Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Estalvieu 4%

Raymarine

E70340

Sonda de bronze passant amb feix cònic HIGH CHIRP angle 12° CPT-S, cable de 10 m

La sonde bronze traversante RAYMARINE E70340 CPT-S offre une détection sous-marine précise grâce à son faisceau conique HIGH CHIRP de 12°. Conçue pour une durabilité accrue en milieu marin, elle est idéale pour les MFD Raymarine compatibles nécessitant un sonar traditionnel performant. La sonde est fournie avec un câble de 10m intégré.

Angle: 12 graus

0 graus 12 graus 20 graus

Public priceGet pro pricing

308,58€

308,58€ ~~324,00€~~

IVA inclòs Expedició calculada en el moment del pagament.

En estoc

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Tecnologies de sondatge compatibles	CHIRP Haute Fréquence
Freqüències del sonar	170-230
Temperatura de funcionament	-10 à +50
Profunditat màxima de lectura	274.0
Material de la sonda	Bronze
Tipus de connector per a sondes	Raymarine CPT-S
Longitud del cable	10.0
Pantalles compatibles	Raymarine Axiom, Element, Dragonfly (avec adaptateur si nécessaire)
Fondària del producte	100
Grau de protecció IP	IPX6/IPX7
Connectivitat sense fils	Non
Tipus de muntatge	Traversante
Certificacions	2013/53/EU,EN ISO 8846:2017
Angle de cobertura del feix	25
Freqüència CHIRP alta	170-230
Sensor de velocitat integrat	Non
Any de llançament	2017.0
Garantia	2.0

Detailed description

La sonda de bronze passant E70340 de RAYMARINE és una solució de detecció submarina dissenyada per als sistemes sondadors CHIRP. Aquest model CPT-S és una sonda passant de bronze amb un feix cònic HIGH CHIRP, que ofereix un angle de 12° per compensar el V de la coberta. Es lliura amb un cable integrat de 10 metres, cosa que en facilita la instal·lació en una varietat de vaixells.

Tecnologia Sonar CHIRP Precisa

Integrada a la gamma CPT-S de Raymarine, aquesta sonda utilitza la tecnologia HIGH CHIRP per proporcionar retorns sonar detallats i una separació de les targets millorada. A diferència dels sistemes DownVision, que ofereixen una imatge fotorealista del fons, aquest model se centra en un feix cònic tradicional, optimitzat per a la detecció de peixos i el seguiment precís del fons marí en profunditats variades. La seva construcció en bronze la posiciona com una opció més duradora que les versions de plàstic (com ara l’A80447 per al mateix angle de 12°), especialment adequada per a entorns marins exigents i per a cobertes de fusta o de fibra de vidre.

Instal·lació i Conformitat

La sonda E70340 està dissenyada per a una instal·lació passant, que requereix foradar la coberta. L’angle de 12° s’ha triat específicament per a cobertes amb un deadrise moderat, assegurant que el feix sonar es dirigeixi verticalment cap al fons. És imprescindible no tallar el cable de la sonda, ja que això provocaria una degradació significativa del rendiment del sondador, anul·laria la garantia i invalidaria el marcatge CE europeu. Aquest producte compleix les normes harmonitzades 2013/53/EU i EN ISO 8846:2017, garantint-ne la fiabilitat i la seguretat per a un ús marí. Per obtenir un rendiment òptim, la sonda s’ha d’utilitzar únicament dins l’aigua per evitar qualsevol sobreescalfament.

Documentation

Type	Nom
	EN - Plan technique - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	FR - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Expert review

Pol CONIN

Responsable digital

« Technical analysis of the Raymarine CPT-S bronze 12° CHIRP depth sounder »

The Raymarine CPT-S E70340 depth sounder is a sound technical choice for recreational boaters and anglers seeking a reliable and robust CHIRP sonar solution. Unlike RealVision 3D multi-element transducers that provide sophisticated imaging, this model focuses on the performance of a dedicated HIGH CHIRP conical beam. Its bronze construction is a major asset for durability, outperforming plastic versions in harsh marine environments, particularly for boats kept afloat year-round or in saltwater. It is particularly well-suited for wooden or fiberglass hulls, where a through-hull installation is preferred to avoid turbulence.

The 12° beam angle of the depth sounder is specifically designed to compensate for the deadrise of hulls with a moderate angle, ensuring the sonar beam is perpendicular to the seabed for optimal reading. It is essential to verify the compatibility of this angle with your hull design before installation to avoid beam tilt that would degrade performance. Although the CPT-S series is a previous generation compared to the newer RealVision systems, it remains relevant for compatible Raymarine MFDs (such as Dragonfly models or certain A, eS, gS series) requiring a traditional CHIRP sonar for precise fish detection and bathymetry.

The through-hull installation, while more complex than a transom-mount setup, offers superior hydrodynamic performance and better transducer protection. It requires careful attention to hull drilling and sealing to ensure the vessel's integrity. This depth sounder does not provide DownVision or SideVision imaging; it should therefore be prioritized if your primary need is a high-performance traditional CHIRP sonar without advanced imaging features, or if you are complementing an existing system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sonda de bronze passant amb feix cònic HIGH CHIRP angle 12° CPT-S, cable de 10 m

308,58€

308,58€ ~~324,00€~~

Complete your installation with

Complementary equipment

Raymarine

AIS 700 Classe B amb SPLITTER d'antena integrat

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Frequently Asked Questions

Need help? Contact us

What is HIGH CHIRP technology and what is the purpose of the cone beam of this depth sounder?

The HIGH CHIRP technology used by this Raymarine CPT-S depth sounder provides highly detailed sonar returns and improved target separation underwater. Unlike DownVision imaging systems, the traditional cone beam of this depth sounder is optimized for precise fish detection and seabed tracking across various depths.

Why does this through-hull transducer have a 12° angle?

The 12° angle of this transducer is specifically designed to compensate for the deadrise of your vessel’s hull. This ensures the sonar beam is directed vertically toward the seabed, providing optimal performance and accurate readings, especially for hulls with moderate deadrise.

What type of installation is required for this Raymarine transducer?

This transducer is a through-hull model, meaning it requires drilling the hull of your boat for installation. Raymarine recommends installation by a certified installer to ensure proper implementation and to benefit from the enhanced warranty.

Can I cut the depth sounder cable if its 10-metre length is excessive for my boat?

No, it is essential not to cut the depth sounder cable. Trimming the cable will significantly degrade the fishfinder’s performance, void the product warranty, and invalidate the European CE mark. If the cable is cut, it cannot be repaired and must be replaced.

With which Raymarine devices is this CPT-S transducer compatible?

This CPT-S transducer is designed to be compatible with Raymarine CHIRP fishfinder systems. It typically works with Raymarine multifunction displays (MFD) from the Axiom and Element series, as well as with certain Dragonfly models that support CPT-S conical beam transducers.

Why is this transducer made of bronze rather than plastic?

This transducer is made of bronze to provide enhanced durability, particularly suited to demanding marine environments. Bronze is a more robust option than plastic and is recommended for fiberglass or wooden hulls, ensuring better longevity and resistance to the elements.

How should I maintain and clean my depth sounder to ensure its performance?

To maintain your depth sounder's performance, follow these guidelines:

Apply a thin coat of water-based antifouling paint to the depth sounder to prevent marine growth buildup. Reapply every 6 months or at the start of each season.

Clean the depth sounder with a soft cloth and mild household detergent.

For stubborn grime, use a scrubbing pad, such as Scotch Brite™, ensuring not to scratch the face of the depth sounder.

Warning: Never use ketone-based paint, spray paint, or harsh cleaning solvents like acetone, as they will damage the depth sounder.

Which compliance standards does this Raymarine transducer meet?

This Raymarine E70340 transducer complies with European harmonized standards. It meets Directive 2013/53/EU for marine equipment and EN ISO 8846:2017, ensuring reliability and safety for marine use.