Invertor 24/5000

It is a pure sine wave inverter, using SinusMax technology and a full-bridge topology with a toroidal transformer. This design provides high-quality AC power suitable for sensitive equipment.

The Victron Energy Inverter 24/5000 inverter provides a continuous output power of 5000 VA. In terms of watts, it delivers 4000 Watts at 25°C and 3700 Watts at 40°C.

This inverter can handle a peak power of up to 10 000 Watts. This capability is essential for starting inductive loads that require a high inrush current.

The inverter operates with a DC input voltage ranging from 18.6 to 34 Volts. It converts this voltage into an AC output voltage of 230 VAC, with a tolerance of ±2% according to upgrades, or ±3% as per the technical datasheet.

Yes, the inverter includes an ECO mode. In this mode, the inverter switches to standby when the load drops below a predefined value (minimum 15W). It briefly reactivates at adjustable intervals (default every 2.5 seconds) to check for load presence, then remains on if the load exceeds the set level.

You can monitor and configure the inverter via the VE.Direct port. With Bluetooth integration, a direct connection to the VictronConnect app is possible from a smartphone or tablet. For a wired connection to a computer, a VE.Direct to USB interface cable is required.

The inverter is equipped with multiple protections to ensure its reliability and the safety of the system. It is protected against:

Output short circuits.Overloads.Battery voltages that are too high or too low.Overheating (due to overload or high ambient temperature).Excessive DC ripple.

The inverter's idle power consumption is 20 Watts. Enabling ECO mode reduces this consumption to just 3.2 Watts, resulting in significant energy savings.

Yes, thanks to SinusMax technology and its high starting power capacity, this inverter is designed to start inductive loads. This includes appliances such as refrigeration compressors, pumps, and electric motors.

The inverter's AC output frequency is adjustable to 50 Hz or 60 Hz, with a precision of ±0.1%. This ensures compatibility with a wide range of electrical equipment.

Yes, the inverter has a remote on/off function. A remote on/off switch can be connected to a dedicated two-pin connector. It is also possible to connect the left contact of this connector to the battery positive, which is useful for automotive applications (for example, by linking it to the ignition switch).

Yes, the inverter chassis must be grounded. A grounding point is located outside the product. The ground conductor, connecting the chassis ground lug to earth, must be at least half the cross-section of the conductors used for the battery connection.

The AC load is connected via screw terminals. Note that the inverter does not have a fuse on its AC output. The AC wiring is protected by a fast current limiter in case of a short circuit and an overload detection mechanism. It is essential to size your wiring correctly according to the inverter's rated power.

This inverter is designed to operate with 24V DC battery systems. It is compatible with various types of service batteries, including lead-acid batteries (gel, AGM) and lithium batteries, provided they deliver the required voltage and capacity to support the inverter's power output.

No, you must never connect the inverter's AC output to another AC source, such as a domestic wall outlet or a generator. This could damage the inverter and pose a safety risk.

Yes, an external automatic transfer switch can be used to transfer the load to another AC source. For Victron inverters, the Filax Automatic Transfer Switch is recommended for its very short switching times (less than 20 milliseconds), ensuring uninterrupted power supply for sensitive electronic equipment.

No, the Victron Energy Inverter 24/5000 is specifically a pure inverter. It converts DC energy from the battery to AC. It does not include a battery charger function or an integrated AC transfer switch, unlike other Victron models such as the MultiPlus-II or Quattro.

Yes, as a pure sine wave inverter, it produces a high-quality sine wave. Its AC output voltage is 230 VAC ±2% (or ±3%), and its frequency is 50 Hz or 60 Hz ±0.1%, ensuring perfect compatibility with all types of sensitive electronic equipment, including computers, televisions, and medical devices.