Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 3%

Raymarine

A80703

Sonda za mizo RVM-100 RealVision 3D, neposredna povezava na AXIOM2 Pro in RVM1600 (kabel 8 m)

La sonde tableau Raymarine RVM-100 RealVision 3D (A80703) offre une imagerie sonar avancée avec des vues 3D, DownVision et SideVision. Conçue pour une connexion directe aux écrans AXIOM2 Pro et aux modules RVM1600, elle simplifie l'intégration du système. Le produit inclut la sonde RVM-100 avec un câble de 8 mètres.

Public priceGet pro pricing

687,71€

687,71€ ~~714,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Podprte sonar tehnologije	RealVision Max 3D, DownVision, SideVision, CHIRP large spectre
Delovna napetost	12V DC
Frekvence sonarja	CHIRP conique haute fréquence (200 kHz ± 5%), RealVision 3D (350 kHz ± 5%), SideVision (350 kHz ± 5%), DownVision (350 kHz ± 5%)
Delovna temperatura	-20°C à +70°C
Maksimalna globina merjenja	365.0
Material sondne sonde	Plastique
Tip konektorja za sonar	25 broches RealVision
Dolžina kabla	8.0
Vgrajen senzor temperature	Oui
Združljivi prikazovalniki	Axiom, Axiom+, Axiom Pro, Axiom XL, Axiom 2 Pro, Axiom 2 XL, RVX1000, RVM1600
IP razred	IPx6, IPx7, IPx8
Tip montaže	Tableau arrière
Certifikati	EN 60945:2002, IEC 28846:1993, EMC Directive 2014/30/EU, C-Tick (Australie et Nouvelle-Zélande)
Kot prekrivanja snopa	CHIRP conique: 12° (200 kHz), 3D/SideVision: 180°
Visoka frekvenca CHIRP	200 kHz
Vrsta ribolova	Pêche générale, Pêche de structure
Vgrajen senzor hitrosti	Non

Detailed description

Sonda za mizo RVM-100 RealVision 3D (Raymarine, referenca A80703) je zasnovana za neposredno integracijo z multifunkcijskimi zasloni AXIOM2 Pro in sonarnimi moduli RVM1600. Omogoča napredno slikovno predstavitev s sonarjem, ki omogoča uporabnikom pregledavanje podvodnih struktur in ribjih jate v 3D prikazu morskega dna, kar dopolnjuje tradicionalne poglede DownVision in SideVision.

Napredna sonar tehnologija in enostavna integracija

Sonda RVM-100 uporablja RealVision 3D tehnologijo, ki se razlikuje od 2D CHIRP sonde ali starejših modelov, kot je serija CPT (samo DownVision/SideVision), saj lahko ustvari volumetrični prikaz morskega dna. Ta funkcija zagotavlja boljšo prostorsko razumevanje podvodnega okolja. Neposredna povezava na enote AXIOM2 Pro, ki imajo vgrajeno RealVision sonar, ali na zunanji modul RVM1600, poenostavlja namestitev tako, da ni potrebno uporabljati dodatnih črnih sonar sklopov za združljive konfiguracije. Vključen kabel dolžine 8 metrov olajšuje namestitev na krmi različnih tipov plovil.

Pozicioniranje in združljivost

RVM-100 je del serije RealVision transduktorjev Raymarine in predstavlja rešitev za namestitev na krmi za moderne navigacijske sisteme. Optimizirana je za delovanje s programsko opremo LightHouse 4 (v dokumentaciji omenjena različica v4.10.149), kar zagotavlja združljivost z zasloni Axiom, Axiom+, Axiom Pro, Axiom XL in Axiom 2 XL. V primerjavi s transduktorji serije RVM-400, ki se nameščajo skozi trup, ponuja RVM-100 bolj dostopen in manj vdirajoč način namestitve za plovila, kjer je prebadanje trupa nezaželeno, hkrati pa ohranja 3D RealVision slikovne sposobnosti. Podpora kalibraciji AHRS (sistem za referenco smeri in nagiba) omogoča optimizacijo kakovosti 3D slike tako, da kompenzira gibanje čolna.

Documentation

Type	Nom
	FR - Manuel d'utilisation - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)
	EN - Plan technique - Sonde Tableau RVM-100 RealVision 3D , branchement direct AXIOM2 Pro et RVM1600 (Câble 8m)

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis of the Raymarine RVM-100 RealVision 3D flush-mount transducer »

The Raymarine RVM-100 RealVision 3D flush-mount transducer (A80703) is a key component for recreational boaters and anglers seeking detailed underwater visualization without the complexity of a through-hull installation. Its practical value lies in its ability to deliver RealVision 3D, DownVision, and SideVision imagery directly integrated with Axiom 2 Pro MFDs or via the RVM1600 module. This approach significantly simplifies system architecture by reducing the number of external boxes, a notable advantage for mid-sized boats where space is often limited and wiring simplification is critical.

For installation, rear-deck mounting is generally faster and less expensive than a through-hull setup. The 8-meter cable supplied is sufficient for most boats under 10–12 meters, but an extension may be required for larger vessels or complex installations. It is crucial to select a rear-deck location that minimizes water turbulence to ensure optimal image quality, particularly at high speeds. The AHRS calibration is a mandatory post-installation step to ensure the accuracy of 3D representations by compensating for the boat's pitch and roll.

The RVM-100 stands out from conventional transducers with its native 3D imaging, providing a unique perspective for identifying structures and fish schools. It is particularly well-suited to sportfishing boats or coastal cruisers where precise knowledge of underwater topography is an asset. However, for offshore applications or boats operating at very high speeds, a through-hull transducer from the RVM-400 series may offer better performance and water stability.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda za mizo RVM-100 RealVision 3D, neposredna povezava na AXIOM2 Pro in RVM1600 (kabel 8 m)

687,71€

687,71€ ~~714,00€~~

Frequently asked questions

Need help? Contact us

Which sonar technology does the Raymarine RVM-100 RealVision 3D transducer use?

The RVM-100 transducer integrates RealVision 3D technology, providing a three-dimensional representation of the seabed. It also complements traditional DownVision and SideVision views, as well as high-frequency CHIRP sonar for precise target detection.

Which Raymarine multifunction displays is the RVM-100 transducer compatible with?

The RVM-100 transducer is compatible with Raymarine multifunction displays from the following series:

AxiomAxiom+Axiom ProAxiom XL Axiom 2 XLAXIOM2 ProIt is optimized to operate with LightHouse 4 software (recommended version v4.10.149 or later).

How does the RVM-100 transducer connect to my Raymarine navigation system?

The RVM-100 transducer is designed for direct connection. It connects directly to AXIOM2 Pro multifunction displays, which have integrated RealVision sonar capabilities. For other compatible Axiom displays, the transducer connects directly to the RVM1600 external sounder module.

What is the mounting type for the RVM-100 RealVision 3D transducer?

The RVM-100 is a transom-mount transducer. This mounting type is a non-invasive option for vessels where hull drilling is to be avoided, while retaining RealVision 3D imaging capabilities.

What is the length of the cable supplied with the RVM-100 depth sounder?

The RVM-100 depth sounder is supplied with an 8-metre cable. This length is designed to facilitate installation on the transom of various types of vessels.

Does the RVM-100 transducer require an external sounder module (black box)?

No, the RVM-100 transducer does not require an additional black-box sonar module if connected to an Axiom2 Pro multifunction display, as these units already include RealVision sonar capabilities. If using another compatible Axiom display, the transducer connects directly to the external RVM1600 sounder module.

Does the RVM-100 transducer support AHRS calibration?

Yes, the RVM-100 transducer supports AHRS (Attitude and Heading Reference System) calibration for RealVision technology. This calibration is critical for stabilizing sonar imagery and compensating for boat motion, providing a more accurate representation of the seabed.

What are the main imaging capabilities offered by the RVM-100 RealVision 3D transducer?

The RVM-100 RealVision 3D transducer provides several advanced imaging capabilities for a better understanding of the underwater environment:

RealVision 3D: Generates a volumetric 3D image of the seabed, structures, and fish schools.
DownVision: Provides a detailed view beneath the boat, similar to a photographic image.
SideVision: Offers a side view of structures and fish on either side of the boat.
High-frequency CHIRP sonar: Enables precise target detection and excellent separation.