Invertor Phoenix VE.Direct Schuko 12V/800W

The Victron Energy VE.Direct Schuko inverter (reference PIN121801200) delivers a continuous output power of 800W at an ambient temperature of 25°C. This power drops to 650W when the ambient temperature reaches 40°C.

This inverter is equipped with a Schuko (CEE 7/4) AC output plug, compliant with European standards.

Yes, this inverter is designed to handle inductive loads at startup. It can provide a high startup power of up to 1200W for 15 seconds.

This inverter requires a DC input voltage of 12V. The input voltage range is 9.2 to 17V.

Yes, the inverter includes multiple protections to ensure reliability and safety:

Short-circuit protection.Overload protection.Protection against overheating due to excessive load or high ambient temperature.Protection against excessively high or low battery voltages.Protection against excessive DC ripple.

ECO mode is a configurable feature that reduces the no-load power consumption of the inverter. When the connected load drops below a predefined value (minimum 15W), the inverter switches to standby mode, reducing its no-load consumption to just 1W. In standby mode, the inverter briefly powers back on at regular intervals (default every 2.5 seconds, adjustable) to check if the load has increased. If the load exceeds a predefined level, the inverter remains on.

The inverter can operate in an ambient temperature range from -40°C to +65°C. It is important to note that above 40°C, the inverter's continuous power output is reduced by 1.25% per additional degree Celsius.

The Victron Energy VE.Direct Schuko inverter has an IP21 protection rating. This means it is protected against solid objects larger than 12.5 mm and against vertically falling water droplets. It is suitable for protected environments.

Yes, the inverter is equipped with a VE.Direct communication port. This port enables full configuration and monitoring of the device. You can connect it to a computer via a VE.Direct to USB cable, or to smartphones, tablets, and MacBooks via a VE.Direct Bluetooth Smart dongle.

For optimal performance and trouble-free operation, the inverter must be installed on a flat surface. It is essential to avoid any contact with water, direct exposure to sunlight, and to ensure the ambient temperature is between -20°C and 40°C (with non-condensing humidity below 95%). Leave at least 10 centimeters of free space around the inverter for adequate ventilation. In case of overheating, the inverter will shut down and restart automatically once the temperature returns to a safe level.

Yes, this inverter is a Safety Class I product, and the chassis must be grounded. A grounding point is located on the outside of the product. The grounding conductor connecting the chassis to ground must have a cross-section of at least half that of the conductors used for the battery connection.

An on/off remote can be connected to a dedicated bipolar connector. Alternatively, the left contact of this connector can be linked to the battery's positive terminal, which is useful for automotive applications by connecting it to the ignition switch. The inverter's front switch must also be set to the 'On' or 'ECO' position for the inverter to start.

The inverter does not include a fuse in its AC output. The AC wiring is protected by a fast-acting current limiter in case of a short circuit, and by an overload detection mechanism that mimics fuse behavior (i.e., faster shutdown in case of higher overload). It is critical to size your wiring correctly based on the inverter's nominal power.

You can connect standard household appliances requiring 230V AC power, within the 800W continuous power limit. This includes loads such as power inverters for LED lights, halogen lamps, or power tools.

No, this specific model (PIN121801200) is designed to operate with a 12V DC input voltage. It is not compatible with 24V or 48V systems.

Yes, this inverter is designed for marine and mobile applications. It is built to provide reliable power for standard household devices in these environments and complies with the automotive directive ECE R10-4.

The VE.Direct communication port allows monitoring the battery input voltage via a computer or connected mobile device. For more advanced and detailed monitoring of the battery charge state, including current, consumed Ah, and remaining time, Victron Energy recommends using a BMV battery monitor (accessory not included).

Yes, for low-power inverters like this one, Victron Energy recommends using an automatic transfer switch such as the Filax. The Filax offers a very short switching time (less than 20 milliseconds), allowing computers and other electronic equipment to continue operating without interruption during the transfer to another AC source.