Capteur Trifonctions Sondeur/Loch et Température

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 13%

Raymarine

T910

Senzor za tri funkcije: eholot, hitrostomer in temperatura

Le Raymarine T910 est un émetteur de coque conçu pour traiter les données de profondeur, vitesse et température d'un triducer, s'intégrant au système 12/24Vdc du bateau. Cette unité est essentielle pour centraliser et transmettre ces informations de navigation. Inclus : vis auto-foreuses et gabarit de montage.

Public priceGet pro pricing

217,46€

217,46€ ~~252,00€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Delovna napetost	12/24 V
Širina izdelka	47 mm
Višina izdelka	52.5 mm
Globina izdelka	42.5
Združljivost z vodilo	NMEA 2000
Žično omrežje	NMEA 2000
Tip montaže	Montage en surface
Samozapirajoči ventil	Non
Vgradni	Non
Lokacija nameščenega izdelka	Intérieur, au-dessus de la ligne de flottaison, ventilé
Kalibracija hitrosti plovila	Via système de navigation connecté
Meritev temperature	Oui
Vrsta izhoda senzorja	Numérique (NMEA 2000)
Vrsta senzorja	Interface de capteur multifonction

Detailed description

Emitnik Raymarine T910 je namenjen upravljanju podatkov iz senzorja za tri funkcije (triducer), ki meri globino, hitrost in temperaturo. Ta enota deluje kot vmesnik med triducerjem in navigacijskim sistemom plovila ter združuje te tri bistvene parametre za natančno spremljanje. Je združljiv z napajanjem 12/24Vdc na krovu in ga je mogoče napajati tudi s sončnim panelom Raymarine v primeru odsotnosti namenskega vira energije.

Namestitev in povezanost T910

Namestitev Raymarine T910 zahteva strateško lokacijo na krovu. Enota mora biti nameščena navpično, s kablovskimi vhodi na dnu, in zagotovo vsaj 50 cm nad vodno črto. Je bistveno izogibati se neposrednega stika z vodo in izbrati dobro prezračevano območje, izključujoč zaprte vodotesne prostore. Namestitev poteka z uporabo treh lukenj 2,5 mm in samoreznih vijakov, ki jih dobavimo, z opozorilom, da vijake ne smemo preveč zategniti, da ne bi poškodovali ohišja.

Podrobnosti o kabliranju in integraciji

Vključitev kablov transduktorja v Raymarine T910 mora slediti specifični barvni kodi. Za triducer mora biti ohišje mase priključenega na konektor globine in ne na tistega za hitrost, da se izognejo kratkim stikom. Če senzor za hitrost nima vgrajenega temperaturnega sondiranja, je potrebno povezati rjavo in belo žico konektorja za hitrost, da se zagotovi kontinuiteto signala. Priporočljiva je uporaba silikonske maščobe na priključkih za optimizacijo povezave ter podpora kablov v bližini emitnika. Končno mora biti pokrov pravilno nameščen, da se zunanji plašči kablov zadržijo znotraj emitnika, kar zagotavlja ustrezno zaščito celotnega kabliranja.

Documentation

Type	Nom
	EN - Gabarit de montage - Capteur Trifonctions Sondeur/Loch et Température
	EN - Notice d'installation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Raymarine T910 interface: reliable management of triducer data »

The Raymarine T910 is a hull-mounted transmitter essential for vessels requiring reliable centralization of core navigation data: depth, speed, and temperature. This module is not the sensor itself but the electronic interface that receives and processes signals from an external triducer. Its practical value lies in converting raw sensor data into usable information for the onboard electronic system, often for integration into an NMEA or SeaTalkNG network, with NMEA output protocol specifically referenced in the technical documentation.

Installing the T910 requires consideration. As a hull-mounted transmitter, it is installed inside the vessel, simplifying maintenance and avoiding additional hull penetrations compared to a through-hull transducer. However, this imposes specific constraints: vertical mounting, more than 50 cm above the waterline, and in a ventilated space away from direct moisture. These requirements are critical to ensure longevity and signal reliability. Installers must pay close attention to transducer wiring, particularly grounding the shield to the depth connector for triducers, and bridging the brown and white terminals if the speed sensor lacks a temperature probe. These details are decisive for proper operation and system integrity.

This type of interface is particularly relevant for owners looking to modernize or improve the reliability of their navigation data acquisition without replacing all their sensors. It serves as a key component for converting and transmitting basic data, often a prerequisite for display on multifunction instruments or dedicated screens. It is not suitable for direct exposure to the elements or installation in sealed compartments that would prevent necessary ventilation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Senzor za tri funkcije: eholot, hitrostomer in temperatura

217,46€

217,46€ ~~252,00€~~

Frequently asked questions

Need help? Contact us

What are the prerequisites for drilling the mounting holes for the T910?

You must drill three 2.5 mm holes. These holes are marked "B" on the mounting template provided with the unit.

Which screws should be used to mount the T910 and are there any precautions?

The T910 must be mounted using the self-tapping screws provided. It is very important not to overtighten the screws, as this could damage the housing molding.

How to connect the transducer cables to the T910?

Connect the transducer cables to the Raymarine T910 following the unit’s specific color code. Insulate the shields to prevent short circuits.

How to connect the ground braid of a triducer to the T910?

For a triducer, the ground braid MUST be connected to the depth connector, not the speed connector. This prevents short circuits and ensures proper operation.

What to do if my speed sensor has no integrated temperature probe?

If your speed sensor does not include a temperature probe, you must connect the brown and white wires of the speed connector. This connection ensures signal continuity.

Should a product be applied to the T910 connection terminals?

Yes, it is recommended to apply silicone grease to the connection terminals to optimize connection quality and protect them.

How to properly manage cables after connection to the T910?

It is recommended to support the cables near the transmitter. Additionally, the unit's cover must be correctly positioned to keep the outer cable sleeves inside the transmitter, ensuring their secure attachment and protection.

How to check that the T910 cover is correctly installed?

Ensure the cover is properly seated and locks the outer sheaths of the cables inside the transmitter housing. This ensures connection protection and the longevity of the installation.

Is the T910 compatible with all types of transducers?

The Raymarine T910 is specifically designed to be used with a trifunction transducer (triducer) measuring depth, speed, and temperature. Its compatibility will therefore depend on the type of triducer you own.

Can the T910 be used with older transducers?

Yes, the T910 can potentially be used with older transducers. However, it is advisable to carefully check the connections, especially if the speed sensor does not have an integrated temperature probe, in which case a link between the brown and white terminals of the speed connector will be required.

What types of data can the T910 process?

The T910 is designed to process and interface depth, speed (log) and temperature data. These three types of measurements are consolidated by the unit for your navigation system.

Can incorrect installation of the T910 affect the warranty?

Yes, failure to follow the installation instructions provided with the Raymarine T910 may void your warranty. It is therefore essential to strictly adhere to all guidelines for installation and wiring.