Subwoofer marin M6-10IB-S-GwGw-4 - visuel officiel 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

En cours de réapproSave 10%

JL Audio

010-03084-00

Marine subwoofer enclosure M6-10IB-S-GwGw-4

The JL Audio M6-10IB-S-GwGw-4 10-inch (250 mm) marine subwoofer delivers 250 watts RMS for powerful and precise bass in a marine environment. Optimized for infinite baffle installation, it features corrosion- and UV-resistant materials for marine durability. Supplied with a bright white sport grille and stainless steel mounting hardware.

Retail priceBenefit from the professional rate

396,71€

396,71€ ~~439,99€~~

Tax included. Shipping calculated at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Speaker Diameter In	10
IP rating	Waterproof (Marine grade)
Color	White
Cleaning Instructions	Clean with mild soap and rinse only with fresh water.
Enclosure Type	Infinite baffle
Impedance	4
Led Control Type	Adjustable (external controller)
Mounting Location Restriction	Do not enter an engine compartment or an area of extreme heat.
Mounting Pilot Hole Diameter Fiberglass Thick	3.18
Mounting Pilot Hole Diameter Fiberglass Thin	2.78
Mounting type	Flush-mounted
Number Of Fixed Led Colors	7
Operating Voltage Led	12
Professional installation recommended	Yes
Rgb Led Illumination	Yes
Weight	6.65

Detailed description

Designed for low-frequency reproduction in marine environments, the JL Audio M6-10IB-S-GwGw-4 marine subwoofer with a 10-inch (250 mm) driver offers flexible integration thanks to its optimization for infinite baffle applications. It is also compatible with sealed and vented enclosures, adapting to various installation configurations aboard.

Design and acoustic performance

The M6-10IB-S-GwGw-4 subwoofer features a 10-inch (250 mm) driver with a 250-watt RMS power handling and a nominal impedance of 4 ohms. Its polypropylene cone, injected and mica-loaded with UV inhibitors, is paired with a synthetic rubber surround and a high-quality marine-grade progressive spider made of synthetic fiber. The motor system is optimized by JL Audio’s Dynamic Motor Analysis (DMA) technology, reducing distortion and ensuring precise bass reproduction. It offers a linear excursion (Xmax) of 13.2 mm for deep and smooth bass. Sensitivity is 86.1 dB, and the free-air resonance frequency (Fs) is 43.76 Hz. The recommended amplifier power ranges from 75 W to 250 W RMS.

Marine durability and integration

This subwoofer is specifically engineered to withstand marine conditions. Its corrosion- and UV-resistant polymer basket encapsulates the motor system for enhanced protection. The product undergoes rigorous testing in UV and salt spray chambers to ensure long-term reliable performance. It is optimized for infinite baffle applications, requiring at least 56.6 liters (2 cubic feet) of air volume behind it, but can also be mounted in sealed enclosures of 56.6 liters or vented enclosures of 70.8 liters (2.5 cubic feet). Installation requires a mounting depth of 150 mm (5-15/16 inches) and a cutout diameter of 225 mm (8-7/8 inches), with an overall diameter of 273 mm (10.75 inches). Connections are made via gold-plated marine-grade brass terminals, and mounting uses marine-grade stainless steel hardware. A bright white glossy sport grille is included.

Documentation

Type	Nom
	Gabarit de montage - Gabarit d'installation pour subwoofer marin M6-10IB-S-GwGw-4 (EN)
	Notice d'installation - Instructions d'installation pour subwoofer marin M6-10IB-S-GwGw-4 (MUL)

Expert opinion

« JL Audio M6-10IB-S-GwGw-4 Subwoofer: Marine Performance and Integration »

The JL Audio M6-10IB-S-GwGw-4 marine subwoofer stands out for its design focused on installation versatility and acoustic performance in a nautical environment. Its optimization for infinite baffle mounting is a major asset for installations where space is limited, allowing direct installation in a boat bulkhead or structure without requiring a dedicated enclosure. This feature simplifies installation engineering while ensuring sufficient acoustic support, provided the minimum recommended air volume behind the speaker is respected.

The integrated Dynamic Motor Analysis (DMA) technology is crucial for sound fidelity, offering improved motor linearity that results in clearer, less distorted bass, even at high volume levels. This precision is essential for a marine audio system, where ambient noise can mask nuances. The materials used, such as the polypropylene cone with mica fill and UV inhibitors and the corrosion-resistant polymer basket, confirm JL Audio's commitment to marine durability—a key factor for equipment longevity at sea.

For a successful installation, it is imperative to choose an amplifier capable of delivering the recommended RMS power (75W - 250W) to fully exploit the subwoofer's potential without risking damage. While installation is simplified by the infinite baffle option, careful attention must be paid to the rigidity of the mounting surface and waterproofing to maintain the integrity of the audio system and the boat.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Marine subwoofer enclosure M6-10IB-S-GwGw-4

396,71€

396,71€ ~~439,99€~~

Frequently Asked Questions

Need help? Contact us

What is the size of this JL Audio M6 marine subwoofer?

This JL Audio M6 marine subwoofer has a 10" (250 mm) diameter.

Is this subwoofer specifically designed for marine use?

Yes, this subwoofer is designed specifically for reproducing low frequencies in a marine environment.

Is the M6-10IB-S-GwGw-4 subwoofer waterproof?

Yes, this product is water-resistant. However, it must not be submerged or exposed to high-pressure water jets.

What is the net weight of this subwoofer?

The net weight of this subwoofer is 6.65 kg.

Does the installation of this subwoofer require specific tools?

Yes, installing this subwoofer requires appropriate tools and safety equipment. Professional installation is recommended.

What precautions should I take before starting the installation?

Before installation, it is important to turn off the audio system and disconnect the battery of the audio system. Additionally, before cutting or drilling, check for any potential obstacles behind the mounting surfaces.

Where should I not install this subwoofer on my boat?

It is important not to install this product in an engine compartment or any other area of extreme heat. It must also be securely fastened to prevent damage or injury under extreme conditions.

How should I mount the subwoofer for secure installation?

You must mount this product securely to prevent any risk of damage or serious injury, especially in extreme sea conditions.

Are there recommendations for pilot holes during installation?

Yes, for #8 screws, pilot hole recommendations are:

For fiberglass 1/8" thick or less = 7/64"
For fiberglass thicker than 1/8" = 1/8"

Is RGB LED wiring included with the subwoofer?

No, the LED feature requires a separate 12V wiring at each speaker location. Individual wires can be wired to achieve up to seven fixed LED colors.

Is an additional controller required for RGB LED lighting?

Yes, RGB lighting adjustment requires a lighting controller sold separately.

Is fuse protection required for LED lighting?

Yes, you must install a fast-blow inline fuse on the positive wire at the power source end of the LED cable for each speaker to protect the LEDs and speaker from excessive electrical current. Failing to do so could cause a fire.