Vgrajeni komplet MB-132

The Icom MB-132 flush-mount kit is a mounting accessory designed for flush installation of Icom marine VHF stations on a dashboard or bulkhead. It allows the radio to be integrated directly into the helm console, providing a clean finish.

The MB-132 kit is used to integrate your Icom fixed VHF radio aesthetically and functionally into your helm console. It replaces the traditional bracket mounting, providing a flush finish and reducing the device's footprint at the helm station.

Using the MB-132 kit offers several advantages:

A flush, aesthetically integrated installation in the console.

Reduced physical footprint of the VHF at the helm.

Enhanced protection of the radio’s chassis against mechanical shocks or accidental snags.

Maintenance of the radio’s front panel waterproofing standards.

Yes, the MB-132 flush-mount kit is an accessory from the Icom brand, specifically designed for their marine VHF radiotelephones.

No, the MB-132 flush-mount kit is a separately sold accessory. It is designed to be used with compatible Icom fixed VHF radios, which are not included.

The MB-132 flush-mount kit is strictly compatible with the following Icom fixed VHF models:

IC-M323IC-M423GEIC-M506

No, the MB-132 kit is not compatible with the IC-M330GE model. The IC-M330GE uses a different flush-mount kit, the MBF-5.

No, the MB-132 kit is not suitable for the IC-M510E model. The IC-M510E requires a specific flush-mount kit, the MBF-7.

No, the MB-132 flush-mounting kit is developed exclusively for Icom compatible radiotelephones. Its threading and mounting brackets are specific to these units, ensuring optimal structural rigidity.

No, the MB-132 kit is not compatible with all Icom fixed VHF radios. It is specifically designed for certain compact models, such as the IC-M323, IC-M423GE, and IC-M506. It is important to verify the compatibility of your VHF model before purchasing.

The MB-132 kit is secured using a clamping system operated from the rear of the console. This mechanism ensures uniform pressure of the radio’s front panel against the cutout wall, providing a secure hold.

Yes, installing the MB-132 kit requires a precise cutout in the dashboard or bulkhead of your console to recess the VHF and the kit.

Available information does not specify whether a cutting template is included. Refer to the installation manual of your compatible Icom VHF for the exact dimensions required for the cut-out.

Installing the MB-132 flush-mount kit for your Icom VHF radio involves several key steps to ensure a secure and flush integration:

Surface preparation: The first step is to cut a precise opening in your boat’s dashboard or bulkhead. This cutout must match the exact dimensions of the compatible Icom VHF radio’s housing and the MB-132 kit for a perfect fit.

VHF insertion: Once the cutout is made, the VHF radio is inserted from the front into the prepared opening.

Secure fastening: The MB-132 kit is then positioned and used to clamp and firmly secure the VHF from the rear of the console. This rear-mounted clamping mechanism ensures even pressure on the radio’s front panel, guaranteeing that it remains flush with the dashboard surface and that the panel’s waterproofing standards (up to IPX8 depending on the VHF model installed) are maintained, protecting the helm from water or spray ingress.

This mounting method provides an integrated and aesthetically clean finish, distinct from standard bracket mounting.

Although specific tools are not listed, installing a flush-mount kit typically requires measuring tools (tape measure, pencil), cutting tools (jigsaw or rotary tool), and fastening tools (screwdriver).

Yes, the MB-132 kit is designed to secure Icom VHF radios, ensuring optimal structural rigidity against marine vibrations, thereby protecting your VHF.

The MB-132 kit provides flush or surface-mounted installation. This means the VHF is integrated directly into the dashboard or bulkhead surface, leaving only its front panel visible.