Portafusible classe T 600 A

A Class T fuse holder is an electrical protection component designed to handle very high currents and provide superior interrupting capacity. It is crucial for the safety of marine electrical systems, especially those powering high-consumption equipment such as powerful inverters, bow thrusters, or large battery banks. Its high interrupting capacity allows for rapid and safe disconnection in the event of a short circuit, thereby preventing equipment damage and fire risks.

The primary function of this fuse holder is to protect marine electrical circuits from overcurrents and short circuits. It is specifically designed for high-power applications, capable of handling currents ranging from 450 to 600 A at 50 VDC, with a very high interrupt rating of 20,000 to 50,000 A.

This fuse holder is ideal for protecting high-power electrical equipment in marine systems. This includes powerful inverters, bow thrusters, and large-capacity battery banks, where maximum protection against overcurrent is essential.

The BEP 778-T2S-600 fuse holder has compact dimensions of 147 mm in length, 49 mm in width, and 61 mm in height (5.8 x 1.9 x 2.4 inches).

The BEP 778-T2S-600 fuse holder weighs 382 grams (approximately 13.5 oz).

This fuse holder is designed to operate with a maximum voltage of 50 VDC (direct current).

The BEP 778-T2S-600 fuse holder provides a high interrupting rating, ranging from 20 000 to 50 000 A. This feature is critical for safety in the event of very high short-circuit currents.

The class T fuse holder 778-T2S-600 offers significantly superior protection compared to standard ANL-TP fuse holders. While a typical ANL-TP handles 35-500 A with a DC interrupt rating of 3,000 A, the 778-T2S-600 manages 450-600 A and has an interrupt rating of 20,000 to 50,000 A. This robustness makes it essential for circuits where very high short-circuit currents may occur.

No, the BEP 778-T2S-600 fuse block is sold separately. The corresponding T-class fuse (450-600 A) must be purchased separately.

Yes, the BEP 778-T2S-600 fuse holder is specifically designed as a high-performance electrical protection solution for demanding marine systems, ensuring robustness and reliability suited to this environment.

This fuse holder is specifically designed for class T fuses. It is compatible with class T fuses rated for currents from 450 to 600 A.

The connection studs for cables have a diameter of 10 mm (3/8").

Yes, this fuse block model is part of current BEP solutions for marine energy management and complements CZone systems for integrated and secure electrical architecture.

Yes, this fuse holder is rated for a maximum voltage of 50 VDC, making it fully compatible and safe for use with 12V or 24V marine electrical systems.

The connection studs for the cables have a diameter of 10 mm (3/8"). The studs specifically designed for class T fuses have a diameter of 12 mm (0.47").

The two additional studs integrated into the fuse holder provide versatile connection points. They can be used for auxiliary or bypass applications, thereby increasing the flexibility of your electrical system.

Yes, this BEP product is covered by the manufacturer's standard warranty, covering manufacturing and material defects.