LUX SL180, Strip Light, CRGBW, 700mm - Garmin image 1

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 12%

Garmin

010-04368-00

LUX SL180, Strip Light, CRGBW, 700mm

Conçue pour l'éclairage d'ambiance marin, la bande LED Garmin LUX SL180 CRGBW de 700mm offre une illumination CRGBW à spectre complet.

Certifiée IP68 et résistante aux UV/sel, elle nécessite le module pilote Lumishore LUX Strip Light Driver pour fonctionner.

Le produit inclut le revêtement adhésif 3M et les clips de fixation à vis. Il peut être coupé tous les 100 mm et scellé avec le kit de scellement inclus.

Retail priceBenefit from the professional rate

61,40€

61,40€ ~~69,98€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Type de produit	Bande lumineuse
Operating voltage	23-25
Typical power consumption	5 W par mètre
Light color	Blanc froid, Rouge, Vert, Bleu, Blanc chaud
IP rating	IP68
Variateur compatible	Oui
Longueur du ruban	0.7
Densité LEDs / mètre	180.0
Dos adhésif	Oui
Compatible Command Center	Lumishore EOS-LUX Command Center
Control Methods	Interrupteur momentané, Écrans multifonctions (MFD), Écrans Lumishore dédiés, Appareils intelligents
Cuttable	Non
Installation environment	Intérieur, Extérieur, Zones humides
Minimum Bend Radius	50
Permanently Submersible	Non
Required Driver Model	Lumishore LUX Strip Light Driver
UV resistance	Oui
Warranty Duration Years	3
White Color Temperature Range	2700-6500

Detailed description

Designed for marine ambient lighting, the Garmin LUX SL180 CRGBW 700mm strip light provides a full-spectrum CRGBW (cool white, red, green, blue, warm white) illumination solution with adjustable white color temperature from 2700K to 6500K. This 700mm-long model integrates 180 CRGBW LEDs per meter, ensuring uniform and bright lighting on boats. Its power consumption is 5 watts per meter, and it operates on an input voltage of 23 to 25V.

Integration and Control

The LUX SL180 strip light is specifically designed to be used exclusively with the Lumishore LUX Strip Light Driver module, which is mandatory for proper operation and to maintain warranty validity. This requirement positions the LUX SL180 as an integrated component of a broader Lumishore lighting ecosystem, now under Garmin’s umbrella. Lighting control can be achieved via a momentary switch connected to the driver, or more advanced control via compatible multifunction displays (MFD), dedicated Lumishore screens, or smart devices, requiring the Lumishore EOS-LUX Command Center.

Installation and Durability

With an IP68 rating, the Garmin LUX SL180 strip light resists dust and temporary immersion, making it suitable for above-waterline indoor and outdoor installations. It is manufactured with UV- and salt-mist-resistant material, ensuring longevity in marine environments. Installation is facilitated by a 3M adhesive backing and included screw-mount clips. It is essential to respect a minimum bending radius of 50mm on the vertical axis and never bend the strip on the horizontal axis or twist it, as it can be cut every 100mm and sealed with the included sealing kit. This product comes with a three-year warranty.

Documentation

Type	Nom
	Notice d'installation - Guide d'installation réglette lumineuse LUX SL180 CRGBW 700mm (EN)

Expert opinion

Pol CONIN

Digital Manager

« Garmin LUX SL180 marine ambient lighting: CRGBW integration and performance »

The Garmin LUX SL180 CRGBW 700mm LED strip belongs to the Lumishore ecosystem, now integrated into Garmin’s offering, and provides a sophisticated accent lighting solution for marine environments. Its practical value lies in creating customizable lighting ambiences thanks to its full-spectrum CRGBW capability and tunable white LEDs, ideal for passageways, under furniture, or behind ceiling panels where subtle yet effective lighting is required.

Integration is critical: this strip is not a standalone solution. It requires the Lumishore LUX Strip Light Driver control module, which converts input voltage and manages CRGBW colorimetry. This dependency on the driver is a key factor to consider during installation planning, as it involves an additional component and a specific connection, unlike more generic LED strips that can connect directly to a 12/24V source. For outdoor installations or in damp areas, using the provided mounting clips in addition to the 3M adhesive is recommended to ensure durability. It is essential to respect the minimum 50mm vertical-axis curvature and avoid any twisting or horizontal bending, as this could compromise the strip’s integrity.

This product is particularly suited to owners seeking a discreet, controllable accent lighting solution via their compatible Garmin MFD or a Lumishore EOS-LUX Command Center. It is not designed for permanent submersion and can be cut every 100mm and sealed with the included sealing kit. Its UV and salt spray resistance ensures long-term durability, provided it is not exposed to strong direct sunlight.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

LUX SL180, Strip Light, CRGBW, 700mm

61,40€

61,40€ ~~69,98€~~

Frequently Asked Questions

Need help? Contact us

What is the length of this Garmin LUX SL180 LED light strip?

The Garmin LUX SL180 light bar measures 700mm in length.

What lighting colors are available with the LUX SL180 strip?

The LUX SL180 LED strip provides a full CRGBW spectrum, including cool white, red, green, blue, and warm white.

Is it possible to adjust the color temperature of the white on this LED strip?

Yes, the white color temperature is adjustable from 2700K (warm white) to 6500K (cool white).

Is this LED strip UV-resistant?

Yes, the LUX SL180 LED strip is made from UV-resistant material.

Can the Garmin LUX SL180 LED strip be cut to fit a specific length?

No, the LUX SL180 LED light strip is supplied in predefined lengths and factory-sealed to meet IP68 standards. It must not be cut.

Where can the Garmin LUX SL180 LED light strip be installed?

The LUX SL180 light strip is fully sealed with an IP68 protection rating, meaning it can be installed indoors or outdoors, including in damp areas. However, it is not designed for permanent submersion in water.

How to mount the LUX SL180 LED strip?

The light strip can be mounted in several ways:

Using its integrated 3M adhesive tape, after thoroughly cleaning the surface. For outdoor installations, wet areas, or tight bends, it is recommended to use additional mechanical fastenings, placed every 25 to 30 cm and/or on either side of a bend. Stainless steel mounting clips are also available as an option from Lumishore for narrow mounting channels.

Are there any precautions to take when handling or installing the LED light strip?

Yes, several precautions must be observed:

Always ensure the vessel’s power source is disconnected or isolated before installation. The strip must only be bent along the vertical axis with a minimum radius of 50 mm. It is essential not to bend it along the horizontal axis or twist it. Do not apply pressure on the LED area; only grip the edges of the strip. For lengths over one meter, it is recommended to use two people for installation.

What is the minimum bending radius allowed for this LED strip?

The minimum allowed bending radius for the LUX SL180 light strip is 50 mm, and only on the vertical axis. Bending on the horizontal axis or twisting the strip is strictly prohibited.

Should the surface be cleaned before installing the light strip with the 3M adhesive?

Yes, it is imperative to thoroughly clean the mounting surface using IPA (isopropyl alcohol) and ensure it is free of dust and dirt before applying the 3M adhesive tape. Allow the adhesive to cure for 24 hours before powering on the tape.

Which module is required to operate the Garmin LUX SL180 light strip?

La bande lumineuse LUX SL180 est spécifiquement conçue pour être utilisée exclusivement avec le module pilote Lumishore LUX Strip Light Driver. Ce module est impératif pour son bon fonctionnement et pour maintenir la validité de la garantie.

Peut-on connecter cette bande lumineuse à d'autres systèmes de contrôle d'éclairage que ceux de Lumishore ?

Non, la bande lumineuse LUX SL180 doit être connectée uniquement aux modules pilotes Lumishore LUX Strip Light Driver. L'utilisation de produits ou de pilotes tiers est non seulement déconseillée mais annulera également la garantie.

Comment contrôler l'éclairage de la bande LUX SL180 ?

Le contrôle de l'éclairage peut s'effectuer de plusieurs manières :

Via un interrupteur momentané connecté au module pilote Lumishore LUX Strip Light Driver.De manière plus avancée par intégration avec des écrans multifonctions (MFD) compatibles, des écrans Lumishore dédiés ou des appareils intelligents, nécessitant alors le centre de commande Lumishore EOS-LUX Command Center.

Quelle est la tension d'entrée requise pour la bande lumineuse LUX SL180 ?

La bande lumineuse LUX SL180 nécessite une tension d'entrée de 23 à 25V. Il est crucial de l'utiliser uniquement avec les modules pilotes Lumishore LUX Strip Light Driver, car ils sont conçus pour fournir cette plage de tension spécifique.

Est-ce que cette bande lumineuse est compatible avec les écrans multifonctions (MFD) Garmin ?

Oui, le contrôle de l'éclairage de la bande LUX SL180 peut s'effectuer par intégration avec des écrans multifonctions (MFD) compatibles, y compris potentiellement ceux de Garmin, à condition d'utiliser le module pilote Lumishore LUX Strip Light Driver et, pour un contrôle avancé, le centre de commande Lumishore EOS-LUX Command Center.

Quelle est la durée de la garantie pour le système d'éclairage Garmin LUX SL180 ?

Le système d'éclairage Garmin LUX SL180 est couvert par une garantie de trois ans à compter de la date d'achat originale, pour les défauts de fabrication.

Quelles sont les conditions qui peuvent annuler la garantie de la bande lumineuse ?

La garantie sera annulée dans les cas suivants :

Mauvaise utilisation, abus, ou installation incorrecte.Négligence ou dommages causés par des catastrophes (incendie, inondation, tempête, foudre).Installation par du personnel non qualifié.Réparation ou modification non autorisée.Installations non approuvées ou non-conformes aux directives d'installation et d'utilisation.Utilisation avec des pilotes tiers non Lumishore.

La garantie est-elle valide si la bande lumineuse est utilisée avec un pilote d'une autre marque ?

Non, la garantie sera invalidée si la bande lumineuse LUX SL180 est utilisée avec des pilotes tiers. Elle est conçue pour fonctionner exclusivement avec le module pilote Lumishore LUX Strip Light Driver.