Haut-parleurs marins encastrables M6-100CT-C/S-GmTi - visuel officiel 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 13%

JL Audio

010-03501-00

JL Audio M6-100CT-C/S-GmTi Marine Flush-Mount Speakers

Name: JL Audio M6-100CT-C/S-GmTi Marine Flush-Mount Speakers
Brand: JL Audio
SKU: 010-03501-00
Price: 218.75 EUR
Availability: InStock

The JL Audio M6-100CT-C/S-GmTi marine tweeters add precise highs to a boat audio installation. 1-inch format, 75 W RMS, 91 dB sensitivity, titanium gray finish, flush or surface-mount installation depending on setup.

Retail priceBenefit from the professional rate

218,75€

218,75€ ~~250,00€~~

Tax included. Shipping calculated at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Speaker Diameter In	1
Audio Output Power Rms	75
Peak Power W	150
Audio Sensitivity Db	91
Speaker Tweeter Type	Silk dome
Rgb Color Select	No
Mounting Diameter	54
Mounting Depth	43
IP rating	Waterproof (marine grade)
Color	Gray
Source type	Marine speaker
Cleaning Instructions	Wash with mild soap and rinse with fresh water only.
Included accessories	Gray mounting cups, gray border
Mounting type	Flush-mounted
Operating Temperature Warning	Avoid areas of extreme heat (e.g., engine compartment).
Professional installation recommended	Yes
Speaker Component Type	Tweeter
Speaker Type General	Tweeter
Weight	0.74

Detailed description

The JL Audio M6-100CT-C/S-GmTi are 1-inch marine flush-mount tweeters designed to complement a boat’s audio system with precise, well-projected highs. They suit systems where main speakers lack detail in the upper spectrum or when you want to bring the sound image closer to the helm without adding a full-range speaker.

Audio Performance and Integration

Each tweeter handles 75 W RMS with a sensitivity of 91 dB. The component design allows pairing with a marine amplifier or source, complementing existing JL Audio speakers or subwoofers. The titanium gray finish blends well on dashboards, consoles, or cockpit areas with a technical aesthetic.

Marine Installation

Installation can be flush-mounted with a 54 mm cutout and shallow depth, or surface-mounted depending on setup. Power down the audio system before installation, ensure proper wiring, and avoid extreme heat zones like the engine compartment. Cleaning is straightforward: mild soap followed by freshwater rinse.

Skysat Recommendation

Choose these as a complement to an existing JL Audio system rather than a standalone speaker. First, verify the available power from the amp/source, then position the tweeters at ear height and away from direct spray zones to improve clarity without harsh highs.

Documentation

Type	Nom
	Notice d'installation - Instructions d'installation pour haut-parleurs marins JL Audio M6-100CT

Payment and security

Your payment information and data are processed securely.

JL Audio M6-100CT-C/S-GmTi Marine Flush-Mount Speakers

218,75€

218,75€ ~~250,00€~~

Frequently Asked Questions

Need help? Contact us

Is it recommended to have these speakers professionally installed?

Yes, installing these speakers requires appropriate tools and safety equipment. Professional installation is strongly recommended to ensure correct and secure setup.

What safety precautions should I take before installing the speakers?

Before proceeding with the installation, it is crucial to take the following precautions:

Turn off the audio system. Disconnect the battery of the audio system. Before cutting or drilling, check for any potential obstacles behind the mounting surfaces.

Where should I not mount these marine speakers?

It is imperative not to install this product in the following areas:

An engine compartment.Any other area exposed to extreme heat.In addition, ensure the product is securely fastened to prevent damage or injury under extreme conditions.

What is the required cut-out diameter for flush-mount installation?

The required cutout diameter for flush-mount installation is 2.125 inches (54 mm).

What types of screws are provided with the speakers?

Speakers come with different screw types for mounting:

Screws #10-32 x 1.50 inches (38 mm)
Screws #6 x 5/8 inches (16 mm)
Screws #8 x 5/8 inches (16 mm)

Are these speakers waterproof?

Yes, these speakers are water-resistant. However, it is important to note that they must not be submerged or exposed to high-pressure water jets.

How to properly clean these marine speakers?

To clean these speakers, use mild soap and rinse them only with fresh water.

What is the size of these marine tweeters?

These marine tweeters have a size of 1.00 inch (25 mm).

What is the recommended power rating for these speakers?

The recommended power for these speakers is between 10 and 75 Watts. The maximum power rating is 75 Watts.

What is the sensitivity of these speakers?

The sensitivity of these speakers is 91.0 dB at 1 Watt/1 meter.

What is the mounting type for these speakers?

These speakers can be installed in two ways:

Flush mountSurface mount

Which brand do these speakers belong to?

These speakers are manufactured by JL Audio.

What is the net weight of this product?

The net weight of this product is 0.74 kg.

Can these speakers be used with any marine audio system?

These speakers are marine component tweeters. For optimal compatibility, they must be paired with a marine audio system capable of delivering power between 10 and 75 Watts. It is recommended to check the power specifications of your amplifier or main unit.

Are they compatible with Garmin audio systems?

Although the supplier is Garmin France SAS, these speakers are from the JL Audio brand. To ensure compatibility with a specific Garmin audio system, you must check the power and impedance specifications of your Garmin equipment and compare them with those of the JL Audio speakers.

What is the type of speaker? Is it a complete set or a component?

These are "marine component tweeters". This means they are designed specifically to reproduce high frequencies and are typically used as part of a component audio system alongside other speakers (such as midranges or woofers).

Can the volume of these speakers be adjusted independently?

These speakers are component tweeters. Their volume is typically controlled by the main unit or the amplifier of the audio system to which they are connected. The available information does not indicate the presence of an independent volume adjustment directly on the tweeters themselves.

Are these speakers suitable for use in saltwater?

Yes, as marine speakers, they are designed to withstand marine environments, including exposure to salt water. However, it is essential to rinse them with fresh water after any exposure and not to submerge them or subject them to high-pressure water jets, as specified in the instructions.