Blue Smart IP67 24/5(1) – polnilnik

The Blue Smart IP67 24/5(1) charger is fully encapsulated, making it waterproof, shock-resistant, and inflammable. Its housing is made of die-cast aluminum, and its electronic components are molded in resin, ensuring IP67 protection.

Yes, the Blue Smart IP67 24/5(1) charger is compatible with Li-ion batteries. It uses a simplified 3-stage charging algorithm (bulk, absorption, float) specifically adapted to this type of battery.

The charger uses a 5-stage adaptive charging algorithm for lead-acid batteries: bulk, absorption, reconditioning, float, and storage. This adaptive management automatically optimizes the charging process based on battery usage.

This charger delivers 94 % efficiency. It minimizes heat dissipation, wasting three to four times less heat than industry standards. Once the battery is fully charged, its power consumption drops below one Watt.

Yes, the Blue Smart IP67 24/5(1) charger can initiate charging even if the battery has been discharged to zero volts. It can also reconnect a fully discharged Li-ion battery with an internal disconnect function.

Storage mode activates when the battery has not been discharged for 24 hours. It reduces float voltage to 26.4 V for a 24 V battery to minimize gas release and corrosion. Once per week, voltage is increased to absorption level to equalize the battery, preventing stratification and sulfation.

The charger is equipped with Bluetooth Smart technology. This allows you to monitor voltage and current, adjust settings, and wirelessly update the charger via the VictronConnect app, available for smartphones, tablets, and computers.

Absorption: Normal: 28.8 V; High: 29.4 V; Li-ion: 28.4 VFloat: Normal: 27.6 V; High: 27.6 V; Li-ion: 27.0 VStorage: Normal: 26.4 V; High: 26.4 V; Li-ion: 27.0 V

Yes, the charger is protected against overheating. It can be used in hot environments, such as an engine room. The output current will be reduced if the temperature rises to 60 °C, but the charger will not fail.

The charger can operate with an AC input voltage range of 180 to 265 VAC and a frequency of 45 to 65 Hz. The nominal range is 220–240 VAC 50–60 Hz.

The charger must be installed in a well-ventilated area, close to the battery, but not directly above it due to potential corrosive gases.

Connect the negative terminal (black cable) to the battery's negative terminal (–).Connect the positive terminal (red cable) to the battery's positive terminal (+).Plug the AC power cable into the wall outlet. The charging cycle will then start.

Yes, the Blue Smart IP67 24/5(1) charger can be used as a power supply.

The charger has two LEDs for status indication:

The yellow LED indicates: bulk charge (fast blinking), absorption (slow blinking), float (steady), storage (off). The green LED indicates: power on.

Yes, Blue Smart IP67 chargers are completely silent as they have no cooling fan or other moving parts.

The Blue Smart IP67 24/5(1) charger measures ambient temperature during the test phase and compensates for temperature during the charging process. No special settings for cold or hot environments are required.

The charger comes with a 1.5-metre black and red cable for battery connection, and a 1.5-metre cable with a CEE 7/7 plug for AC connection.

If connected with reversed polarity, the external ATO-type fuse will blow. Check the cable polarity and the correct fuse rating before replacing it.

The Blue Smart IP67 24/5(1) charger has dimensions of 85 x 211 x 60 mm (height x width x depth) and weighs 1.8 kg.

The Victron Energy Blue Smart IP67 24/5(1) charger is designed as a robust and intelligent charging solution, particularly suited for demanding environments. Here are its main features and protections:

Full IP67 protection: Its die-cast aluminum housing and electronics encapsulated in resin provide complete protection against water, oil, and dust. It is also protected against ignition.Bluetooth Smart connectivity: The integrated Bluetooth technology allows you to monitor voltage and charging current, adjust settings, and update the charger via the VictronConnect app on your smartphone or tablet.Adaptive 5-stage charging algorithm: It optimizes the lifespan of lead-acid batteries with charging stages (bulk, absorption, reconditioning, float, storage). The storage mode reduces float voltage and performs weekly equalization to prevent stratification and sulfation.Li-ion compatibility: It uses a simplified 3-stage charging algorithm for Li-ion batteries.Dead battery recovery: The charger can initiate charging even if the battery is fully discharged to 0 volts and reconnect Li-ion batteries with an internal disconnect function.Overheat protection: It can be used in hot environments. The output current is reduced if the temperature rises to 60 °C, but the charger will not fail.High efficiency: With 94 % efficiency, it minimizes heat dissipation and reduces energy consumption to less than one watt once the battery is fully charged.Use as a power supply: This charger can also be used as a power supply.Integrated protections: It is protected against reverse polarity (via a fuse), output short circuits, and overheating.