Heat shrink tubing with 4:1 adhesive; 4mm; L: 1.2m black
Technical specifications
Technical specifications
| Adhesive Lined | Yes |
| Color | Black |
| Material | Cross-linked polyolefin |
| Minimum Full Recovery Temperature | 125 |
| Minimum Shrink Temperature | 80 |
| Operating temperature | -55°C to +110°C |
| Recovered Internal Diameter Max | 1 |
| Shrink Ratio | 4:1 |
| Sleeve Length | 1.2 |
| Supplied Internal Diameter | 4 |
| Wall Construction | Double hull |
Detailed description
Detailed description
TE Connectivity Raychem ATUM double-wall heat-shrink tubing, cross-linked polyolefin with a hot-melt inner wall. Diameter 4 mm before shrink, 1 mm after, 4:1 shrink ratio, length 1.2 m.
Function of the inner wall
When heated, the outer wall shrinks while the inner wall melts and flows. On cooling, it bonds the tubing to the substrate, creating a continuous seal with no moisture ingress points—unlike a single-wall tubing that only provides mechanical clamping. The adhesive bonds to PVC, polyethylene, rubbers, and aluminum.
Installation temperatures
Shrink starts around 80 °C, but full recovery requires 125 °C. Aim for this temperature with a heat gun; stopping at 110 °C yields partial shrink and incomplete bonding. Once installed, the tubing withstands continuous service from −55 °C to +110 °C.
Characteristics
- Shrink ratio: 4:1
- Supplied inner diameter (expanded): 4 mm
- Inner diameter after free shrink: 1 mm
- Wall thickness after shrink: 1.00 ± 0.28 mm, including 0.50 mm hot-melt wall
- Length: 1.2 m (standard TE 4-foot packaging)
- Material: irradiation cross-linked polyolefin with hot-melt inner wall
- Color: black
- Shrink start: 80 °C — full recovery: 125 °C
- Continuous service: −55 °C to +110 °C
- Dielectric strength: 300 V/mil minimum
- Water absorption: 0.5 % maximum (24 h at 23 °C)
- Weight: 11.1 g
Specifications and approvals
- Raychem RW-2063 (black)
- AMS-DTL-23053/4, class 3
- Outside UL E85381 scope: UL recognition for the ATUM range explicitly excludes sizes 3/1 and 4/1
What the datasheet doesn’t say
TE rates fluid resistance for diesel, hydraulic fluid, and lubricating oil after 24 h at 23 °C. No UV resistance data is published for this range: on exposed decks, treat the tubing as a seal rather than a durable surface protection. The reference is produced in black.
Expert opinion
Expert opinion
Pol CONIN
Digital Manager
« Heat shrink tubing 4:1 with adhesive: Robust sealing in marine environment »
Your payment information and data are processed securely.


