Deckhand Dimmer - 12V DC 6A - Deckhand Dimmer - 12V DC 6A

Deckhand Dimmer - 12V DC 6A - Dimensioned Drawing

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 11%

Blue Sea Systems

7506-BSS

Variador Deckhand - 12 V CC 6 A

Q: What type of lighting can the Deckhand 7506-BSS dimmer control?

The Deckhand 7506-BSS dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent lights, and halogen lights.

Q: What is the nominal operating voltage of this Blue Sea Systems dimmer?

This dimmer operates at a nominal voltage of 12 V DC.

Q: What is the input voltage range accepted by the Deckhand 7506-BSS drive?

The Deckhand 7506-BSS drive operates within an input voltage range of 9 V to 16 V DC.

Q: What is the maximum output current capacity of this drive?

The Deckhand 7506-BSS drive has a maximum output current capacity of 6 A.

Q: What is the function of the integrated 'Bulb Saver' in the dimmer?

The 'Bulb Saver' function (bulb saver) is designed to prevent excessive aging of bulbs during the boat's electrical system charging phases.

Q: Does the dimmer store the last brightness setting?

Yes, the Deckhand 7506-BSS dimmer stores the last brightness setting used.

Q: What is the operating temperature range of this drive?

The drive is designed to operate within a wide temperature range, from -40 °C to 85 °C.

Q: What is the maximum leakage current of the device?

The maximum leakage current of the Deckhand 7506-BSS drive is less than 2 mA.

Q: What type of brightness control does the Deckhand dimmer use?

The dimmer uses continuous pulse-width modulation (PWM) control, allowing adjustment from 0 to 100% of the input voltage.

Q: Is this autopilot drive supplied with a switch?

Yes, the autopilot drive is supplied with a momentary (ON)-OFF-(ON) switch.

Le variateur Deckhand 7506-BSS de BLUE SEA est une solution numérique de 12 V CC et 6 A pour le contrôle de l'intensité des éclairages marins (LED non régulées, incandescents, halogènes).

Il offre une modulation PWM continue, une mémoire de réglage, et une fonction "bulb saver", et est livré avec un interrupteur momentané (ON)-OFF-(ON).

Ce modèle, qui remplace les 7501/7502, fait partie de la gamme Deckhand, reconnue pour sa fiabilité et sa conformité aux normes ISO 8846 et SAE J1171.

Tensió: 12 V

12 V 24 V

Corrent: 6 A

6 A 12 A

Public priceGet pro pricing

98,34€

98,34€ ~~110,58€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tipus d'interfície de control	Numérique (PWM)
Tipus de control	Interrupteur momentané (ON)-OFF-(ON)
Sistemes d'il·luminació compatibles	LED non régulées, incandescentes, halogènes
Zone Control	Non
Interval de tensió de funcionament	9-16
Consum elèctric típic	<0.024
Tipus d'instal·lació	Montage sur panneau
Dimensions del producte	82.55 x 88.9 x 44.45
Variador compatible	Oui
Contingut del pack	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Certificacions	CE,ISO 8846,SAE J1171,SAE J1455,SAE J1113
Nom del fabricant	BLUE SEA SYSTEMS
Número de peça del fabricant	7506
Maximum Output Current	6
Maximum Parasitic Current	2
Tensió nominal	12
Temperatura de funcionament màxima	85
Temperatura de funcionament mínima	-40
SKU del producte	7506-BSS

Detailed description

Dissenyat per a la gestió de l'enllumenat marí, el variador Deckhand 7506-BSS de BLUE SEA SYSTEMS ofereix un control digital precís de la intensitat lluminosa. Aquest aparell és compatible amb els enllumenats LED no regulats, incandescents i halògens que funcionen amb una tensió nominal de 12 V CC, amb un marge de funcionament de 9 V a 16 V.

Característiques tècniques i rendiment

El variador Deckhand 7506-BSS integra un control per modulació d'amplada d'impuls (PWM) continu, permetent un ajust de 0 a 100 % de la tensió d'entrada. La seva capacitat de sortida màxima és de 6 A, mentre que el seu corrent parasitària es manté inferior a 2 mA. Funciona en un marge de temperatures ampli, de -40 °C a 85 °C. Una funció de protecció de bombeta evita l'envelliment prematur de les bombetes durant les fases de càrrega del sistema. Aquest model disposa també d'una memòria per a l'última configuració de brillantor i una sortida il·luminada amb un retard ajustable d'1 a 5 minuts per facilitar la sortida. Les seves potes de muntatge desplaçades permeten una instal·lació propera de diversos variadors, i s'inclou un interruptor momentani (ON)-OFF-(ON).

Posicionament i conformitat

El variador Deckhand 7506-BSS es posiciona com una solució de gestió d'enllumenat versàtil per a circuits marins de baixa a mitjana potència. En la gamma Deckhand, representa l'opció de 12 V CC menys potent (6 A), complementada pels models 7507 (12 A) i 7508 (25 A) per a necessitats superiors, així com versions de 24 V CC (7504, 7509). Aquest variador compleix les normes de protecció contra l'encesa ISO 8846 i SAE J1171, i porta el marcatge CE, garantint la seva fiabilitat i seguretat en entorn marí. Substitueix els antics models 7501 o 7502 de la marca, oferint una funcionalitat millorada amb unes dimensions de 82,55 mm d'amplada i 88,9 mm d'alçada.

Documentation

Type	Nom
	EN - Instructions - Deckhand Dimmer - 12V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 12V DC 6A

Payment and security

Your payment information and data are processed securely.

Variador Deckhand - 12 V CC 6 A

98,34€

98,34€ ~~110,58€~~

Complete your installation with

Complementary equipment

Coupe-batterie à distance ML-RBS avec commande manuelle - 12V DC 500A - ML-RBS Remote Battery Switch with Manual Control - 12V DC 500A

Coupe-batterie à distance ML-RBS avec commande manuelle - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Tallabateries de bateries a distància ML-RBS amb comandament manual - 12 V CC 500 A

Ref : 7700B-BSS

245,71€

245,71€ ~~297,48€~~

Sélecteur de batterie e-Series 4 positions - Mounting Diagram

Blue Sea Systems

Selector de bateria e-Series de 4 posicions

Ref : 9001EB-BSS

63,31€

63,31€ ~~70,80€~~

Blue Sea Systems

Amperímetre M2 DC

Ref : 1832-BSS

419,60€

419,60€ ~~466,08€~~

Mini OLED DC Voltmeter - Yellow - Mini OLED DC Voltmeter - Yellow

Blue Sea Systems

Mini voltímetre CC OLED - Groc

Ref : 1733-BSS

52,97€

52,97€ ~~64,44€~~

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Relé de càrrega automàtic ML-ACR amb control manual - 12 V CC 500 A

Ref : 7622B-BSS

245,47€

245,47€ ~~362,28€~~

12/24V Dual USB 4.8A Chargers - Switch Mount - 12/24V Dual USB 4.8A Chargers - Switch Mount

Blue Sea Systems

Carregadors doble USB 12/24 V 4,8 A - Per muntatge sobre interruptor

Ref : 1039-BSS

48,18€

48,18€ ~~57,72€~~

Dash Socket 12V DC with Watertight Cap - Dash Socket 12V DC with Watertight Cap

Dash Socket 12V DC with Watertight Cap - Socket Dimensioned Drawing

Blue Sea Systems

Presa tauler de comandament 12 V CC amb caputxa estanca

Ref : 1011-BSS

13,96€

13,96€ ~~15,72€~~

Kit de conversion de panneau 360° - 12 à 24 V CC - 360 Panel Conversion Kit - 12 to 24V DC

Blue Sea Systems

Kit de conversió de panell 360° - 12 a 24 V CC

Ref : 4113-BSS

10,56€

Alarme Floyd Bell Turbo Série - Floyd Bell Turbo Series Alarm

Blue Sea Systems

Alarma Floyd Bell Turbo Series

Ref : 1070B-BSS

29,27€

29,27€ ~~34,98€~~

Frequently Asked Questions

Need help? Contact us

What type of lighting can the Deckhand 7506-BSS dimmer control?

The Deckhand 7506-BSS dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent lights, and halogen lights.

What is the nominal operating voltage of this Blue Sea Systems dimmer?

This dimmer operates at a nominal voltage of 12 V DC.

What is the input voltage range accepted by the Deckhand 7506-BSS drive?

The Deckhand 7506-BSS drive operates within an input voltage range of 9 V to 16 V DC.

What is the maximum output current capacity of this drive?

The Deckhand 7506-BSS drive has a maximum output current capacity of 6 A.

What is the function of the integrated 'Bulb Saver' in the dimmer?

The 'Bulb Saver' function (bulb saver) is designed to prevent excessive aging of bulbs during the boat's electrical system charging phases.

Does the dimmer store the last brightness setting?

Yes, the Deckhand 7506-BSS dimmer stores the last brightness setting used.

What is the operating temperature range of this drive?

The drive is designed to operate within a wide temperature range, from -40 °C to 85 °C.

What is the maximum leakage current of the device?

The maximum leakage current of the Deckhand 7506-BSS drive is less than 2 mA.

What type of brightness control does the Deckhand dimmer use?

The dimmer uses continuous pulse-width modulation (PWM) control, allowing adjustment from 0 to 100% of the input voltage.

Is this autopilot drive supplied with a switch?

Yes, the autopilot drive is supplied with a momentary (ON)-OFF-(ON) switch.

What are the physical dimensions of the Deckhand 7506-BSS drive?

The dimensions of the Deckhand 7506-BSS drive are:

Width: 3.25 inches (82.55 mm)Height: 3.5 inches (88.9 mm)

Is this drive compliant with safety and regulatory standards?

Yes, the Deckhand 7506-BSS drive is CE marked and compliant with the ignition protection requirements of ISO 8846 and SAE J1171.

Can I use this dimmer with LED lights that are already regulated?

No, this dimmer is specifically designed to control the intensity of unregulated LEDs. It may not function properly or could damage regulated LEDs.

Is this variable speed drive compatible with a 24 V DC electrical system?

No, the 7506-BSS model is designed for 12 V DC systems. For 24 V DC systems, other models in the Deckhand range are available, such as PN 7504 or 7509.

Can this dimmer be used with types of bulbs other than LED, incandescent, or halogen?

The dimmer is specifically designed for unregulated LED lighting, incandescent, and halogen bulbs. Use with other types of bulbs is not guaranteed and may not work correctly.

How does the delayed dimmer off function work?

The illuminated output function keeps the lights on for an adjustable duration after the dimmer is turned off. Here’s how to set it:

1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash. The lights will stay on for 1 minute.2-to-5-minute delay: After the first flash, hold the switch in the high (illuminated) position for 1 to 4 seconds. Release the switch after 2 to 5 flashes. The lights will stay on for 1 minute per flash, up to a maximum of 5 minutes.

Is it possible to install multiple Deckhand drives side by side?

Yes, the Deckhand 7506-BSS drive has offset mounting feet that allow installing multiple drives very close to each other.

Does the dimmer support multiple switch locations for brightness control?

Yes, the Deckhand 7506-BSS dimmer is designed to support multiple switch locations, providing installation flexibility.

How to adjust the delay for the lighted exit function?

To adjust the delay for the lighted exit function:

For a 1-minute delay: Hold the switch in the upper (lighted) position for 2 seconds until the lights flash once. Release the switch.For delays of 2 to 5 minutes: After the first flash, hold the switch in the upper (lighted) position for 1 to 4 seconds, then release after the number of flashes corresponding to the desired minutes (e.g., 3 flashes for 3 minutes).

What are the main connections for installing the Deckhand dimmer?

The Deckhand dimmer's main connections are as follows:

+12V DC (red) : Positive power supply.Ground (black) : Ground.Lamp (blue) : Connection to the lighting.Up Input (white) : Input to increase brightness.Down Input (grey) : Input to decrease brightness.A (ON)-OFF-(ON) switch is included for brightness control.