Prehodnik za vtičnik do Ø40 mm, kabel 12-15 mm - črni kompozit

This Scanstrut DS40-P-BLK deck gland is designed to accommodate connectors with a diameter up to 40 mm.

This deck gland is specifically suitable for cables with a diameter between 12 and 15 mm.

The Scanstrut DS40-P-BLK deck gland is made of black composite, providing good resistance in marine environments while remaining lightweight.

For installing this deck gland, you will need the following tools:

A Pozidriv screwdriver
Silicone sealant
A 40 mm hole saw
A 2.5 mm or 3 mm drill bit (depending on the hardness of your mounting surface)

The DS40-P-BLK is the black composite (plastic) version, which is a lightweight and economical alternative. The DS40-S, on the other hand, is the version made of stainless steel, offering different robustness and finish.

The main difference lies in their capacity and hole size. The DS40 is designed for connectors up to Ø40 mm and cables from 12-15 mm, requiring a Ø40 mm hole. The DS30 is suitable for cables from 9-14 mm and requires a Ø30 mm hole.

Four No. 6 x 16 self-tapping screws are included in the kit for mounting the deck gland to your bracket.

Yes, applying silicone is essential to ensure a perfect seal around the drilled hole and under the deck gland base, thus protecting the interior of your vessel from water.

The drill bit diameter for pilot holes depends on the material of your support:

For soft materials (e.g., plywood): use a 2.5 mm (3/32 inch) drill bit.

Yes, the Scanstrut DS40-P-BLK is a waterproof deck gland, specifically designed to provide reliable water protection for cable penetrations through boat decks.

Yes, this deck gland is designed for vertical installation, making it ideal for cable runs through decks or vertical bulkheads on your vessel.

The black M4X10 bolt is a key component for deck-penetration assembly, securing the hull to the base and ensuring structural integrity.

Yes, the Scanstrut DS40-P-BLK is a marine-grade product specifically designed to withstand demanding marine environments, thanks to its black composite construction.

To ensure optimal watertightness, it is essential to apply marine-grade silicone around the drilled hole and under the through-hull fitting base before securing it with the provided screws. Ensure all surfaces are clean and dry before application.

Yes, the Scanstrut DS40-P-BLK deck gland is supplied with detailed installation instructions to guide you step-by-step through the assembly process.

This deck gland is optimized for cables with a diameter of 12 to 15 mm. For cables with a smaller diameter, it would be more appropriate to consider a different Scanstrut model, such as the DS30, which is designed for 9–14 mm cables, to ensure optimal waterproofing and compatibility.