Sonde traversante plastique bâbord 12° HV-300 HyperVision

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 11%

Raymarine

R70725

Plastična prečna sonda levo 12° HV-300 HyperVision

La sonde traversante plastique bâbord 12° HV-300 HyperVision Raymarine (R70725) est conçue pour une imagerie sonar détaillée avec les technologies DownVision, SideVision et RealVision. Idéale pour les coques planantes avec un dièdre de 8 à 16 degrés, elle offre une performance stable à haute vitesse grâce à son installation traversante. Ce modèle bâbord est complémentaire à la version tribord (R70726) pour une intégration optimale.

Public priceGet pro pricing

366,10€

366,10€ ~~414,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Podprte sonar tehnologije	HyperVision, DownVision, SideVision, RealVision 3D, CHIRP Conique Haute Fréquence
Frekvence sonarja	1.2 MHz, 350 kHz, 200 kHz
Maksimalna globina merjenja	274.0
Material sondne sonde	Plastique
Tip konektorja za sonar	25 broches RealVision
Vgrajen senzor temperature	Oui
Združljivi prikazovalniki	Raymarine Axiom, Axiom+, Axiom Pro, Element HV
IP razred	IPX8
Tip montaže	Traversante
Certifikati	Directive CEM 2014/30/UE
Območje merjenja temperature	-2°C à +55°C
Visoka frekvenca CHIRP	1200 kHz
Nizka frekvenca CHIRP	200 kHz
Vrsta ribolova	Pêche générale, détection de structures
Vgrajen senzor hitrosti	Non
Leto izdaje	2019.0
Raven uporabnika	Intermédiaire (fonctions avancées)

Detailed description

Namenjena naprednim sonarjem Raymarine, plastična prečna sonda levo 12° HV-300 HyperVision, referenčna številka R70725, ponuja rešitev za podvodno detekcijo na plovilih s planajočo trulo. Ta sonda uporablja tehnologijo HyperVision™ od Raymarine, ki omogoča podrobno slikanje morskega dna in podvodnih struktur. Je posebno prilagojena za namestitev na levi strani plovila z korekcijskim kotom 12°, ki kompenzira dihedral trule.

Pozicioniranje in tehnologija HyperVision™

Sonda HV-300 HyperVision se razlikuje od modelov zadaj na krmi, kot je HV-100, po prečni namestitvi, ki zagotavlja optimalno delovanje pri visokih hitrostih in minimalno izpostavljenost turbulencam. Model R70725 je levi (HV-300THP-P), ki dopolnjuje desni model (HV-300THP-S, R70726), kar omogoča fleksibilnost pri namestitvi za prilagoditev konfiguraciji trule in preprečitev vpliva na dodatke ali vijake. Tehnologija HyperVision™ vključuje funkcije DownVision, SideVision in RealVision, ki zagotavljajo sonarje z izboljšano jasnostjo za identifikacijo rib in struktur. Izdelek je v skladu z direktivo EMC 2014/30/EU.

Priporočila za namestitev in vzdrževanje

Za namestitev sonde HV-300 je potrebno uporabiti mavec iz poliuretana z nevtralno polimerizacijo morske kakovosti, izključujoč mastike na osnovi acetata ali silikona, ki lahko poškodujejo plastične sestavine. Za vzdrževanje je priporočljivo uporabiti protignilno barvo na vodni osnovi, izključujoč barve na osnovi ketona ali bakra, ki lahko vplivajo na delovanje ali garancijo. Sondo je nujno preizkusiti in uporabljati le, ko je plovilo v vodi, da se prepreči pregrevanje. Priporočljiva je namestitev, certificirana s strani strokovnjaka, ki je pooblaščen s strani Raymarine, za podaljšanje garancije na izdelek.

Documentation

Type	Nom
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	FR - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Gabarit de montage - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Gabarit de montage - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	FR - Notice d'installation - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Gabarit de montage - Sonde traversante plastique bâbord 12° HV-300 HyperVision
	EN - Gabarit de montage - Sonde traversante plastique bâbord 12° HV-300 HyperVision

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis of the Raymarine HV-300 starboard-through hull transducer at 12° offset »

The Raymarine HV-300 HyperVision through-hull transducer with a 12° port-side offset (R70725) is a technically sound choice for owners of planing-hull vessels where the deadrise at the chosen location is around 8 to 16 degrees. Unlike the transom-mounted HV-100 series, this through-hull configuration reduces drag and ensures laminar water flow around the transducer element, which is critical for maintaining HyperVision sonar image quality at higher speeds. The port-side position is often preferred on monohulls or catamarans to avoid disturbances generated by the main propeller or other hull appendages.

Installing this type of transducer requires significant expertise, including hull fairing, drilling, and flawless waterproofing. A fairing block may be necessary to optimize angle and performance if the actual deadrise deviates slightly from the built-in 12°. It is essential to strictly follow Raymarine’s recommendations for sealants (neutral polyurethane) and antifoulings (water-based) to ensure installation longevity and warranty validity. Poor transducer location selection can cause turbulence, degrading sonar returns—especially in SideVision mode. For high-deadrise hulls or specific applications, assess whether a model with a different compensation angle or a custom fairing block would be more suitable.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Plastična prečna sonda levo 12° HV-300 HyperVision

366,10€

366,10€ ~~414,00€~~

Frequently asked questions

Need help? Contact us

What is the Raymarine HV-300 HyperVision through-hull transducer?

The HV-300 HyperVision is a plastic through-hull transducer designed for installation on the port side of the vessel, with a 12° angle correction to compensate for hull deadrise. It uses Raymarine's HyperVision™ technology, which integrates DownVision, SideVision, and RealVision functions, providing detailed imaging of the seabed and underwater structures. This installation type ensures optimal performance at high speed with minimal exposure to turbulence.

What type of sealant should I use to install the HV-300 transducer?

For installing the HV-300 transducer, you must use only a neutral-cure polyurethane sealant of marine grade. It is critical not to use sealants containing acetate or silicone, as they could damage the plastic components of the transducer.

Can I apply any antifouling paint to the HV-300 depth sounder?

No, you cannot use any antifouling paint. It is recommended to apply only water-based antifouling paint on the HV-300 depth sounder. Avoid ketone-based or copper-based paints, as they may affect the depth sounder's performance or void the warranty.

Is it possible to test or use the HV-300 depth sounder out of the water?

No, the HV-300 depth sounder must be tested and used only when the vessel is in the water. Operating the sounder out of the water may cause overheating and damage the unit.

What is the difference between the HV-300 and HV-100 depth sounders?

The main difference lies in their installation method:

The HV-300 is a thru-hull depth sounder, designed to be installed through the vessel's hull. This installation provides optimal performance at high speeds and minimal exposure to turbulence.The HV-100 is a transom-mount depth sounder, designed to be attached to the back of the vessel's transom.Both depth sounders use HyperVision™ technology for sonar imaging.

Which Raymarine multifunction displays are compatible with the HV-300 HyperVision transducer?

The HV-300 HyperVision transducer is primarily compatible with Raymarine Element HV series multifunction displays. These displays are designed to fully leverage HyperVision™ technology and provide detailed sonar imagery.

What does "port 12°" mean in the HV-300 depth sounder designation?

The designation "port 12°" indicates two key features:

Port: The depth sounder is specifically designed to be installed on the left side of the vessel (port side). 12°: The transducer includes a 12° correction angle to compensate for the deadrise angle (the V-shaped hull angle) of the boat. This ensures the fishfinder’s beam is directed vertically toward the seabed, providing accurate and optimal readings.

What are the recommendations for choosing the installation location for the HV-300 through-hull transducer?

To ensure optimal performance of the HV-300 transducer, it is essential to choose an appropriate installation location. Key recommendations:

Select a spot where the water flow is smooth and undisturbed by hull appendages (propellers, keels, strakes, etc.). Avoid areas prone to turbulence or air bubbles, which can degrade sonar signal quality. Ensure the location is away from any electrical interference sources. The location must be accessible for installation, maintenance, and cleaning of the transducer.