Passacable Low Profile per cables de Ø 2 a 8 mm i connectors fins a Ø 16 mm - Alumini anoditzat negre

The Scanstrut DS-LP-16-BLK cable gland is made of black anodized aluminum, providing excellent corrosion resistance in marine environments.

Once installed, this Low Profile cable gland has a height of only 5 mm (0.2 inches), making it a very discreet solution.

This model, the DS-LP-16-BLK, is black anodized, featuring a sleek matte finish that blends discreetly on most marine surfaces.

This cable gland is designed for cables with a diameter between 2 mm and 8 mm.

This cable gland can accommodate connectors with a diameter up to 16 mm.

To install this cable gland, you must drill a 25 mm (1 inch) hole using a hole saw.

For installation, you will need the following tools:

A 2 mm (5/64") drill bit for soft materials (plywood) or 2.5 mm (3/32") for hard materials (fiberglass, hardwood, acrylics).A hole saw or a 25 mm (1") drill bit.A Pozidriv screwdriver.

The kit includes 3 No.4 x 19mm screws and 3 M3 x 5mm countersunk bolts. The No.4 screws are for soft materials, and the M3 bolts for hard materials.

Watertightness is ensured by a supplied base gasket that sits between the cable gland and the mounting surface. Additionally, the rubber bungs fit precisely to your cable diameter for a watertight seal.

Yes, this product is specifically designed as a Scanstrut marine product. Its black anodized aluminum body provides excellent corrosion resistance in marine environments.

The outer diameter (øA) of this cable gland is 49.9 mm (1.96 inches).

You must choose the bung with the hole diameter closest to your cable’s diameter to ensure optimal watertightness. The kit includes bungs for cables from 2 to 8 mm.

Yes, it can be installed on metal surfaces. However, for these materials, it is recommended to use M3 countersunk bolts longer than 12 mm with a washer and a Nyloc nut, which are not included in the kit. The suggested pilot hole for metal is 3 mm.

Yes, it is compatible with a wide range of marine cables, including power, data, and sensor cables, provided their diameter is between 2 and 8 mm and their connectors do not exceed 16 mm.

Yes, the Scanstrut Low Profile range includes other models for larger cable diameters, such as the DS-LP-21A (for cables from 4 to 9 mm) and DS-LP-30 (for cables from 9 to 14 mm).

Pilot hole diameter depends on the material: 2 mm for soft materials (such as plywood) and 2.5 mm for hard materials (such as fiberglass, hardwoods, or acrylic).

This cable gland is part of the Scanstrut Seal / Low_Profile product family.

Yes, a base gasket is included in the kit to ensure a watertight seal between the cable gland and the mounting surface.