SmartSolar MPPT VE.Can 250/100 Tr RS

The Victron Energy VE.Can interface is a communication protocol integrated into SmartSolar MPPT solar charge controllers. It is designed for advanced integration and management of energy systems, particularly in marine applications. It enables the connection and synchronization of multiple devices within a unified network, facilitating monitoring and performance optimization of your solar installation.

Ultra-fast MPPT (Maximum Power Point Tracking) technology enables the charge controller to significantly improve energy harvesting. In cloudy conditions or with continuous changes in light intensity, the controller quickly adapts to locate the maximum power point. This can increase energy output by up to 30 % compared to PWM charge controllers and up to 10 % compared to slower MPPT controllers.

In case of partial shading, the power-voltage curve of a solar panel can have multiple maximum power points (MPP). Conventional MPPTs tend to lock onto a local MPP, which is not always the optimal MPP. The innovative SmartSolar algorithm always maximizes energy harvest by locking onto the optimal MPP, ensuring superior performance even under complex shading conditions.

The SmartSolar MPPT charge controller with VE.Can interface offers exceptional conversion efficiency. Its maximum efficiency exceeds 98%, and it operates without a cooling fan, which contributes to its reliability and durability.

Yes, the charge controller is equipped with extended electronic protection to ensure system safety and longevity. This includes:

Protection against overheating and power reduction when temperature is high.Protection against PV short-circuits and PV polarity reversal.Protection against reverse PV current.

The charge controller features a flexible and fully programmable charging algorithm. It also comes with eight pre-programmed algorithms, selectable via a rotary switch. This allows precise adaptation of the charging process to the specific needs of your battery type and application.

Yes, Bluetooth Smart is integrated into the SmartSolar charge controller. This wireless feature allows you to configure, monitor, update, and synchronize SmartSolar charge controllers. It provides a convenient solution for managing your system via the VictronConnect app on smartphone or tablet.

The charge controller records detailed trend data. This includes battery voltage, current and temperature, as well as charge output current, PV voltage and PV current. This information is stored for 46 days, enabling in-depth analysis of system performance over an extended period.

Yes, the SmartSolar MPPT charge controller has a fully discharged battery recovery function. It can initiate charging even if the battery has been discharged to zero volts. It will also reconnect a fully discharged Li-ion battery equipped with an integrated disconnect function.

The charge controller is designed to operate within a temperature range of -30 to +60 °C. It can deliver its full nominal power up to an ambient temperature of 40 °C.

The standby power consumption of the charge controller is very low. It is less than 35 mA for a 12 V system and less than 20 mA for a 48 V system, minimizing the impact on the battery when there is no solar production.

Yes, the charge controller can be used up to a maximum altitude of 5000 meters. However, its full nominal power is guaranteed only up to 2000 meters.

The charge controller has an IP43 rating for the electronic components, meaning it is protected against solid objects larger than 1 mm and water splashes. The connection area has an IP22 rating, providing protection against solid objects larger than 12.5 mm and water drops at a 15-degree angle.

The VE.Can interface enables wired data connection to devices such as the Color Control GX, other Victron Energy GX products, or a PC. This connectivity allows centralized monitoring and management of your power system.

The VE.Can protocol allows synchronization of up to 25 SmartSolar MPPT charge controller units for parallel operation. This capacity is ideal for large-scale solar installations requiring multiple controllers.

Yes, external battery voltage, temperature, and current sensors can be connected via Bluetooth. Devices such as a Smart Battery Sense, an intelligent battery monitor BMV-712, or a SmartShunt can be used to relay this data to one or more SmartSolar charge controllers, improving charge accuracy.

The SmartSolar MPPT charge controller with VE.Can interface automatically supports battery voltages of 12 V, 24 V and 48 V. Manual configuration is also possible for 36 V systems.

Yes, the charge controller is compatible with lithium batteries. It includes a function that allows it to reconnect to a fully discharged Li-ion battery equipped with an integrated disconnection feature, which is essential for managing this type of battery.

The charge controller is designed for indoor installation in an unconditioned environment. It is important to consult the user manual for specific mounting instructions to ensure adequate ventilation and optimal operation.

For a wired data connection, the charge controller is equipped with VE.Can and VE.Direct ports. These ports allow it to be connected to a Color Control GX, other GX products, a PC, or other devices for data transmission and monitoring.