Set ROKK Mini - Držalo za pametne telefone za ravno montiranje

The ROKK Mini Kit is designed to accommodate smartphones with a width between 45 mm and 95 mm (1.77 to 3.74 inches). This wide compatibility range allows most models on the market to be mounted, with or without a protective case. The ratchet clamp adjusts easily to your device's thickness.

Yes, the ROKK Mini accepts smartphones up to 95 mm wide. If your phone with its case does not exceed this width, it can be installed without issue. The ratchet clamp and rubber anti-slip coating ensure secure hold even with a thick case.

The ROKK Mini mount can support a maximum load of 1.2 kg (2.65 lbs). This capacity is more than sufficient for all smartphones on the market, including heavy models such as foldable phones or rugged devices.

For installation, you will need:

A 2.5 mm (3/32 inch) drill bit to pre-drill the holesA Pozidriv screwdriver to screw in the baseMarine-grade sealant (recommended for a watertight marine installation)A 5 mm Allen key to secure the mount body to the baseThese tools are not included in the kit.

Yes, the ROKK Mini offers 360° rotation. You can position your smartphone in any orientation—portrait or landscape—for optimal visibility while sailing.

Yes, this mount is designed by Scanstrut, a brand specializing in marine equipment. It withstands harsh conditions in a nautical environment: vibrations, spray, UV, and temperature variations. The screw-mounted fixture provides solid mechanical hold, ideal for motorboats or sailboats.

This specific model (ref. RLS-509-401) comes with a screw-down base (RLS-401) and four self-tapping screws. It is not the adhesive-mount version. If you prefer a no-drill installation, Scanstrut also offers the ROKK Mini Adhesive Mount with 3M high-performance adhesive.

Yes, the screw-down base can be mounted on any flat surface, whether horizontal or vertical. Ensure no obstacles interfere with the movement or removal of the mount body. For vertical installation, verify the surface is sturdy enough to support the phone's weight.

Yes, the ROKK Mini accepts smartphones 45 to 95 mm wide. Recent iPhones, including Pro Max models, fall within this range. For example, an iPhone 15 Pro Max measures about 77.6 mm wide, which is fully compatible, even with a case.

Yes, the kit includes a phone clamp that attaches to the mount body. The clamp opens and closes easily using a ratchet system, allowing quick insertion and removal of your smartphone.

The base holes have a diameter of 4.2 mm (0.17 inch). To pre-drill, use a 2.5 mm (3/32 inch) drill bit to avoid cracking the mounting surface. The provided self-tapping screws No. 4 x 20 are suited to these dimensions.

Yes, the ROKK Mini can be mounted on any rigid flat surface, such as the deck of a kayak or paddle board, provided you can drill and secure it firmly. However, for lightweight boats, ensure the surface is thick enough to accommodate the screws without risk of drilling through the other side.

To preserve the mount's longevity, rinse it with fresh water after each use at sea to remove salt and residue. Use a soft cloth and soapy water if necessary. Avoid abrasive products that could damage the rubber coating or finish.

Yes, the Samsung Galaxy S24 Ultra measures approximately 79 mm in width, which falls within the 45–95 mm range of the ROKK Mini. It can be installed without issues, even with a standard protective case.