Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 9%

Raymarine

A06045

Kabel SeaTalk NG / Devicenet NMEA2000, ženski (400 mm)

Le câble Raymarine A06045 est un adaptateur de 400 mm conçu pour intégrer les appareils NMEA2000 (connecteur femelle DeviceNet) à un réseau SeaTalkng. Essentiel pour la connectivité inter-systèmes, il permet d'étendre votre réseau Raymarine avec des capteurs ou écrans compatibles NMEA2000. Faisant partie de la gamme de câblage SeaTalkng, il assure une interopérabilité sans faille. Ce produit inclut uniquement le câble adaptateur A06045.

Public priceGet pro pricing

48,96€

48,96€ ~~54,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Vrsta konektorja	SeaTalkng mâle vers DeviceNet NMEA2000 femelle
Vrsta kabla	Câble adaptateur
Dolžina kabla	0.4
Kompatibilna mreža	SeaTalkng, NMEA2000
Žično omrežje	SeaTalkng,NMEA2000
Delovna napetost	12 V DC
Delovna temperatura	-20°C à +60°C
Temperatura shranjevanja	-25°C à +70°C
Certifikati	CE,NMEA 2000
Tip izdelka	Câble adaptateur
Kompatibilni modeli	Appareils Raymarine SeaTalkng et appareils tiers NMEA2000

Detailed description

Kabel Raymarine A06045 je bistvena povezovalna rešitev za sisteme morske navigacije, ki olajša komunikacijo med omrežjem SeaTalkng in napravami, ki so združljive z NMEA2000. Z dolžino 400 mm je ta kabel-adaptor namenjen predvsem kratkim povezavam, saj ima na enem koncu ženski DeviceNet NMEA2000 vtič in na drugem standardni SeaTalkng vtič.

Vključevanje in združljivost omrežja

Ta kabel-adaptor omogoča povezavo tretjih NMEA2000 naprav na lastniško SeaTalkng vodilo Raymarine. Za razliko od klasičnih SeaTalkng odcepnih kablov (spurs) ali glavnega vodila (backbone), ki povezujejo izključno originalne Raymarine komponente, je A06045 namenjen razširitvi omrežja do naprav, ki ustrezajo standardu NMEA2000. Vključen je v strategijo Raymarine, ki ponuja razširjeno povezljivost, podobno kot mostovi (bridges), ki so vgrajeni v nekatera orodja ST70 za starejše sisteme SeaTalk(1).

Tehnične in montažne specifikacije

SeaTalkng sistem temelji na vodilni arhitekturi z glavnim vodilom (backbone) in odcepnimi kabli (spurs) za posamezne izdelke. Kabel A06045 deluje kot odcepni kabel-adaptor, ki se priključi na T-komponento ali SeaTalkng razdelilnik. Njegova zasnova z majhnimi vtiči in barvnim kodiranjem (modra za backbone, bela za spurs, rdeča traka za napajanje) olajša montažo in zmanjšuje možnost napak pri povezavi. Uporaba tega kabla je ključna v mešanih konfiguracijah, kjer je potrebna fleksibilnost integracije NMEA2000, kar dopolnjuje ponudbo standardnih SeaTalkng kablov različnih dolžin, ki jih ponuja Raymarine.

Documentation

Type	Nom
	EN - Manuel d'utilisation - Câble SeaTalk NG / Devicenet NMEA2000 femelle (400mm)

Expert review

Pol CONIN

Odgovorni digitalni delavec

« Essential NMEA2000 connectivity for SeaTalkng network »

The A06045 cable is a critical component for integrators and users looking to maximize the flexibility of their navigation network. Its primary utility lies in its ability to bridge Raymarine's proprietary SeaTalkng ecosystem with the open NMEA2000 (DeviceNet) architecture. For a cruising sailboat or a powerboat equipped with a SeaTalkng network, this cable becomes essential if you wish to add a specific sensor, a multifunction display, or any other device from a different brand but NMEA2000-compatible.

In terms of installation, its 400 mm length is designed for short connections, typically between a SeaTalkng T-piece and a nearby NMEA2000 device. It is crucial to plan the equipment layout carefully to ensure this length is sufficient, or to use standard NMEA2000 extension cables if needed. The advantage is a clean, direct installation for adjacent devices. This cable differs from standard SeaTalkng "spur" cables, which are dedicated to native Raymarine devices, by providing a direct gateway to the NMEA2000 standard without requiring an external protocol converter for raw data.

It is important to note that this cable provides physical connectivity and NMEA2000 message transport over the SeaTalkng bus; compatibility of specific messages between connected devices depends on each device's capabilities. It is not a data converter but a physical connector adapter. It is therefore ideal for systems where a simple, direct physical integration of an NMEA2000 component into an existing SeaTalkng network is desired, without added complexity.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Kabel SeaTalk NG / Devicenet NMEA2000, ženski (400 mm)

48,96€

48,96€ ~~54,00€~~

Frequently asked questions

Need help? Contact us

What is the Raymarine A06045 cable and what is it used for?

The Raymarine A06045 cable is an adapter designed to connect third-party NMEA2000-compatible devices to Raymarine's proprietary SeaTalkng network. It enables communication between these two marine data bus standards.

What is the length of this A06045 adapter cable?

This Raymarine A06045 adapter cable has a length of 400 mm.

What types of connectors are on cable A06045?

Cable A06045 is fitted with a standard SeaTalkng connector at one end and a female DeviceNet NMEA2000 connector at the other.

Is the A06045 cable a SeaTalkng spur cable or a backbone cable?

The A06045 cable is a SeaTalkng spur adapter cable. It is designed to connect to a SeaTalkng T-piece or junction block, allowing an NMEA 2000 device to tap into the SeaTalkng backbone.

Is this A06045 cable compatible with NMEA2000 equipment from other manufacturers?

Yes, this cable is designed to connect third-party NMEA2000 devices to Raymarine’s proprietary SeaTalkng bus. It uses the standard female DeviceNet NMEA2000 connector, ensuring compatibility with NMEA2000 devices compliant with the standard.

Can I use this cable to connect SeaTalk(1) products to my SeaTalkng network?

No, this A06045 cable is specifically designed to connect NMEA 2000 devices to a SeaTalkng network. To connect SeaTalk(1) products to a SeaTalkng network, specific SeaTalk(1) adapter cables and Raymarine products with a bridge function (such as certain ST70 instruments) are required.

How to install cable A06045 in a SeaTalkng system?

The A06045 cable is a drop cable. To install it, you must connect it to a T-piece (T-connector) or to a SeaTalkng junction block that is part of the main backbone of your SeaTalkng network. The other end of the cable will connect to your NMEA 2000 compatible device.

Is it necessary to use terminators with this A06045 adapter cable?

The A06045 cable itself is not a terminator. However, it is imperative that the main backbone of your SeaTalkng system is properly terminated. Two terminators must be installed, one at each end of the main backbone, to ensure correct data transmission. This cable connects to the already terminated backbone.