Polnilnik baterij Blue Smart IP65 12V 25A CEE 7/16

The Victron Energy Blue Smart IP65 12V 25A charger is an intelligent and robust charging solution. It features a 7-step adaptive charging algorithm, can recover fully discharged batteries, and includes Bluetooth Smart connectivity for monitoring and configuration via the VictronConnect app. Its design is resistant to water, dust, and chemicals (IP65 rating).

Yes, this charger has an IP65 protection rating. This means it is fully protected against dust and resistant to water jets from all directions, making it ideal for use in demanding environments, including marine applications.

The Victron Energy Blue Smart IP65 12V 25A charger is designed to operate within a wide temperature range, from -40°C to +60°C. It can deliver its full rated power up to an ambient temperature of 30°C.

Yes, this charger is completely silent. It has no cooling fan or any other moving parts, which contributes to its durability and low thermal stress on its electronic components.

The Victron Energy Blue Smart IP65 12V 25A charger delivers very high efficiency, reaching up to 95%. Additionally, once the battery is fully charged, its standby power consumption is very low, at just 0.5 Watt.

The Blue Smart IP65 charger can recover fully discharged batteries, even those whose voltage has dropped to 0 Volts. It starts by applying a low current and resumes normal charging once sufficient voltage has been restored at the battery terminals.

The 'storage' mode is a feature designed to extend battery life when they remain connected to the charger for more than 48 hours. In this mode, the charging voltage is reduced further than the 'float' voltage to minimize corrosion of the battery's positive plates.

Yes, the Blue Smart IP65 charger measures ambient temperature during the test phase and automatically compensates the optimal charging voltage for lead-acid batteries. This ensures charging performance adapts to conditions without requiring manual adjustments for cold or hot environments.

This charger is compatible with a wide range of 12V batteries, including lead-acid batteries (flooded, AGM, gel) and Li-ion batteries (LiFePO₄). It features a specific charging algorithm for Li-ion batteries.

This 12V 25A charger is recommended for recharging batteries with a capacity between 80 Ah and 250 Ah.

No, this specific model is a 12V battery charger. It is not designed to recharge 24V batteries. If a 12V charger is connected to a 24V battery, all charge status LEDs will flash to indicate incompatibility.

Yes, this model ships with a 1.5-meter cable fitted with a CEE 7/16 plug, which is the standard outlet type used in many European countries.

To connect the charger:

First, connect the charger’s DC output cables (black and red) to the corresponding battery terminals (red to positive, black to negative). Then, plug the charger’s AC power cable into a wall outlet. The charge status LEDs will flash if an incorrect connection is detected.

The Victron Energy Blue Smart IP65 charger is protected against reversed polarity. If the cables are incorrectly connected to the battery, all status LEDs will flash to alert you, and no spark will occur. Simply correct the connection for the charger to operate normally.

Yes, you can leave the charger permanently connected. Thanks to its adaptive 'storage' mode, it reduces the charging voltage after 48 hours of continuous connection to minimize positive plate corrosion and thus extend battery life.

You will know the battery is fully charged when the 'FLOAT' or 'STORAGE' LED is lit continuously. The 'ABSORPTION' LED lights up when the battery is charged to approximately 80%.

The charger’s dimensions (height x width x depth) are 75 x 140 x 240 mm. Its weight is 1.9 kg.

Yes, the Victron Energy Blue Smart IP65 charger is covered by the manufacturer's warranty.

Thanks to its integrated Bluetooth Smart module, you can remotely monitor the charging status and battery, as well as configure charger settings. Simply use the VictronConnect app on your smartphone or tablet.