Subwoofer marin M6-8IB-S-GmTi-4 - visuel officiel 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 13%

JL Audio

010-03275-00

M6-8IB-S-GmTi-4 Marine Subwoofer

Designed for the marine environment, the JL Audio M6-8IB-S-GmTi-4 8-inch (200 mm) subwoofer delivers 200 watts RMS and precise bass reproduction thanks to its infinite baffle design. Its construction incorporates corrosion- and UV-resistant materials for enhanced durability at sea.

Retail priceBenefit from the professional rate

323,75€

323,75€ ~~370,00€~~

Tax included. Shipping calculated at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Speaker Diameter In	8
Audio Output Power Rms	150
IP rating	Marine-grade (saltwater and UV resistant)
Color	Titanium
Enclosure Type	Infinite baffle
Impedance	4
Led Illumination	Yes
Mounting Bolt Circle Diameter	202.438
Cutout diameter	187.325
Mounting Depth	127
Mounting Pilot Hole Diameter Fiberglass Thick	0.125
Mounting Pilot Hole Diameter Fiberglass Thin	2.778
Mounting Screw Size Diameter	4.166
Mounting type	Flush-mounted
Operating voltage	12
Overall Diameter	223.52
Peak Power W	300
Salt water resistance	Yes
Weight	4.33

Detailed description

The JL Audio M6-8IB-S-GmTi-4 marine subwoofer is an 8-inch (200 mm) solution designed for low-frequency reproduction in nautical environments. It features an infinite baffle design, optimized to fit directly into bulkheads or large air-volume cavities without requiring a dedicated enclosure, offering installation flexibility.

Acoustic performance and integration

This subwoofer delivers a continuous power output of 200 watts RMS with a nominal impedance of 4 ohms. It has a sensitivity of 86.8 dB SPL (1W/1m) and a linear excursion (Xmax) of 13.5 mm / 0.53 inches, enabling extended frequency response and precise bass reproduction. The subwoofer is optimized for a recommended air volume of at least 42.5 liters (1.5 cu. ft.) in infinite baffle configuration. DMA (Dynamic Motor Analysis) technology is used to minimize distortion and improve transient performance, ensuring consistent sound quality.

Robust design for marine environments

The M6-8IB-S-GmTi-4 is engineered to withstand marine conditions. It is built with materials resistant to saltwater, corrosion, and UV rays. The cone is made of polypropylene injected and mica-filled (MIPP) with UV inhibitors, while the suspension is synthetic rubber. The corrosion-resistant polymer basket, marine-grade brass terminals, and stainless steel mounting hardware contribute to its durability. The included Gunmetal & Titanium Sport grille is also UV-resistant and can be removed for custom painting.

Detailed technical specifications

Installation dimensions include a cutout diameter of 187 mm (7.375 inches) and a mounting depth of approximately 127 mm (5.00 to 5.07 inches). The total outer diameter is 224 mm (8.8 inches). This subwoofer has a net weight of 3.9 kg (8.7 lbs). It is recommended to install a 750 mA fast-blow inline fuse on the positive power lead (for models equipped with LEDs; this specific model does not include them). Professional installation is recommended to ensure safety and performance.

Documentation

Type	Nom
	Gabarit de montage - Gabarit d'installation subwoofer marin M6-8IB
	Notice d'installation - Instructions d'installation subwoofer marin M6-8IB

Expert opinion

« JL Audio M6-8IB-S-GmTi-4: Marine integration of precise bass »

The JL Audio M6-8IB-S-GmTi-4 8-inch marine subwoofer is a relevant solution for marine audio installations where space for a dedicated enclosure is limited or visual discretion is required. Its infinite baffle design is a major advantage, allowing direct mounting in a bulkhead or a robust surface of the boat, provided sufficient air volume (at least 42.5 liters) is available behind the mounting surface for optimal performance. This approach simplifies installation compared to subwoofers requiring specific sealed enclosures.

This model stands out for its marine-grade robustness, with materials resistant to saltwater, corrosion, and UV, essential for longevity in a marine environment. The absence of integrated RGB LED lighting, unlike other variants in the M6 series, may be a deciding factor for users preferring a more understated aesthetic or managing lighting separately. The integrated DMA technology ensures low-distortion bass reproduction even at high volume levels, which is critical for maintaining audio clarity at sea.

For installation, it is essential to ensure the mounting surface is sturdy and sufficiently thick (e.g., fiberglass at least 0.125 inches) to support the subwoofer's weight and vibrations. The precise 187 mm cutout diameter and 127 mm mounting depth must be strictly adhered to. This subwoofer is suitable for marine installations that can meet the required conditions to fully exploit its potential without an enclosure.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

M6-8IB-S-GmTi-4 Marine Subwoofer

323,75€

323,75€ ~~370,00€~~

Frequently Asked Questions

Need help? Contact us

What is the main function of the JL Audio M6-8IB-S-GmTi-4 marine subwoofer?

The JL Audio M6-8IB-S-GmTi-4 marine subwoofer is designed for low-frequency reproduction in a nautical environment, providing enhanced bass depth to your marine audio system.

What is the diameter of this subwoofer’s speaker?

This subwoofer is equipped with an 8-inch (200 mm) speaker.

Is this subwoofer designed for infinite baffle installation?

Yes, this subwoofer features an infinite baffle design, optimized to fit directly into bulkheads or large-volume cavities on your vessel.

What is the specific feature of this subwoofer's grille?

This model features a Sport-style protective grille with a titanium finish (GmTi).

Is this subwoofer suitable for marine use?

Yes, this product is specifically designed for the marine environment and is water-resistant.

Does the subwoofer have built-in LED lighting?

Yes, this subwoofer features integrated RGB LED lighting, which is an optional feature.

Is this product submersible or resistant to high-pressure water jets?

No, although water-resistant, this product must not be submerged or exposed to high-pressure water jets.

Is professional installation recommended for this subwoofer?

Yes, professional installation is strongly recommended for this product to ensure optimal performance and safety.

What tools and safety equipment are required for the installation?

Installation requires appropriate tools and safety equipment. It is advisable to have the right tools on hand before starting.

What are the recommendations for pilot holes when mounting in fiberglass?

For fiberglass with a thickness of 0.125 inch (approximately 3.175 mm) or less, a 7/64-inch drill bit is recommended. For fiberglass thicker than 0.125 inch, a 1/8-inch drill bit is recommended.

What checks should I perform before cutting or drilling mounting surfaces?

Before cutting or drilling, it is essential to check for potential obstructions (such as cables, pipes, or other components) behind mounting surfaces to avoid any damage.