Element HV displays (15-pin) via cable A80559.