CZONE COI NO CONNECTORS

The CZone COI (Combination Output Interface) is a compact, intelligent digital switching module. It is designed to replace traditional fuse boxes and circuit breaker panels in marine and recreational vehicle applications. Its primary role is to centralize the management of electrical systems, simplifying installation and wiring aboard. It provides a versatile solution for controlling and monitoring various equipment.

The CZone COI module has a total of 30 channels, including 16 output channels for electrical load management:

4 high-current outputs at 25A and 12 low-current outputs at 10A, which are also dimmable for lighting control.

The COI module integrates 8 versatile analog inputs. They are compatible with various signal types for sensor monitoring, such as fuel levels or battery voltage. These inputs can handle:

Positive or negative switching signals.Voltages from 0 to 32V.Resistances from 0 to 1000 Ohms.Currents from 4 to 20mA.

Yes, the CZone COI module can monitor the current on all 16 output channels. This feature enables precise anomaly detection and ensures better management of the electrical supply to each circuit.

The COI module includes dual circuit protection:

Configurable electronic fuse protection. Mechanical protection via ATC fuse and bypass system, compliant with ABYC/CE and AS/NZS 3004 standards.

The CZone COI module is designed to operate within a wide power supply voltage range, from 9 to 32 Volts. It also includes a power availability LED indicator and a voltage monitoring function.

The CZone COI module’s power consumption over the NMEA 2000 network is 250mA at 12V in normal operation and 180mA at 12V in standby mode.

The CZone COI module can handle a maximum continuous current of 150A at 40°C. It is important to note that this capacity is derated above 40°C.

Yes, the CZone COI module has an IPx5 protection rating. This means it is protected against low-pressure water jets from all directions, provided it is mounted at 0°, +/-90°.

Yes, the CZone COI module includes 4 high-current channels dedicated to bilge pump circuits. These channels allow integrated manual control of the pump and detection of its operation, all from a single channel and without additional wiring.

Firmware updates for the CZone COI module can be performed easily via a USB port. Simply use a USB flash drive formatted as FAT32 (up to 32 GB is recommended) containing the firmware update file (*.czfwp).

For power supply, the CZone COI module uses studs:

An M8 (5/16") stud for the positive, with a maximum tightening torque of 8-10 Nm. An M6 (1/4") stud for the negative, with a maximum tightening torque of 4-5 Nm.

During installation, it is critical to ensure the COI module is located in an easily accessible area to allow quick access to the fuses. Additionally, the bulkhead or mounting surface must be strong enough to support the unit’s weight (1.9 kg), and sufficient clearance above the module must be provided to remove the cover.

To configure the COI module on the CZone network, a DIP switch must be set. The number of this DIP switch must be unique for all modules present on the CZone network and must match the DIP switch setting defined in the software configuration for the module to function correctly.

When installing or maintaining the CZone COI module, it is imperative to:

Never work on the COI or the system while it is still connected to a power source. Only qualified electricians should be permitted to make changes to your electrical system. Inspect the wiring at least once a year and immediately correct any faults such as loose connections or burnt cables.

The CZone COI module is fully compatible with the NMEA 2000 communication network, allowing it to integrate seamlessly into existing marine electronic systems.

The CZone COI module is certified to several international standards, ensuring its quality and safety. It holds CE, ABYC, and NMEA certifications.

Yes, the "NO CONNECTORS" model (reference 80-911-0120-00) means that the CZone COI module itself is equipped with receptacles for Deutsch-type connectors, but the corresponding male connectors are not included in the box. You will need to purchase them separately, for example via the CZone COI Deutsch connectors kit (reference 80-911-0131-00) or other compatible accessories.

Yes, the CZone COI module is equipped with two additional voltage sensors. These sensors monitor the voltage at the main positive stud of the power supply as well as the NMEA 2000 network power supply voltage.

The CZone COI module provides 6 digital inputs. These are accessible via a digital breakout box and enable functions such as system activation or backlighting.