Support de montage sur rotule 8 degrés (LiveScope™ Plus LVS34) - Garmin

Support de montage sur rotule 8 degrés (LiveScope™ Plus LVS34) - visuel officiel Garmin 2

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 21%

Garmin

010-13228-02

8-degree ball mount support (LiveScope™ Plus LVS34)

The Garmin 8-degree ball-mount bracket is an accessory designed for the LiveScope™ Plus LVS34 transducer, optimizing its viewing angle. It reduces interference from the trolling motor shaft and improves image clarity, whether for ice fishing or open water. This product complements the standard mounting options for the LVS34 transducer.

Retail priceBenefit from the professional rate

27,37€

27,37€ ~~34,99€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	Ball joint mount
Color	Black
Compatible models	LiveScope Plus LVS34
Finish	Mast
Installation type	Mount on ball joint
Charge maximale	Designed for LiveScope™ Plus LVS34 transducer
Display capacity	0
Kit contents	8-degree ball mount bracket, fasteners included
Product type	Mounting bracket
Accessory Purpose	Optimizing installation of LiveScope™ Plus LVS34 fishfinder transducers
Angle Fixed Degrees	8
Application Environment Detail	Ice fishing, Open water
Cable Routing Guidelines	Leave a clearance of at least 10 cm (4 in) above and below the swivel joint.
Cable Securing Method Recommended	Black electrical tape
Cable Securing Warning	Clamp collars can over-tighten and damage the cable, or cause cable fatigue.
Compatible Chartplotter Software Update Required	Yes
Compatible Device Type Detail	LiveScope™ Plus LVS34 Fishfinder
Included Accessories Specific	Rubber lining
Included Fastener Type	Fairlead
Installation Environment Ventilation Required	Yes
Installation Support Video Url	garmin.com/videos/lvs34
Installation Tool Required Type	Hex key
Installation Tool Size Mm	5
Interference Reduction Purpose	Interference from the trolling motor shaft
Mounting Location Damage Prevention	Must be installed in a location where it will not be subjected to shocks during launching, towing, or storage.
Mounting Location Flexibility	On pole, On mast, On trolling motor shaft
Mounting Options Complement	Perspective, Mast, Shaft
Mounting Orientation Fixed	Fixed
Mounting Permanence Option	Use of low-profile fasteners instead of knobs
Obstruction Interference Mitigation	Reduction of interference from the trolling motor shaft
Service Loop Provision	At least 25 cm (10 in) with the swivel centered on the loop.
Sonar Beam Clarity Enhancement	Position optimized at 8 degrees
Sonar Image Quality Benefit	Clearer and more reliable sonar image
Sonar Module Mounting Considerations	LED visibility, cable connections, non-submersion.
Toolless Adjustment Feature	Yes
Transducer Alignment Requirement	The transducer must be properly angled for the selected view
Trolling Motor Cable Rotation Test Required	Yes
Trolling Motor Shaft Diameter Compatibility Mm	Up to 25 mm and over 42 mm
Warranty Void Conditions Detail	Using third-party or self-made mounts may void the depth sounder's warranty.

Detailed description

The Garmin 8-degree ball mount support (010-13228-02) is an accessory designed to refine the installation of LiveScope™ Plus LVS34 transducers. It serves as a complement to the standard mounting options (perspective, pole, or shaft) provided with the LVS34 transducer, offering specific optimization of the viewing angle.

Viewing angle optimization and interference reduction

Featuring a fixed 8-degree angle, this support allows positioning the LiveScope™ Plus LVS34 transducer to maximize sonar beam clarity. Unlike the perspective mount, which may have an 11-degree angle for versatility, this 8-degree model targets performance precision. Its primary role is to reduce potential interference caused by the trolling motor shaft, ensuring a clearer and more reliable sonar image. This feature is particularly beneficial in environments where physical obstructions can degrade detection quality.

Versatile application for LiveScope LVS34

Designed for versatile use, the Garmin 8-degree support is suitable for both ice fishing sessions and open-water navigation. It installs on a pole or shaft, offering flexibility in integration with existing LVS34 transducer systems. This optimization enables users of the LiveScope series, known for real-time detection capabilities, to fully exploit their equipment by precisely adjusting transducer orientation for various fishing conditions. The support is specifically compatible with the Garmin LiveScope™ Plus LVS34 transducer.

Documentation

Type	Nom
	Installation Notice - LiveScope™ Plus LVS34 Transducer Installation Instructions (EN)

Expert opinion

Pol CONIN

Digital Manager

« Angle optimization for LiveScope LVS34 transducer »

This 8-degree swivel mount for the LiveScope™ Plus LVS34 transducer is an optimization accessory. It is not a primary mounting bracket but a targeted solution for users seeking to refine LiveScope system performance in specific conditions. Its fixed 8-degree angle serves two main purposes: first, to minimize acoustic interference generated by the trolling motor shaft—a common issue that can degrade image quality. Second, it allows for a more direct and less obstructed scan angle, particularly useful for ice fishing where space is constrained, or in open-water scenarios where angle correction is required for optimal clarity. Installation is straightforward, integrating with existing LVS34 transducer mounting systems, and provides an effective solution for more precise detection results.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

8-degree ball mount support (LiveScope™ Plus LVS34)

27,37€

27,37€ ~~34,99€~~

Frequently Asked Questions

Need help? Contact us

What is the Garmin 8-degree ball mount support (010-13228-02) used for?

This mount is an accessory designed to fine-tune the installation of LiveScope™ Plus LVS34 transducers. It serves as a complement to the standard mounting options (perspective, pole, or shaft) provided with the LVS34 transducer, offering specific optimization of the viewing angle.

What is the angle of this mounting bracket?

This Garmin ball-mount bracket has a fixed angle of 8 degrees. It is designed to position the LVS34 transducer for optimal performance.

How does this 8-degree mount compare to the standard perspective mode mount?

Unlike the standard perspective mode mount, which can have an 11-degree angle for greater versatility, this 8-degree model is designed for targeted performance. Its primary role is to optimize the viewing angle for maximum clarity and reduce interference.

What are the benefits of using this 8-degree swivel mount?

The main benefits are:

Optimized viewing angle: It allows positioning the LiveScope™ Plus LVS34 transducer to maximize sonar beam clarity.Reduction of interference: It helps reduce potential interference caused by the trolling motor shaft, ensuring a clearer and more reliable sonar image.

Can this mount be used for ice fishing?

Yes, this Garmin 8° mount is designed for versatile use and is suitable for both ice fishing sessions and open-water navigation.

Is this mount also compatible with open-water navigation?

Yes, absolutely. This mount is designed for versatile use, which includes open-water navigation in addition to ice fishing.

Does the mounting bracket include the LiveScope™ Plus LVS34 transducer?

No, this product is a mounting accessory only. The LiveScope™ Plus LVS34 transducer is sold separately.

Is the bracket angle adjustable once installed?

No, this bracket has a fixed 8-degree angle. It is designed for optimal and constant positioning of the transducer.

What is the SKU reference for this Garmin mounting bracket?

The SKU (Stock Keeping Unit) reference for this mounting bracket is 010-13228-02.

What is the barcode (EAN) of this ball-head mounting bracket?

The barcode (EAN) for this product is 0753759298494.

Which Garmin transducer is this mount compatible with?

This mount is specifically designed to be used with the Garmin LiveScope™ Plus LVS34 transducer.

Can this mount be used with other LiveScope transducer models, such as the LVS32 or LVS36?

The mount is specifically designed for the LiveScope™ Plus LVS34 transducer. For other LiveScope transducer models, it is recommended to check compatibility with the corresponding Garmin accessories or consult the product specifications.

Is this mount compatible with all trolling motors?

This mount is designed to be installed on a trolling motor shaft or a trolling motor arm. Its integration flexibility will depend on the specific dimensions of your motor's shaft or arm.

On which type of mount can this mounting bracket be installed?

This 8-degree ball joint mounting bracket is designed to be installed on a pole or on the shaft of a trolling motor, providing flexible integration options.

Is this mount supplied with installation instructions?

Yes, Garmin products are generally supplied with detailed installation instructions. You can also find guides and support videos on the Garmin website (support.garmin.com).

Do I need specific tools to install this mount?

While specific tools for this mount are not listed separately, general installation of LiveScope transducer accessories may require common tools such as a drill, suitable drill bits, a flathead screwdriver or an 8 mm wrench, and electrical tape or cable ties.

Is it possible to mount the LVS34 transducer directly on the engine shaft without this bracket?

Yes, the LVS34 transducer is supplied with its own standard mounting options (perspective, barrel, or shaft). This 8-degree bracket is an optional accessory to refine the viewing angle and optimize performance.

Does using non-Garmin mounting brackets void the warranty on my LiveScope™ Plus LVS34 transducer?

According to Garmin, using third-party or self-made brackets can cause damage or loss of the transducer. Damage or loss resulting from the use of a third-party or self-made bracket is not covered by the transducer's warranty.

Is this Garmin 8-degree mounting bracket covered by a warranty?

Yes, as a genuine Garmin product, this bracket is covered by Garmin's standard warranty applicable to accessories. For specific warranty details, consult Garmin's warranty terms and conditions.

Which transducers is the Garmin 8-degree ball-mount bracket compatible with, and what are its main advantages?

The Garmin 8-degree ball-mount bracket (part number 010-13228-02) is specifically designed for use with the Garmin LiveScope™ Plus LVS34 transducer.

Its main advantage is optimizing the transducer’s viewing angle with its fixed 8-degree tilt. This design aims to:

Maximize sonar beam clarity. Reduce potential interference from the trolling motor leg, ensuring a clearer and more reliable sonar image.

It complements the standard mounting options (side, leg, or shaft) provided with the LVS34 transducer. This bracket is versatile and can be used for ice fishing or open-water navigation, mounted on a pole or shaft.